-
Match the complete marking
Compare FCD-311-FCD311PT4P66STR1DCF00T62C0 with the installed label and applicable Danfoss documentation.
-
Check the offered item before ordering
Request photos of the offered FCD-311-FCD311PT4P66STR1DCF00T62C0 and compare markings, interfaces and included items with the installed unit.
Technical specifications for FCD-311-FCD311PT4P66STR1DCF00T62C0
-
Manufacturer:Danfoss
-
Product Category:Servo Drives
-
Spare Part Number:FCD-311-FCD311PT4P66STR1DCF00T62C0
-
Weight:0.64 kg
-
Tariff Code:8537101190
-
Product type:Decentral Variable Frequency Drive
-
System context:Danfoss VLT FCD 300 decentralized-drive platform
-
Drive size:FCD 311
-
Application range:P: process
-
Line supply:T4: 3 × 380–480 V
-
Enclosure:P66: IP66 protected enclosure
-
Hardware variant:ST: standard hardware
-
RFI filter:R1: class A1 filter
-
Display connection:DC: display connector plug mounted
-
Serial option:F00: no serial communication option installed
-
Installation box:T62: wall mount, metric thread, double side, service switch
-
Coating:C0: non-coated boards
-
Output current:3.0 A continuous
-
60-second output current:4.8 A
-
Output power at 400 V:2.0 kVA
-
Typical shaft output:1.1 kW / 1.5 hp
-
Input current:2.6 A continuous
-
60-second input current:4.2 A
-
Maximum motor cable cross-section:4 mm² / AWG 10
-
Maximum power cable cross-section:4 mm² / AWG 10
-
Maximum pre-fuse:25 A IEC / 25 A UL
-
Efficiency:96%
-
Power loss at maximum load:59 W
-
Output-frequency range:0.2–132 Hz or 1–1000 Hz
-
Control response time:26.6 ms maximum for terminals 18, 19, 27, 29 and 33
-
Ambient full-load range:0 to 40 °C
-
Storage/transport temperature:-25 to +65/+70 °C
-
Maximum installation altitude:1000 m without stated derating
-
Programmable digital inputs:5
-
Analog current inputs:1
-
Analog current range:0/4–20 mA
-
Maximum analog input current:30 mA
-
Analog input resolution:10 bit
-
Analog input accuracy:1% of full scale maximum error
-
Digital/frequency output current:25 mA maximum
-
Programmable relay outputs:1
-
Maximum motor cable length:10 m
-
Maximum relative humidity:95%
-
Reduced-performance ambient minimum:-10 °C
-
Starting torque:160% for 1 minute
-
High starting torque:180% for 0.5 second
-
Mechanical-brake output:0.8 A maximum
-
Default switching frequency:4.5 kHz
Information
- FCD-311-FCD311PT4P66STR1DCF00T62C0 occupies a defined service position in the Danfoss VLT FCD 300 decentralized-drive platform; approval depends on the complete marking and installed boundary.
Supply and enclosure: T4 380–480 V input with P66 IP66 protection.
Interface execution: DC display connector, F00 without serial option and T62 service-switch installation box.
Within the Danfoss VLT FCD 300 decentralized-drive platform, evaluate FCD-311-FCD311PT4P66STR1DCF00T62C0 together with its carrier, terminals, cables and applicable project or hardware settings. Preserve the as-found interface map and revision evidence; a mechanically similar item is not automatically equivalent.
Commissioning FCD-311-FCD311PT4P66STR1DCF00T62C0 should progress from identity and connection checks to controlled power-up, diagnostics and functional proof. Keep final status, test conditions and unresolved exceptions in the handover record.
-
Danfoss FCD 311 Official Ordering & Technical Data
Original manufacturer excerpt - PDF, 4 pages. Order-code decoding, installation-box execution and FCD 311 electrical data. -
FCD-311-FCD311PT4P66STR1DCF00T62C0 Installation & Commissioning Guide
Apter Power engineering guide - PDF, 5 pages. Replacement sequence, interface checks, commissioning, fault isolation and acceptance record.
Compatibility boundary: Match the complete marking, hardware execution and installed interfaces before replacement.
-
Installed-system replacement
Compare the exact code, host position and connected interfaces with the removed item. -
Planned maintenance
Capture the as-found label, indications and configuration before disturbing the installation. -
Controlled commissioning
Restore documented connections and prove the intended signal, communication or control response. -
Spare qualification
Keep revision, configuration and acceptance evidence with the spare-part record.
Check every token in FCD-311-FCD311PT4P66STR1DCF00T62C0 against the offered label and approved record.
Follow the site procedure for stored energy, field power and electrostatic handling.
Photograph and label carriers, terminals, cables and keying before removal.
Archive applicable Danfoss VLT FCD 300 decentralized-drive platform settings before replacement.
Check connectors, terminal blocks, carriers and cable condition before blaming the module.
Use an approved functional test and retain as-left diagnostic and acceptance evidence.
Alternative Names
Technical notes
Evidence scope: The official FCD 300 manual decodes the complete order string and lists FCD 311 electrical, environmental and installation values.
Installation boundary: The exact installed carrier, terminals, cables and project configuration remain site-specific.
Technical reference: Danfoss VLT Decentral FCD 300 Instruction Manual MG.04.B8.22
FAQ View All FAQ
-
How should FCD-311-FCD311PT4P66STR1DCF00T62C0 be identified before replacement?Compare the complete FCD-311-FCD311PT4P66STR1DCF00T62C0 marking, visible revision, installed position and the documented decentral variable frequency drive role. Do not approve a shortened family reference.
-
What evidence should be recorded before removing FCD-311-FCD311PT4P66STR1DCF00T62C0?Photograph the complete label, connectors, cable routes, status indications and host position for FCD-311-FCD311PT4P66STR1DCF00T62C0; retain the current Danfoss VLT FCD 300 decentralized-drive platform record.
-
How should the interfaces for FCD-311-FCD311PT4P66STR1DCF00T62C0 be checked?Map every connector, terminal and cable used by FCD-311-FCD311PT4P66STR1DCF00T62C0 to the as-found record, then verify keying, shielding and interface ownership before reconnection.
-
What configuration boundary matters when commissioning FCD-311-FCD311PT4P66STR1DCF00T62C0?Use the approved Danfoss VLT FCD 300 decentralized-drive platform configuration for FCD-311-FCD311PT4P66STR1DCF00T62C0. Physical fit alone does not establish electrical, firmware or project equivalence.
-
How can a suspected FCD-311-FCD311PT4P66STR1DCF00T62C0 fault be separated from an external fault?Check host power, mating hardware, field wiring and the applicable signal or communication path before controlled substitution of FCD-311-FCD311PT4P66STR1DCF00T62C0.
-
What should be verified after installing FCD-311-FCD311PT4P66STR1DCF00T62C0?Confirm normal indications, interface continuity and the intended decentral variable frequency drive response for FCD-311-FCD311PT4P66STR1DCF00T62C0 in an approved test state.
-
Can FCD-311-FCD311PT4P66STR1DCF00T62C0 be replaced by a similar-looking unit?Appearance is not an equivalence criterion for FCD-311-FCD311PT4P66STR1DCF00T62C0; compare the complete order code, revision, connectors and installed configuration.
-
What handover record is appropriate after work on FCD-311-FCD311PT4P66STR1DCF00T62C0?Retain the offered and removed FCD-311-FCD311PT4P66STR1DCF00T62C0 markings, connection photographs, configuration evidence, diagnostics, functional-test results and open exceptions.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
FCD-311-FCD311PT4P66STR1DCF00T62C0Product Details -
2MBI600VXA-120E-51Product Details -
6K2-NK 1061926Product Details -
600-0112 REV 01-CE2-VAC1AA0AAA-SMS1000Product Details -
6DD1640-0AH0Product Details -
SL-760Product Details -
ADM-1815BP-MICROBOX-6824AProduct Details -
6SM37S-6000-GProduct Details -
MDSKSRS036-13Product Details -
NP1L-TMBProduct Details
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.



