The 330101-08-24-10-02-00 is a Bently Nevada 3300 XL 8 mm non-contacting eddy-current proximity probe with 3/8-24 UNF mounting threads, none, 0.8 in unthreaded length, a 2.4 in overall case, a 1.0 m (3.3 ft) standard lead, and a ClickLoc connector without a protector. The final 00 code selects no agency approval option.
- 3/8-24 UNF
- None
- 0.8 in
- 2.4 in
In a correctly matched 3300 XL 8 mm transducer system, the probe detects distance to a conductive shaft and the Proximitor Sensor converts that gap into a voltage used for shaft vibration, position, phase-reference, and speed measurements on rotating machinery. For dependable operation, follow the official system-matching, mounting, wiring, environmental, and approval instructions.
Important Notice: Match the probe and extension cable to the Proximitor Sensor system length. Verify 3/8-24 UNF engagement, final gap, target geometry, and the physical ordering code before commissioning.
Apter Power 330101-08-24-10-02-00 Manuals and Guides
Important Notice: These are two separate Apter Power documents prepared from the official Bently Nevada source named in each document. Confirm the physical nameplate, current manufacturer documentation, and applicable installation drawing before installation or replacement.
Fluid-Film-Bearing Machinery
Provides non-contacting shaft vibration and position measurement at 3/8-24 UNF unarmored installations.
Radial Shaft Vibration
Measures dynamic shaft motion relative to the probe mounting location.
Static Shaft Position
Measures probe-to-target distance through the complete transducer-system output.
Axial or Thrust Position
Supports axial displacement measurement when the target and mechanical geometry meet the manufacturer limits.
Keyphasor Reference
Generates phase-reference information with the correct target notch or projection and monitoring input.
Speed Measurement
Supports rotational-speed measurement when the system, target geometry, and monitoring channel are correctly matched.
Read and follow the official manufacturer source and applicable installation instructions before use. Verify the exact complete ordering code from the physical nameplate.
1
Use a 4.0 m 330130 extension cable with a 5.0 m Proximitor Sensor, or an 8.0 m extension cable with a 9.0 m Proximitor Sensor.
2
Verify the 3/8-24 UNF mounting hole, side-view clearance, insertion depth, and case-thread engagement before installation.
3
Maintain the published 25.4 mm minimum cable bend radius and protect the lead from crushing, sharp edges, and oil paths.
4
Gap the complete matched system against the intended target material; do not set the final gap from mechanical distance alone.
5
Do not infer hazardous-area approval from the family name; final code 00 does not request an approval option.
Videos
News
Applications
