Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330101-XX-XX-10-02-CN
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330101-XX-XX-10-02-CN
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330101-XX-XX-10-02-CN
-
Estimated shipping dimensions:17.5x17.5x1.3cm
-
Weight:0.08 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Transducer family:3300 XL 8 mm
-
Measurement principle:Non-contact eddy current
-
Mounting thread:3/8-24 UNF
-
Integral lead length:1.0 m
-
Lead construction:Flexible insulated coaxial lead
-
Termination:miniature ClickLoc coaxial connector with standard cable
-
System rule:Probe, extension cable and Proximitor electrical length must match
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330101-XX-XX-10-02-CN brings the 3300 XL 8 mm sensing tip to the machine measurement point through a 3/8-24 UNF threaded case and 1.0 m integral lead.
- Uses a 3/8-24 UNF threaded probe case for the specified mounting interface.
- Provides a unarmored lead with a total length of 1.0 m.
- Terminates through miniature clickloc coaxial connector with standard cable.
- Forms part of a matched 3300 XL 8 mm probe, extension-cable and Proximitor sensor chain.
The proximity probe must remain within its defined transducer or monitoring-system boundary. Confirm the mating hardware, controlled configuration and final signal response before restoring protection.
Important Notice: Verify the complete 330101-XX-XX-10-02-CN marking, mating interface and controlled channel configuration before installation.
Bently Nevada 330101-XX-XX-10-02-CN Manuals & Downloads
Bently Nevada 330101-XX-XX-10-02-CN Technical Reference (PDF)Bently Nevada 330101-XX-XX-10-02-CN Installation & Commissioning Guide (PDF)
The Technical Reference contains selected manufacturer pages for the documented product family, or a dedicated technical reference when a clean source file is unavailable. The installation guide covers identification, installation checks, functional verification and the acceptance record.
Radial vibration
Measure relative shaft motion at an approved metallic target.
Axial position
Track shaft-position change where the mechanical range and mounting are qualified.
Reference timing
Provide a shaft-event signal when the installed target and monitor support the application.
Condition monitoring
Deliver dynamic displacement and static gap information to compatible electronics.
Before installing Bently Nevada 330101-XX-XX-10-02-CN, verify the complete nameplate identity, the mating interface and the controlled system configuration.
1
Confirm the complete 330101-XX-XX-10-02-CN marking before removing the installed probe.
2
Verify the 3/8-24 UNF mounting thread and confirm adequate mechanical clearance for the installed probe case.
3
Match probe and extension-cable length to the installed Proximitor electrical length.
4
Keep the coaxial joint clean, dry and free from side load.
5
Do not shorten, splice or twist the calibrated probe lead.
6
Maintain the required target material, diameter and side-view clearance.
7
Set the working gap from the matched system response and machine procedure.
8
Record gap voltage, channel OK state and dynamic response before release.
Technical notes
Verify the complete 330101-XX-XX-10-02-CN marking, mating interface and controlled channel configuration before installation.
FAQ View All FAQ
-
Which sensing family includes Bently Nevada 330101-XX-XX-10-02-CN?It belongs to the 3300 XL 8 mm proximity-transducer family.
-
What mounting thread is specified for Bently Nevada 330101-XX-XX-10-02-CN?The probe uses a 3/8-24 UNF mounting thread.
-
How long is the integral lead on Bently Nevada 330101-XX-XX-10-02-CN?The selected lead length is 1.0 m.
-
What cable construction is used by Bently Nevada 330101-XX-XX-10-02-CN?This execution is unarmored.
-
Which connector option is fitted to Bently Nevada 330101-XX-XX-10-02-CN?It uses miniature clickloc coaxial connector with standard cable.
-
How should Bently Nevada 330101-XX-XX-10-02-CN be matched to the signal conditioner?The probe and extension cable must equal the Proximitor system length.
-
What must be checked before setting the gap for Bently Nevada 330101-XX-XX-10-02-CN?Confirm the target material, geometry, mounting clearance and complete matched chain.
-
Which checks complete commissioning of Bently Nevada 330101-XX-XX-10-02-CN?Verify stable gap voltage, channel OK state, dynamic response and the approved alarm path.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.