Emerson PR6426/000-131 CON041 is an evidence-bounded eddy current sensor and DIN-rail converter configuration in the EPRO machinery monitoring installed-base context. Emerson's PR6426 ordering matrix decodes PR6426/000-131 as the no-thread 32 mm sensor without protective hose, with standard mounting plate, no intermediate connector, 8 m total cable and open cable end; Emerson specifies CON041 for open-ended PR6426 sensors.
- Exact requested pair: PR6426/000-131 with CON041
- Sensor configuration: No thread; no protective hose; 80 x 40 mm mounting plate; no intermediate connector; 8 m total cable; open cable end
- PR6426 sensitivity: 2 V/mm +/-1.5% max.
- Standard measuring span: 8.0 mm full span (+/-4.0 mm sensor range)
System role: The PR6426 sensor and CON041 converter form a non-contact shaft-displacement measurement chain for critical turbomachinery. The page publishes only functions and ratings stated by the cited Emerson material; sibling and successor data are not transferred. Architecture boundary: The PR6426 family provides an 8 mm standard full measuring span around a nominal 5.5 mm gap; the standard CON041 row lists PR6426 with an 8.0 mm measuring range and up to 1.5% linearity error. Exact cable, termination, firmware, revision and host dependencies must be checked against the physical assembly and approved project drawings. For maintenance, migration or replacement work, verify identity, companion hardware, wiring, addressing, power, network settings and commissioning tests before returning the loop or node to service. Current formal lifecycle phase, origin, HS code, dimensions and logistics weight remain HOLD without exact Emerson evidence.
Important Notice: Verify the complete Emerson PR6426/000-131 CON041 nameplate, revision and installed-system documentation before use.
Apter Power PR6426/000-131 CON041 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited Emerson official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current Emerson documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for Emerson PR6426/000-131 CON041.
System documentationProvides a source-traceable boundary for rack, network, I/O and termination records.
Commissioning reviewGuides pre-power checks, companion-module verification and controlled functional testing.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read the exact Emerson PR6426 and converter documentation before work. Verify the complete sensor and converter labels, ordering code, machinery channel, material calibration, wiring and hazardous-area design.
1Verify the complete Emerson PR6426/000-131 CON041 nameplate, revision and installed-system documentation before use.
2Confirm the physical labels on both devices and the exact barrier, supply, material calibration and output-range requirements. Do not substitute an extended-range CON041/916 variant unless the project specification explicitly calls for it.
3De-energize and follow the site's approved electrical and process-safety procedure before disturbing hardware or field wiring.
4Back up controller, network, I/O, addressing and configuration data before replacement or firmware work.
5Verify every companion module, termination unit, cable, connector and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented loop, network or functional test and confirm alarms and fail states after work.
8Current formal lifecycle phase, origin, HS code, dimensions and logistics weight remain HOLD without exact Emerson evidence.
Videos
News
Applications
