Bently Nevada 330903-00-11-10-01-CN is an evidence-bounded requested 3300 XL NSv metric probe configuration. The 330903 probe family and fields 00-11-10-01 are supported by the current datasheet, but final suffix CN is not an agency-approval code published in that ordering table.
- Exact requested identity: 330903-00-11-10-01-CN
- Product class: requested 3300 XL NSv metric probe configuration
- Probe family: 330903, M8x1 without armor
- Unthreaded length: 0 mm
System role: It is a requested M8x1, no-armor NSv probe configuration whose final market/order suffix requires nameplate or Baker Hughes order-record confirmation. Only facts stated by the cited Baker Hughes / Bently Nevada material are published; sibling, successor and third-party data are not transferred. Architecture boundary: Use only after confirming the complete label, matching NSv extension cable and Proximitor sensor system length. Do not treat CN as equivalent to official approval options 00 or 05 and do not copy data from neighboring 330903 configurations. Before installation or replacement, verify the complete physical label, host equipment, companion hardware, wiring and approved commissioning procedure. Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Important Notice: Verify the complete Bently Nevada 330903-00-11-10-01-CN physical label and installed-system documentation before use.
Apter Power 330903-00-11-10-01-CN Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited manufacturer official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current manufacturer documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for Bently Nevada 330903-00-11-10-01-CN.
System documentationProvides a source-traceable boundary for the documented 3300 XL NSv proximity transducer system configuration.
Commissioning reviewGuides identity, companion-hardware, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact Baker Hughes / Bently Nevada documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete Bently Nevada 330903-00-11-10-01-CN label, revision and installed-system documentation before use.
2Do not treat CN as equivalent to official approval options 00 or 05 and do not copy data from neighboring 330903 configurations.
3De-energize the equipment and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up controller, drive, network and configuration data before replacement, migration or firmware work.
5Verify every companion module, cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented functional test and confirm diagnostics, alarms and fail-state behavior after work.
8Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Videos
News
Applications
