Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for TK-3E 177313-02-01
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for TK-3E 177313-02-01
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:177313-02-01
-
Estimated shipping dimensions:30x25x20cm
-
Weight:5.14 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Drive type:Electric
-
Scale units:Metric
-
Power cord:American
-
Power:95-125 Vac or 190-250 Vac, 50/60 Hz
-
Vibration amplitude range:50-254 um peak-to-peak
-
Maximum wobulator speed:0-5000 cpm +/-1000 cpm
-
Micrometer range:0-25.4 mm
-
Probe diameter range:5-19 mm
-
Target material:AISI 4140 alloy steel
-
Operating temperature:0-50 deg C
-
Closed-case exposure:IP54 design
Information
Overview
Manuals
Common Applications
Product Precautions
This bench instrument provides a controlled mechanical target for confirming proximity-system response before a monitored channel is returned to service.
- Combines static position checking with dynamic vibration simulation
- Accepts multiple proximity-probe diameters in a universal mount
- Generates a known mechanical wobble signal without requiring an oscilloscope
- Supports field verification of transducer output and monitor indication
Set TK-3E 177313-02-01 on a stable work surface, secure the probe mount and keep personnel clear of the motor-driven wobble plate. Use the metric micrometer and a voltmeter to establish known mechanical displacement before comparing monitor readings.
Important Notice: Verify TK-3E 177313-02-01, metric scale, American cord, supply voltage, guards, probe diameter and mounting, target material, micrometer zero, wobble amplitude and the documented comparison between probe output and monitor reading.
Apter Power TK-3E 177313-02-01 Manuals and Guides
- Apter Power TK-3E Metric Test-Kit Technical Reference
- Apter Power Proximity Calibration and Wobble-Plate Test Workbook
The first document is a model-specific engineering data reference. The second is a distinct installation and commissioning workbook with field checks and acceptance records.
Proximity probe calibration checks
Moves a target in measured increments while the probe output is recorded.
Vibration monitor verification
Applies a known wobble-plate displacement so the displayed vibration value can be compared.
Position channel checkout
Supports static gap and position verification before a channel is returned to machinery service.
Maintenance-shop transducer testing
Provides a controlled bench method for assessing a probe, extension cable and Proximitor sensor loop.
Read the applicable Bently Nevada installation information before work. Verify TK-3E 177313-02-01 and the installed Electric-Driven TK-3e Proximity System Test Kit configuration before isolation, wiring or commissioning.
1
Confirm TK-3E and 177313-02-01 markings, metric scale and American cord.
2
Inspect the power cord, enclosure and protective covers before energizing the kit.
3
Place the unit on a stable surface and secure all mounting screws.
4
Wear eye protection and keep loose clothing away from the rotating wobble plate.
5
Clamp the probe in the universal mount without damaging its body or cable.
6
Use the micrometer only within its documented travel and record probe voltage at each point.
7
Keep hands and tools clear while changing wobulator speed or amplitude.
8
Compare the known mechanical input with monitor indication and document the final result.
Technical notes
Set TK-3E 177313-02-01 on a stable work surface, secure the probe mount and keep personnel clear of the motor-driven wobble plate. Use the metric micrometer and a voltmeter to establish known mechanical displacement before comparing monitor readings.
FAQ View All FAQ
-
What do the supplied ordering segments specify for TK-3E 177313-02-01?The official ordering table identifies 02 as metric scale units and 01 as an American power cord.
-
What is the main purpose of TK-3E 177313-02-01?It simulates shaft position and vibration to check proximity transducer systems and monitor calibration.
-
What probe sizes can be held by TK-3E 177313-02-01?The universal probe mount accommodates probe diameters from 5 mm to 19 mm.
-
Is an oscilloscope required to use TK-3E 177313-02-01?The documented wobble-plate procedure can use probe scale factor and a multimeter to establish the desired mechanical vibration.
-
What safety hazard applies to TK-3E 177313-02-01?The motor-driven wobble plate is rotating machinery; guards, eye protection and clearance from loose objects are required.
-
How is static position checked with TK-3E 177313-02-01?Use the removable spindle micrometer to move the target in calibrated metric increments and record Proximitor output.
-
How should dynamic verification be documented for TK-3E 177313-02-01?Record the selected peak-to-peak mechanical input, wobulator speed, probe scale factor and monitor indication.
-
What should be inspected before storing TK-3E 177313-02-01?Disconnect power, stop rotation, clean the mounts and confirm the enclosure and accessories are secured.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.