With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 74712-06-05-02-01 is a Seismoprobe High-Temperature Velocity Transducer manufactured by Bently Nevada. It is primarily used to measure the absolute mechanical vibration velocity of bearing housings or casings on large industrial rotating machinery—such as steam turbines, gas turbines, fans, and compressors—helping enterprises with equipment health monitoring and fault early warning.
Utilizes a two-wire configuration
Spiral connection machine, increased signal strength
No external power needed, self-powered operation simplifies remote and portable measurement wiring
Bently Nevada Seismoprobe Velocity Transducer Systems are designed to measure absolute (relative to free space) bearing housing, casing, or structural vibration. The two-wire systems consist of a transducer and appropriate cable. The Seismoprobe family of velocity transducers is a two-wire design that uses moving-coil technology. It provides a voltage output directly proportional to the transducer's vibration velocity.
Moving-coil transducers are less sensitive to impact or impulsive excitation than solid-state velocity transducers, which are inherently accelerometers with embedded integration electronics. Moving-coil transducers are less sensitive to impact or impulsive excitation and can represent a good choice for certain applications. Because they don’t require external power, they are convenient for portable measurement applications.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 74712-06-05-02-01 High-temperature Two-wire Transducer Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Coal-Fired Power Generation
Mounted on bearing housings of large steam turbines, turbogenerators, and high-pressure boiler feedwater pumps.
Oil Refining
Utilized on the casings of high-temperature rich-gas compressors, main air blowers in Fluid Catalytic Cracking (FCC) units, and various high-temperature crude oil transfer pumps.
Petrochemical
Applied to the bearing casings of the "Three Major Compressors" (cracked gas, propylene, and ethylene compressors) in ethylene plants, as well as extrusion pelletizing trains.
Steel & Metallurgical Industry
Secured to blast furnace blowers, sintering exhaust fans, Top Gas Recovery Turbine (TRT) units, and the main motors/gearbox housings of hot rolling mills.
Hydroelectric Power
Installed on upper/lower guide bearings, thrust bearing pedestals, and the upper/lower bracket structures of hydroelectric generating units.
Pulp & Paper
Used on the bearing housings of paper machine drying cylinders, drying section exhaust fans, and high-pressure refiner casings.
When operating the 74712-06-05-02-01 high-temperature velocity transducer, four core precautions must be strictly observed.
First, due to its internal moving-coil design, installation must strictly adhere to the 0°±100° vertical or near-vertical orientation limit because excessive tilt causes internal mechanical binding and measurement distortion.
Second, factory-specified high-temperature heavily shielded 2-conductor cabling must be utilized, with routine checks on the top-mount connector's seal to prevent moisture ingress, ensuring the connector is never submerged in liquid.
Third, rigid mounting must strictly follow official torque specifications to avoid base instability or overtightening that could strip the integrated 1/2-20 UNF stud.
Lastly, because the mechanical moving-coil suffers physical wear under prolonged high-frequency vibration, a periodic off-line calibration regime must be established to guarantee the ongoing accuracy of its nominal sensitivity and low-frequency responsiveness.
The 74712-06-05-02-01 Seismoprobe velocity transducer, a specialized two-wire system with a 20 mV/mm/s (500 mV/in/s) nominal sensitivity, measures absolute casing and structural vibration for large industrial machinery across a frequency range of 10 Hz to 1,000 Hz. Utilizing robust moving-coil technology to convert movement directly into a proportional voltage output, it can operate efficiently in extreme thermal environments from -29°C to +204°C (-20°F to +400°F). Unlike solid-state alternatives, its design offers superior resistance to impact and impulsive excitation—withstanding up to 50 g peak mechanical shock—while its 0°±100° mounting angle flexibility and integrated 1/2-20 UNF-3A stud provide a reliable, self-powered solution suitable for both permanent installation and portable, route-based monitoring.
It is a high-temperature, two-wire velocity transducer manufactured by Bently Nevada, used to measure the absolute casing vibration of industrial equipment.
What is the working principle of 74712-06-05-02-01?
It utilizes moving-coil technology. An internal coil moves within a magnetic field during vibration, generating a voltage output directly proportional to the vibration velocity.
How to install and use the 74712-06-05-02-01 product?
Thread it directly onto the vertical (0°) surface of the machine casing or bearing housing using its 1/2-20 stud, and connect it to a monitor via a two-wire cable.
Does 74712-06-05-02-01 require an external power supply?
No. Moving-coil transducers are self-generating and do not require external power for portable measurements.
What is the frequency response range of 74712-06-05-02-01?
：The minimum operating frequency for this specific configuration (06) is 10 Hz (600 cpm), and the maximum frequency typically extends up to 1 kHz.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
