With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 16710-46 is a 46ft (14m) armored cable for the 330450 HTAS, linking the sensing head directly to remote electronics. Its continuous length eliminates intermediate connectors to eradicate traditional joint failures and ensure uninterrupted data transmission.
Internal 22 AWG shielded conductors for cold resistance and noise rejection
Features a three-socket Mil-C-5015 hermetic connector for a secure, gas-tight sensor interface that blocks toxic and flammable gases
46ft continuous length directly links sensor to module without intermediate joints, eliminating contact and water ingress failures
The 330450 High Temperature Acceleration System (HTAS) segregates the sensing element from the signal conditioning electronics, with the two permanently connected via a hardline cable. Due to the segregated design, the signal conditioning electronics can be installed in a cooler location. This achieves overall transducer system performance comparable to other acceleration transducers, but permits use at significantly higher temperatures. To bridge the structural gap between these segregated modules and transfer the critical data out of the hot zone, a robust external interconnecting link is vital.
Manufactured with 22 AWG shielded conductors and a rugged stainless steel armor jacket, this cable—the Bently Nevada 16710-46—delivers exceptional durability against mechanical stress, chemical exposure, and extreme heat up to +400°C. One end features a three-socket Mil-C-5015 hermetically sealed connector, establishing a secure, gas-tight interface with the sensor, while the opposite end provides terminal lugs to facilitate direct integration into monitoring racks or local junction boxes.
Whether deployed in gas turbine exhaust sections, steam turbine casings, or reciprocating compressor cylinders, the Bently Nevada 16710-46 maintains raw signal integrity over its full 46-foot span. Regarding regional compliance, the cable satisfies installation specifications for both intrinsic safety (Ex ia IIC T4) and non-incendive (Ex nL/ec) methods, making it suitable for hazardous locations requiring ATEX, IECEx, or CSA certification, ensuring long-term stability of the electrical pathway under harsh operational states.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 16710-46 Armored Interconnect Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Power Generation
Transmits vibration signals from accelerometers mounted on gas turbine exhaust sections and high-temperature steam turbine casings, withstanding continuous thermal radiation.
Petrochemical & Refining
Connects vibration monitoring sensors on heavy-duty reciprocating compressor cylinders near hydrocracking reactors and high-temperature distillation columns.
Iron & Steel Metallurgy
Conveys raw sensor signals across areas full of flying hot slag and extreme heat, such as hot rolling mills, blast furnace top fans, and turbo-blowers.
Chemical Processing
Utilizes its stainless steel armor to resist corrosive chemical vapors while delivering vibration data from high-temperature cracking furnaces and reactor agitator drives.
Pulp & Paper
Used for wiring vibration sensors inside paper machine dryer sections and around steam-tight heating systems to withstand high-temperature humid steam.
Geothermal Power Plants
Resists high-thermal geothermal steam and corrosive sulfides on steam turbine units and injection pumps directly driven by geothermal energy.
When installing and operating the 16710-46 cable, it is mandatory to strictly adhere to its bending radius limits to prevent damage to the internal 22 AWG conductors and the external stainless steel armor jacket from over-bending or twisting.
During mating with the sensor body via the Mil-C-5015 hermetic connector, ensure the interface is clean and uncontaminated, and lock it using the specified thread torque to establish a reliable, gas-tight physical seal. Furthermore, across its full 46-foot routing path, the cable must be properly secured to metal trays or brackets to eliminate physical tension from long-distance suspension and to prevent terminal lugs from fatigue loosening caused by continuous machinery vibration.
For hazardous area deployments, the actual wiring method must align strictly with the site-specific intrinsic safety or non-incendive technical layout drawings.
Alternative Names
Alternative Names
16710 46I6710-46167I0-461671O-46
Technical notes
Technical notes
Bently Nevada 16710-46 is a 46ft continuous armored cable (22 AWG/FEP) for the 330450 HTAS, supporting up to +400°C. It features a gas-tight Mil-C-5015 connector to eliminate intermediate joint failures and block hazardous gas ingress, compliant with ATEX/IECEx/CSA.
The 16710-46 is an industrial-grade stainless steel mounting stud (threaded adapter) manufactured by Bently Nevada, featuring a 3/8-24 UNF fine thread on one end and a standard mounting thread on the other.
What product category does the 16710-46 belong to?
It belongs to the mounting accessories for vibration monitoring systems, specifically categorized as a transducer mounting stud or a mechanical fastening component.
How to use products like the 16710-46?
Thread one end into the pre-drilled threaded hole on the machine surface, and screw the opposite end into the bottom mounting hole of the vibration sensor to secure the sensor firmly onto the machine.
Which sensors are typically paired with the 16710-46?
It is commonly paired with Bently Nevada's 330400 or 330425 accelerometers, as well as 190501 velocity sensors that require a 3/8-24 thread interface.
What role does the 16710-46 play in system connection?
It acts as a rigid physical bridge between the machine casing and the sensor body, transmitting the machine's mechanical vibrations to the sensor without loss.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
