The IC695CPE300 is a compact, cost-effective programmable automation controller (PAC) central processing unit designed for small-to-medium-scale industrial automation. Depending on the specific catalog number, it features up to 10Mbytes (or 13Mbytes in newer revisions) of user memory alongside non-volatile flash storage. Built with a dual-baseboard topology supporting both a high-speed PCI bus and a standard serial bus, this CPU excels in managing up to 32K discrete I/O points and complex control loops over a flexible, dense network.
Supports up to 512 independent program logic blocks
Supports up to 16 concurrent server/client channels
Dual-baseboard (high-speed PCI bus and standard serial bus) topology
Operating as a reliable control core, the CPU supports up to 512 independent program logic blocks and up to 16 concurrent Modbus TCP server/client channels through its onboard embedded Ethernet interfaces. It is configured and programmed via Proficy Machine Edition (PME) software, supporting standard IEC 61131-3 languages and C blocks. By establishing a unified configuration environment over Ethernet, the CPE300 series ensures deterministic, low-latency data synchronization between the main chassis and localized communication modules, minimizing engineering complexity while maximizing system uptime in demanding process environments.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Emerson IC695CPE300 RX3i CPE330 Controller Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil and Gas Extraction
Serving as Wellhead Control Panels (WHCP) or monitoring compressor stations along natural gas transmission pipelines.
Thermal and Hydroelectric Power
Used in Balance of Plant (BOP) control systems, such as boiler makeup water, ash handling, or turbine auxiliary controls.
Pharmaceuticals
Providing precise batch control of temperature and pressure for reactors, fermenters, and sterile filling lines compliant with FDA regulations.
Chemical and Petrochemical
Executing complex PID regulations and safety interlock logic for continuous distillation columns and blending reactors.
Iron, Steel, and Metallurgy
Controlling blast furnace batching, converter refining, and tension control on hot/cold rolling steel plate production lines.
Pulp & Paper Industry
Performing high-precision multi-axis speed chain and tension coordination across headboxes, press sections, and dryer sections of paper machines.
When using the IC695CPE330, ensure that the firmware version is strictly compatible with the Proficy Machine Edition software version. Verify that the Ethernet ring topology is correctly configured before implementing non-disruptive redundancy switchovers. Confirm the Energy Pack is fully charged before power-offs to guarantee successful data backup. Additionally, never hot-swap the CPU module while the system is energized, and maintain the ambient operating temperature between 0°C and 60°C.
Alternative Names
1C695CPE330IC695CPE33O1C695CPE330IC695CPE33O
Technical notes
The IC695CPE330 is a central processing unit within the PACSystems RX3i architecture, primarily responsible for logic execution and data routing in industrial automation systems. This module incorporates a 1GHz dual-core microprocessor and provides 64MB of user memory dedicated to storing control algorithms, status variables, and configuration parameters. In terms of hardware topology, it features one RJ45 serial port alongside three independent Gigabit Ethernet ports, natively supporting PROFINET, Modbus TCP/IP, and OPC UA secure communications to establish direct connections with field devices and supervisory software.
It is a Central Processing Unit (CPU) for the PACSystems RX3i programmable automation controller (PAC) platform, originally by GE Fanuc and now managed by Emerson.
What is the primary use of the IC695CPE330?
It is used to control complex industrial automation machinery, manufacturing assembly lines, and large-scale process control systems.
How do you use the IC695CPE330 controller?
Install it into an RX3i backplane, connect power and I/O modules, and use programming software to write control logic.
Which programming languages does IC695CPE330 support?
It supports Ladder Diagram (LD), Structured Text (ST), Function Block Diagram (FBD), and C blocks.
What is the processor speed of the IC695CPE330?
It is equipped with a 1GHz dual-core processor for ultra-fast data execution.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.