330904-00-05-05-01-IN

Part prefix 330904 selects a M8 x 1 case with stainless steel lead armor. The selected unthreaded section is 0 mm, within an overall 50 mm case. The NSv probe uses TipLoc tip molding and CableLoc cable attachment rated at 220 N (50 lb) pull strength. Gold-plated ClickLoc contacts lock together; the connector protector helps exclude liquid from the probe-to-cable joint.

Option 05 provides a 0.5 m lead. Code 01 supplies a clickloc connector with protector; keep this connection clean and match it to the extension cable. Only a matched NSv probe, extension cable and Proximitor sensor establish measurement performance. For the complete calibrated system, the manufacturer specifies 7.87 V/mm (200 mV/mil) average scale factor and a 1.5 mm (60 mil) linear range, approximately 0.25 to 1.75 mm from a suitable target.

The trailing IN is preserved as supplied and has no assigned interpretation here. Confirm the physical marking and any required approvals before ordering. Gap, scale factor and linear range apply to the matched 3300 XL NSv system. The NSv system addresses restricted counterbore and side-view installations, including small shafts and flat axial targets. Supported system applications include radial vibration or position, thrust position and speed or phase reference; the installed target and monitor channel determine which measurement is used.