Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 990-16-XX-01-CN 106M1675-01
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 990-16-XX-01-CN 106M1675-01
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:990-16-XX-01-CN 106M1675-01
-
Estimated shipping dimensions:10x7.3x6cm
-
Weight:0.46 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Product Family:990 vibration transmitter
-
Transducer Input:One matched 3300 NSv probe and extension cable
-
Conditioning:Integrated Proximitor circuitry
-
Process Output:4-20 mA two-wire loop
-
Supply at Transmitter:+12 to +35 VDC
-
Loop Accuracy:Within +/-1.5% of full scale under stated test conditions
-
Maximum Loop Resistance:1000 ohm including cable at 35 VDC
-
Current Limiting:23 mA typical
-
Not OK Output:Below 3.6 mA after a Not OK condition
-
Diagnostic Output:Non-isolated PROX OUT / COM and coaxial connector
-
Frequency Range:5 to 6000 Hz for the matched transducer system
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 990-16-XX-01-CN 106M1675-01 adds a documented vibration transmitter execution to the installed machinery-monitoring path.
- Provides a two-wire 4-20 mA vibration output for process-control integration.
- Includes the Proximitor conditioning stage inside the transmitter assembly.
- Offers a local PROX OUT diagnostic signal for approved test equipment.
- Retains all special order fields without borrowing a standard 990 range or system length.
The loop output, diagnostic signal and matched 3300 NSv chain must be checked together. Standard 990 family limits are used only as family reference; the special range, length and approval fields require their controlled record.
Important Notice: Use the standard 990 data only as family reference; do not assign range, electrical length or approval meaning to unresolved special fields.
Bently Nevada 990-16-XX-01-CN 106M1675-01 Manuals & Downloads
Official 990 Vibration Transmitter Datasheet Excerpt (PDF)Bently Nevada 990-16-XX-01-CN 106M1675-01 Installation & Commissioning Guide (PDF)
The Technical Reference organizes the exact ordering identity, applicable characteristics and system boundary for this vibration transmitter. The Installation & Commissioning Guide covers identification, pre-installation checks, connections, functional verification and the acceptance record.
Pump and fan monitoring
Send a continuous vibration value to a PLC or DCS analog input.
Compact machine panels
Use the integrated conditioning where a rack monitor is not part of the design.
Compressor auxiliaries
Trend shaft vibration through a matched NSv transducer chain.
Loop diagnostics
Use the PROX OUT connection for qualified setup and troubleshooting.
Use the complete Bently Nevada 990-16-XX-01-CN 106M1675-01 identity and the applicable controlled procedure before work.
1
Verify the complete 990-16-XX-01-CN 106M1675-01 identity before replacement.
2
Do not assign a standard full-scale value to code 16 without the special record.
3
Do not select a system length for XX by analogy with 50 or 70.
4
Keep the matched NSv probe and extension cable together with the transmitter.
5
Verify loop supply and total resistance before energizing.
6
Use isolated test equipment or the approved adapter at PROX OUT.
7
Treat CN and 106M1675-01 as controlled identifiers until decoded.
8
Verify loop current, Not OK behavior, PROX OUT signal and receiving-channel scaling before release.
Technical notes
Use the standard 990 data only as family reference; do not assign range, electrical length or approval meaning to unresolved special fields.
FAQ View All FAQ
-
What product family is Bently Nevada 990-16-XX-01-CN 106M1675-01?It is a special-identifier member of the 990 two-wire vibration-transmitter family.
-
What output does Bently Nevada 990-16-XX-01-CN 106M1675-01 provide?The 990 family provides a 4-20 mA two-wire output proportional to configured vibration full scale.
-
Which sensor chain is used by Bently Nevada 990-16-XX-01-CN 106M1675-01?The transmitter uses one matched 3300 NSv probe and extension-cable system.
-
What does code 16 mean on Bently Nevada 990-16-XX-01-CN 106M1675-01?The standard supplied ordering table does not list 16, so no full-scale value is assigned here.
-
What does XX mean on Bently Nevada 990-16-XX-01-CN 106M1675-01?The system-length field remains unresolved and must be checked against the special item record.
-
What does CN mean on Bently Nevada 990-16-XX-01-CN 106M1675-01?The suffix is preserved exactly; its approval meaning is not inferred from a nearby standard code.
-
What is 106M1675-01 on Bently Nevada 990-16-XX-01-CN 106M1675-01?It is retained as part of the supplied identity, without an unsupported function or modification claim.
-
What confirms commissioning of Bently Nevada 990-16-XX-01-CN 106M1675-01?Confirm the exact transducer chain, loop supply, 4-20 mA scaling, Not OK response and diagnostic signal.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.