Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 3500/22M 146031-02
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 3500/22M 146031-02
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:146031-02
-
Estimated shipping dimensions:2.4x11x33cm
-
Weight:0.42 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Ethernet:100Base-FX full-duplex multimode
-
Standard:IEEE 802.3u
-
Module connector:MT-RJ male
-
Required cable connector:MT-RJ female
-
Maximum cable length:2000 m
-
Protocols:BN Host and BN TDI over TCP/IP
-
Operating temperature:-30 to +65 degC
-
Humidity:95% non-condensing
-
Rack space:1 full-height rear slot
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 146031-02 is the 100Base-FX fiber-optic I/O module for the 3500/22M Transient Data Interface. It uses full-duplex multimode Ethernet and an MT-RJ male module connection.
- Full-duplex 100Base-FX Ethernet
- Multimode fiber interface
- MT-RJ module connection
- Up to 2000 m published fiber length
Install 146031-02 in the full-height rear slot matched to the TDI and use a multimode cable with an MT-RJ female mating connector. Verify polarity, cleanliness, grounding and the documented maximum fiber distance before enabling host data transfer.
Important Notice: Confirm quotation scope, physical marking, included accessories and installed-system compatibility before work.
Apter Power 146031-02 Manuals and Guides
Apter Power 146031-02 Product Technical ReferenceBently Nevada 3500/22M TDI Datasheet 161581 Rev. AC
Important Notice: The first document is an Apter Power model-specific technical reference; the second link is the unmodified official manufacturer publication.
Long-distance System 1 link
Extends TDI host communication over multimode fiber within the published distance.
Electrically isolated plant network
Uses optical media between the rack and compatible host network equipment.
High-interference environments
Provides fiber transport where copper network exposure is undesirable.
Fiber TDI rear-I/O replacement
Restores the specified 100Base-FX interface behind the installed 3500/22M.
Read the applicable Bently Nevada documentation before work. Verify 146031-02 from the physical marking and the installed system record.
1
Confirm the complete 146031-02 marking before installation.
2
Remove a 3500/20 RIM I/O before installing the TDI I/O arrangement.
3
Use only one primary TDI network I/O module at the TDI position.
4
Use multimode 100Base-FX cable with an MT-RJ female connector at the module.
5
Keep the fiber route within the published 2000 m maximum.
6
Inspect and clean both optical faces and verify transmit/receive polarity.
7
Preserve the approved Signal Common and rack-ground arrangement.
8
Prove optical link, TCP/IP communication, rack access and dynamic-data transfer before release.
Technical notes
Install 146031-02 in the full-height rear slot matched to the TDI and use a multimode cable with an MT-RJ female mating connector. Verify polarity, cleanliness, grounding and the documented maximum fiber distance before enabling host data transfer.
FAQ View All FAQ
-
What distinguishes 146031-02 from the copper TDI I/O execution?146031-02 provides full-duplex multimode 100Base-FX fiber Ethernet rather than an RJ-45 copper interface.
-
Which mating connector is required at 146031-02?The module has an MT-RJ male connection, so the fiber cable must use an MT-RJ female connector.
-
What is the maximum multimode distance for 146031-02?The current manufacturer datasheet permits up to 2000 metres or 6560 feet.
-
Which Ethernet standard applies to 146031-02?Its 100Base-FX interface conforms to IEEE 802.3u.
-
What optical checks should precede power-up of 146031-02?Inspect and clean the MT-RJ faces, verify transmit/receive polarity, cable type, bend control and end-to-end loss.
-
Can 146031-02 and 146031-01 be installed simultaneously as primary TDI network interfaces?No. The TDI supports only one primary Transient Data Interface network I/O module at a time.
-
Does 146031-02 change the TDI host protocols?No. It still transports BN Host Protocol and BN TDI Protocol using Ethernet TCP/IP.
-
Which final records belong to a 146031-02 fiber acceptance test?Retain connector inspection, polarity, route length, link state, IP communication, configuration access, data transfer and final diagnostics.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.