Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 130118-0050-02
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 130118-0050-02
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:130118-0050-02
-
Estimated shipping dimensions:29x19x4cm
-
Weight:0.7 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Interface:RS232 Serial Communication
-
Data Rate:Up to 38.4 k baud
-
Application:Connects host PC to 3500/20 (RIM) or 3500/22M (TDI)
-
Operating Temperature:-30°C to +65°C
-
Efficiency:95%
-
Cable Length:50 feet (15 metres)
-
Assembly Instructions:Assembled
Information
Overview
Manuals
Common Applications
Product Precautions
The 130118-0050-02 is an RS232 serial communication cable belonging to the 3500 Machinery Protection Systems series. This assembly contains a multi-conductor shielded cable terminating in standard D-sub connectors to establish a physical serial link between a host computer and a 3500 rack interface module. Within this complete part number, 130118 denotes the base model for host-to-rack communication, -0050 signifies a physical cable length of 50 feet, and -02 represents the standard connector configuration option.
- 50-foot long-distance RS232 transmission
- Multinational joint explosion-proof certification
- Direct connection between host computer and Rack Interface Module (RIM)
The RIM supports compatible Bently Nevada external communications processors such as TDXnet, TDIX, and DDIX. While the RIM provides certain functions common to the entire rack, the RIM is not part of the critical monitoring path and has no effect on the proper, normal operation of the overall monitoring system. One RIM is required per rack.
For Triple Modular Redundant (TMR) applications, the 3500 System requires a TMR version of the RIM. In addition to all the standard RIM functions, the TMR RIM also performs "monitor channel comparison." The 3500 TMR configuration implements monitor voting using the setup specified in the monitor options. Using this method, the TMR RIM continually compares the outputs from three (3) redundant monitors. If the TMR RIM detects that the information from one of those monitors is no longer within a configured percentof the information of the other two monitors, it will flag that the monitor is in error and place an event in the System Event List.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 130118-0050-02 Host Computer to 3500 Rack Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil and Gas Exploration
Connects the 3500 monitoring system within the control room to configure and debug vibration trip setpoints for large water injection pumps and gas export compressors on offshore platforms.
Petrochemical and Refining
Transfers real-time alarm events and trend data from critical ethylene and hydrocracking compressor trains to a host computer via the serial interface for offline diagnostics.
Thermal Power Generation
Provides a serial link between the central control room and the steam turbine control cabinet to update shaft vibration, axial displacement, and eccentricity protection parameters using configuration software during turnarounds.
Hydroelectric Power Generation
Connects to the 3500/20 or 3500/22M modules of high-capacity hydro-generator units to export configuration snapshots for shaft thrust and low-frequency radial runout parameters.
Nuclear Power Generation
Executes channel alignment and system event list data retrieval on machinery protection racks assigned to main feed pumps and high-capacity circulating water loops on the conventional island.
Wind Power Generation
Deployed inside onshore or offshore wind farm substation buildings for point-to-point system configuration and network debugging of main transformer cooling fans or gearbox condition monitoring cabinets.
During operation, it must strictly run within the industrial temperature range of -30°C to +65°C. Route the cable away from power lines and high-power VFDs to prevent electromagnetic interference, and avoid excessive pulling or bending during plugging to ensure stable 50-foot RS232 signal transmission and preserve its explosion-proof jacket.
Alternative Names
130118 0050 02
130118-0050-01
130118-0050-O2
130118-005O-02
130118-0O50-02
130118-O050-02
1301I8-0050-02
130I18-0050-02
13O118-0050-02
I30118-0050-02
Technical notes
The 130118-0050-02 establishes a physical serial connection between a host computer and a 3500 Rack Interface Module or a Transient Data Interface module to facilitate data transmission, real-time instrumentation monitoring, and configuration tasks within the 3500 system software.
FAQ View All FAQ
-
What is 130118-0050-02?130118-0050-02 is Host Computer to 3500 Rack Cable.
-
What is the primary function of the 130118-0050-02?It establishes a physical connection between a host computer and the 3500 rack for system configuration and real-time data collection.
-
What communication interface does the 130118-0050-02 use?It utilizes a standard RS232 serial interface.
-
Do you offer global delivery services?Yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
-
How many parts do you have in stock?We have an extensive stock base consisting of ten thousands of new and discontinued automation parts including those from leading manufacturers such as:Control Systems (DCS, PLC, CNC) ,Panel Controllers,HMI and Display Panels,Drives,Encoders and Resolvers,Power Supplies. If you are unable to find what you are looking for then don’t panic.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.