Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330173-00-05-10-02-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330173-00-05-10-02-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330173-00-05-10-02-00
-
Estimated shipping dimensions:1.3×1.1×120cm
-
Weight:0.04 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe family:3300 5 mm
-
Mounting thread:M8 x 1
-
Armor:Without armor
-
Unthreaded length:0 mm
-
Overall case length:50 mm
-
Total length:1.0 m
-
Connector:ClickLoc, no connector protector
-
Approval option:Not required
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330173-00-05-10-02-00 brings the compact 5 mm sensing tip to a metric M8 x 1 mounting point with a one-metre lead.
- Uses the compact 5 mm probe tip for restricted sensing locations.
- Provides a fully threaded 50 mm M8 x 1 case.
- Carries a 1.0 m standard lead without armor.
- Terminates in the code-02 ClickLoc connector without a protector.
The 5 mm probe interfaces with the documented matched transducer system and must not be mixed with unrelated probe families. Mounting clearance and target size require particular attention because of the smaller tip.
Important Notice: Match the complete 330173-00-05-10-02-00 marking before removing the installed probe. Verify proportional voltage response, polarity and channel indication before returning the machine to service.
Bently Nevada 330173-00-05-10-02-00 Manuals & Downloads
Bently Nevada 330173-00-05-10-02-00 Official Technical Reference Excerpt (PDF)Bently Nevada 330173-00-05-10-02-00 Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Shaft-relative vibration
Uses the installed probe position to observe dynamic shaft motion in restricted-clearance shaft locations.
Static position
Supports non-contact measurement of shaft position inside the calibrated transducer-system range.
Machine protection input
Feeds the matched Proximitor sensor and monitoring channel used for alarms and protection logic.
Commissioning verification
Allows gap, signal response and channel direction to be checked after installation.
Before installing Bently Nevada 330173-00-05-10-02-00, confirm the documented system, interfaces and controlled configuration.
1
Match the complete 330173-00-05-10-02-00 marking before removing the installed probe.
2
Confirm the mounting interface is M8 x 1 and that the case provides adequate thread engagement.
3
Keep the probe, extension cable and Proximitor sensor at the documented matched 3300 5 mm system electrical length.
4
Protect the probe tip, coaxial lead and ClickLoc connector from impact, contamination and sharp bends.
5
Route the lead away from hot surfaces, rotating parts and locations that can crush or abrade the cable.
6
Use the connector protector only when it is included in the complete ordering code.
7
Set the probe gap with the matched system and the controlled target material before enabling protection.
8
Verify proportional voltage response, polarity and channel indication before returning the machine to service.
Technical notes
Match the complete 330173-00-05-10-02-00 marking before removing the installed probe. Verify proportional voltage response, polarity and channel indication before returning the machine to service.
FAQ View All FAQ
-
What mounting thread is machined on 330173-00-05-10-02-00?The 330173 metric probe uses M8 x 1.
-
How much unthreaded case length does 330173-00-05-10-02-00 have?Code 00 specifies 0 mm; the 50 mm case is fully threaded.
-
Which case length is encoded by 05 in 330173-00-05-10-02-00?For the metric 330173 ordering string, 05 specifies 50 mm.
-
What is the total probe length of 330173-00-05-10-02-00?Code 10 specifies 1.0 m.
-
Does the connector on 330173-00-05-10-02-00 have a protector?No. Option 02 selects the ClickLoc connector without protector.
-
Why must target size be checked for 330173-00-05-10-02-00?The compact 5 mm tip requires the documented target geometry to preserve calibrated response.
-
Which extension-cable family is used with 330173-00-05-10-02-00?Use the extension arrangement documented for the matched 3300 5 mm system and confirm total electrical length.
-
What should be verified after gapping 330173-00-05-10-02-00?Confirm stable bias voltage, correct response direction and the expected dynamic signal at the monitor.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.