The 3500/65 145988-02 172109-01 is a hardware combination specifically designed for temperature monitoring.145988-02 is the main module of this module.172109-01 is the matching I/O module.
Supports multiple industry standard sensors
A single module can support 16 channels of temperature input
Capable of monitoring the temperature difference between two channels
The Bently Nevada 3500/65 monitor provides 16 channels of temperature monitoring and accepts both resistance temperature detector and isolated tip thermocouple temperature inputs. The monitor conditions these inputs and compares them against user-programmable alarm setpoints. The monitor is programmed using the 3500 Rack Configuration Software. You can configure the 16-Channel Temperature Monitor to accept isolated tip thermocouples, 3-wire RTD, 4-wire RTD, or a combination of TC and RTD inputs. In Triple Modular Redundant configurations, you must install temperature monitors in groups of 3 adjacent monitors. In this configuration the monitor uses 2 types of voting to ensure accurate operation and to avoid single point failures.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 3500/65 145988-02 172109-01 16-Channel Temperature Monitor Module Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas
Temperature tracking of Thrust Bearings in multi-stage centrifugal compressors to avoid catastrophic mechanical failure.
Power Generation
Monitoring Stator Winding and Bearing temperatures in large generators to prevent insulation breakdown.
Chemical Industry
Monitoring the thermal state of Process Pumps handling volatile or corrosive fluids.
Steel & Metallurgy
Measuring temperature on Main Drive Motors of rolling mills to manage heat load during heavy production.
LNG Industry
Monitoring Cryogenic Pump bearings to ensure they operate within safe temperature limits during gas liquefaction.
Pulp & Paper
Tracking the temperature of Drying Cylinder bearings to prevent fire hazards and bearing seizure.
When using the Bently Nevada 3500/65 temperature monitor combination, ensure that the hardware suffixes of the main and I/O modules match strictly, and accurately define the sensor type (RTD or Thermocouple) for each channel in the configuration software. It is crucial to prioritize the accuracy of Cold Junction Compensation on the I/O module and periodically check the tightness and shield grounding of external terminal wiring to prevent temperature reading drifts or nuisance alarms caused by electromagnetic interference or contact resistance.
It is a 16-channel temperature monitoring system. The 145988-02 is the main processing module (front), and the 172109-01 is the I/O module (rear) used for external signal connections.
What types of sensors can the 3500/65 145988-02 172109-01 monitor?
It supports RTD (Resistance Temperature Detector) and TC (Thermocouple) signals to monitor temperatures in bearings, windings, or industrial processes.
What is the primary application of the 3500/65 145988-02 172109-01?
It is primarily used for machinery asset protection, triggering alarms or shutdown logic when temperatures exceed safety thresholds.
How many outputs does the 3500/65 145988-02 172109-01 provide?
It monitors 16 inputs and transmits alarm statuses and data via the rack backplane to relay modules or communication gateways.
Are there firmware requirements for the 3500/65 145988-02 172109-01?
Yes, it typically requires 3500 system firmware version 1.50 or higher to ensure the 172109-01 functions correctly.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.