Which installed hardware must be paired with PR6422-013-041?

Use PR6422-013-041 with the documented Emerson PR6422 5 mm eddy-current measurement system components: PR6422-compatible signal converter, Fine-thread miniature bracket, Small conductive shaft or target.

How should the Sensor family value for PR6422-013-041 be verified?

Confirm the complete nameplate and order code before work; the documented sensor family is PR6422.

What connection detail is critical when installing PR6422-013-041?

Preserve every conductor, connector and shield identity, then follow the model-specific connection arrangement described in the controlling Emerson document.

What configuration record should be retained when replacing PR6422-013-041?

Retain the as-found position, sleeve thread, cable or channel identity, gap or scaling value, diagnostics and final functional-test result.

Can PR6422-013-041 replace a similar Emerson model without engineering review?

No direct substitution should be assumed; verify the full order code, measuring function, interface, cable or channel arrangement and the approved Emerson PR6422 5 mm eddy-current measurement system configuration.

PR6422-013-041 PR6422 5 mm miniature eddy-current displacement sensor

Name: PR6422-013-041
Brand: Emerson
SKU: PR6422-013-041

PR6422-013-041

PR6422 5 mm miniature eddy-current displacement sensor

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for PR6422-013-041

Manufacturer:

Emerson

Product Category:

Machinery Monitoring System

Spare Part Number:

PR6422-013-041

Estimated shipping dimensions:

16x15x4cm

Weight:

0.3 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Sensor family:

PR6422

Sleeve thread:

M6 x 0.5

Armor:

Yes

Probe length Cx:

50 mm

Overall sensor length C:

55.3 mm

Adapter plug:

Included

Total cable length:

10 m

Cable end:

Open ends

Static nominal range:

+/-0.5 mm

Recommended dynamic range:

25 to 250 um p-p

Sensitivity:

16 V/mm

Nominal distance center:

Approximately 0.8 mm

Basic air gap:

0.15 to 0.35 mm

Operating temperature:

-35 to +180 degC; +200 degC short term

Pressure at sensor head:

10,000 hPa

Vibration endurance:

5 g at 60 Hz

Information

Overview Manuals Common Applications Product Precautions

Emerson PR6422-013-041 is pr6422 5 mm miniature eddy-current displacement sensor. It senses shaft-to-probe displacement for a matched Emerson signal converter and machinery-monitoring channel.

Uses a miniature M6 x 0.5 probe sleeve
Provides a ten-metre armored open-ended cable
Offers 16 V/mm nominal sensitivity
Supports narrow-clearance shaft measurements

PR6422-013-041 operates with PR6422-compatible signal converter, Fine-thread miniature bracket, Small conductive shaft or target, Open-end field termination.

Engineered applications include Small-shaft radial vibration, Tight-clearance position sensing, High-sensitivity eccentricity channels, Remote miniature probe installations.

Important Notice: Protect the fine M6 x 0.5 thread, confirm the ten-metre open-end wiring and PR6422 converter range, then set the narrow air gap with controlled mechanical clearance.

Apter Power PR6422-013-041 Manuals and Guides

Apter Power PR6422-013-041 Measurement-System Technical Reference PDF Apter Power PR6422-013-041 Installation, Loop Check and Acceptance Workbook PDF

The first document provides model-specific technical and measurement-system reference data. The second is a separate field workbook for mounting, wiring, commissioning and acceptance records.

Small-shaft radial vibration

Measures relative motion on small-diameter shafts.

Tight-clearance position sensing

Fits restricted probe mounting locations.

High-sensitivity eccentricity channels

Provides high sensitivity for limited displacement spans.

Remote miniature probe installations

Reaches distant cabinet terminals through its ten-metre lead.

Read the applicable Emerson machinery-monitoring instructions before work. Verify PR6422-013-041 and the installed Emerson PR6422 5 mm eddy-current measurement system configuration.

Verify the complete PR6422-013-041 order code, M6 x 0.5 mounting interface and assigned PR6422 5 mm eddy-current system measuring point before work.

Place the monitored machine and its protection channel in the approved maintenance state before disturbing PR6422-013-041.

Protect the probe tip from impact and keep the mounting thread and bracket free from burrs or contamination.

Route the 10 m sensor lead without sharp bends, crushing, tensile load or contact with hot and moving surfaces.

Keep the LEMO or open-end connection clean, dry and fully identified before reconnecting the measurement loop.

Confirm the paired signal converter or monitor input, cable length and target material match the documented measuring chain.

Set the static gap within the documented linear region while preserving shaft and probe mechanical clearance.

Prove polarity, static gap, dynamic response and alarm action before returning the protection channel to service.

FAQS

What measurement or system function does PR6422-013-041 perform?

PR6422-013-041 is a pr6422 5 mm miniature eddy-current displacement sensor. It senses shaft-to-probe displacement for a matched Emerson signal converter and machinery-monitoring channel.
Which installed hardware must be paired with PR6422-013-041?

Use PR6422-013-041 with the documented Emerson PR6422 5 mm eddy-current measurement system components: PR6422-compatible signal converter, Fine-thread miniature bracket, Small conductive shaft or target.
How should the Sensor family value for PR6422-013-041 be verified?

Confirm the complete nameplate and order code before work; the documented sensor family is PR6422.
What connection detail is critical when installing PR6422-013-041?

Preserve every conductor, connector and shield identity, then follow the model-specific connection arrangement described in the controlling Emerson document.
How is PR6422-013-041 mechanically installed without changing measurement behavior?

Protect the probe tip from impact and keep the mounting thread and bracket free from burrs or contamination.
What commissioning test should be completed for PR6422-013-041?

Prove polarity, static gap, dynamic response and alarm action before returning the protection channel to service.
What configuration record should be retained when replacing PR6422-013-041?

Retain the as-found position, sleeve thread, cable or channel identity, gap or scaling value, diagnostics and final functional-test result.
Can PR6422-013-041 replace a similar Emerson model without engineering review?

No direct substitution should be assumed; verify the full order code, measuring function, interface, cable or channel arrangement and the approved Emerson PR6422 5 mm eddy-current measurement system configuration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

PR6422-013-041

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for PR6422-013-041

Technical specifications for PR6422-013-041

Information

Information