Speak to a sourcing specialist
sales13@apterpower.com

109548-01 P1407030-00100

Proximity Probe
In Stock
Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe:

Bently Nevada 109548-01 P1407030-00100 is a proximity probe supplied under a two-part identification. Match both markings to the installed transducer chain and machine drawing before replacement.
  • Manufacturer part number
    109548-01 P1407030-00100
  • Shipping
    Swift global dispatch
  • Condition
    New, original product
  • Shipping size (est.)
    1.4cm x 1.1cm x 111cm
  • Country of Origin
    USA
Get a quick price for 109548-01 P1407030-00100
E-mail *
Mobile
Company
Content *
Quantity *
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

  • 0

    Review your reference

    Send the complete 109548-01 P1407030-00100 marking and clear photos of the both identity markings, tip and connector.

  • 1

    Confirm the offer

    Compare the offered 109548-01 P1407030-00100 identity, condition and included items with the installed equipment record and quotation.

  • 2

    Arrange dispatch

    Confirm the required quantity and destination, then obtain the current dispatch arrangement in writing.

  • Match the complete marking

    Include 109548-01 P1407030-00100 and every suffix or approval code visible on the item. Keep the complete reference on your enquiry and quotation.

  • Check the offered item before ordering

    Request clear photos of the label and connector for 109548-01 P1407030-00100. Have your maintenance team compare the offered reference with the installed equipment and applicable Bently Nevada documentation.

Technical specifications for 109548-01 P1407030-00100

  • Manufacturer:
    Bently Nevada
  • Product Category:
    Machinery Monitoring Systems
  • Spare Part Number:
    P1407030-00100
  • Weight:
    0.14 kg
  • Tariff Code:
    8537101190
  • Sensing method:
    Non-contact eddy-current proximity sensing
  • Probe series:
    3300 XL NSv
  • Probe tip material:
    Polyphenylene sulfide (PPS)
  • Probe case material:
    AISI 304 stainless steel
  • Probe lead:
    75 Ω FEP-insulated coaxial cable
  • Matched system:
    NSv probe + NSv extension cable + 3300 XL NSv Proximitor Sensor
  • System length options:
    5 m or 7 m including extension cable
  • Nominal system scale:
    7.87 V/mm (200 mV/mil)
  • System linear range:
    1.5 mm nominal; approximately 0.25–1.75 mm gap
  • Recommended system gap:
    1.0 mm (40 mils)
  • Calibration target:
    Bently Nevada AISI 4140 steel; ≥31 mm in reference test
  • Flat target diameter:
    8.9 mm minimum; 13 mm recommended minimum
  • Counterbore diameter:
    9.5 mm minimum; 13 mm recommended minimum
  • Adjacent probe-tip spacing:
    ≥25 mm axial; ≥23 mm radial
  • Minimum lead bend radius:
    25.4 mm with or without stainless-steel armor
  • Probe operating temperature:
    −52 to +177 °C (NSv family)
  • ClickLoc connector torque:
    Finger tight; 0.56 N·m maximum
  • Monitor field wiring:
    Shielded 3-conductor triad; up to 305 m from Proximitor to monitor

Information

Overview Downloads Applications / Compatibility Product Precautions
  • 109548-01 P1407030-00100 must be identified by its complete marking before the sensing path is commissioned.
Product type: Proximity Probe
Identification: 109548-01 P1407030-00100
Integration: match the installed sensing-chain assembly
109548-01 P1407030-00100 is supplied under a two-part marking that should remain together in maintenance and purchasing records. Confirm the complete identity on the offered unit before substituting it into an installed monitoring channel.

A proximity probe senses a conductive target without contact, while connected extension and signal conditioning determine the usable channel response. The actual associated hardware must be matched by part number and installation drawing rather than inferred from the probe appearance.

Before return to service, photograph the connector and tip, check the mechanical fit and verify the resulting channel indication against the recorded baseline. Preserve the installed component list for subsequent fault isolation.
Controller platform reference: Bently Nevada proximity measurement. Confirm the installed arrangement for 109548-01 P1407030-00100.
Technical documentation for Bently Nevada 109548-01 P1407030-00100: verified manufacturer reference or model-specific technical reference, plus an Apter Power engineering guide.
Use the complete supplied marking and the installed equipment drawing when applying these technical documents.
Verify the complete 109548-01 P1407030-00100 marking and the physical transducer chain before fitting this spare.
Compare both markings

Keep the two-part identity together in the replacement record.

Inspect the sensing tip

Check for impact damage and contamination.

Check connector fit

Compare the actual connector and lead to the removed unit.

Confirm machine clearance

Use the installed drawing to set reach and target spacing.

Verify channel pairing

Read the connected extension and conditioner labels before energizing.

Record acceptance

Capture the final gap and channel baseline.

Alternative Names

Bently Nevada 109548-01 P1407030-00100 Proximity Probe

Technical notes

Identification: Preserve both 109548-01 P1407030-00100 markings when checking the offered unit against the installed spare.

Connection check: Confirm the physical connector, cable construction and monitoring-chain part numbers before replacement.

FAQ View All FAQ

  • Why might 109548-01 P1407030-00100 give a different reading after a probe-only exchange?
    The installed extension length, Proximitor calibration, target alloy and gap all influence the complete channel response. Record all three component markings and compare the as-left output with the baseline before accepting replacement.
  • How should 109548-01 P1407030-00100 be validated on a target other than the reference steel?
    A different alloy or coating can shift scale and linearity. Use the installed target-specific calibration procedure and verify the channel at more than one gap; published reference performance does not transfer automatically.
  • How can a tight counterbore affect 109548-01 P1407030-00100?
    Nearby metal can influence an eddy-current measurement. Check counterbore and side-clearance geometry against the NSv installation requirements, then verify the actual gap and output in the installed channel.
  • How can cross-talk be isolated when 109548-01 P1407030-00100 sits beside another probe?
    Compare the as-built tip spacing with NSv arrangement guidance, then assess each channel separately and together under the approved test procedure. A change when the adjacent channel is energized calls for mounting review.
  • What should be inspected if the 109548-01 P1407030-00100 connection is exposed to liquid?
    Inspect the ClickLoc connector and protector, clean and dry the joint under the site procedure, then check the complete channel baseline. The connector protection depends on the correct mating arrangement.
  • Why is the NSv Proximitor supply range not a direct rating for 109548-01 P1407030-00100?
    The published -17.5 to -26 Vdc requirement belongs to the Proximitor Sensor within the matched system. Do not connect that supply directly to the probe or treat it as a standalone probe rating.
  • What lead-routing checks matter when installing 109548-01 P1407030-00100?
    Confirm the fitted cable and armor form, maintain the NSv minimum bend radius, protect the coax from sharp edges and strain, then compare the complete channel indication with the before-service baseline.
  • Can 109548-01 P1407030-00100 alone replace an older 3000 or 7000 series channel?
    No direct one-part interchange is established by the probe marking. An NSv upgrade requires matching the probe, extension and Proximitor Sensor to the approved channel design and target before commissioning.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
  • Whatsapp: +86 18030235313

    Send us a message.
  • sales13@apterpower.com

    Complete our online form.
  • +86 18030235313

    Speak to our team in your native language.