What is the 330101-08-20-10-02-05?

The 330101-08-20-10-02-05 is a 3300 XL series 8 mm Eddy Current Proximity Probe manufactured by Bently Nevada. It is a non-contacting sensor used to measure shaft vibration, displacement, and keyphasor on large rotating machinery.

How to use products like the 330101-08-20-10-02-05?

To use it, it needs to be threaded into the machine's bearing housing or a dedicated probe bracket. The probe tip must face the metal surface of the rotating shaft and maintain a specific initial installation gap. It cannot work alone and must be connected to a 3300 XL Proximitor via an extension cable.

What is the primary function of the 330101-08-20-10-02-05 in the system?

Its primary function is serving as the "sensor" for the monitoring system, converting minute dynamic or static displacements on the shaft surface into electrical signals without contact via the eddy current principle, enabling real-time monitoring of bearing vibration and axial shift.

How to determine if the 330101-08-20-10-02-05 is damaged?

After disconnecting the extension cable, measure the resistance between the center pin and the outer shell of the probe's ClickLoc connector using a multimeter. The normal coil resistance for 3300 XL series probes is typically between 5.0 and 12.0 ohms; infinity or near zero indicates damage.

What should be paid attention to in the daily maintenance of the 330101-08-20-10-02-05?

The maintenance focus is on keeping the ClickLoc connector clean and never letting oil or dust contaminate its interior, which affects measurement accuracy; additionally, sharp bends in the cable must be avoided, keeping the bend radius above 25.4 mm.

330101-08-20-10-02-05

Name: 330101-08-20-10-02-05
Brand: Bently Nevada
SKU: 330101-08-20-10-02-05

3300 XL 8 mm Proximity Probes

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

3300 XL 8 mm Proximity Probes

3300 XL 8 mm Probe, 3/8-24

UNF thread, without armor

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Warranty Policy

Review the applicable warranty coverage and claim process.
Return Notice

Check the return process and obtain approval before sending an item back.
Shipping Method

Review shipping arrangements, transit estimates and delivery responsibilities.
Parts Availability

Browse stock listings and confirm current availability with our team.
How to order

See how to submit an enquiry, review a quotation and confirm an order.

Get a quick price for 330101-08-20-10-02-05

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for 330101-08-20-10-02-05

Manufacturer:

Bently Nevada
Product Category:

Machinery Monitoring Systems
Spare Part Number:

330101-08-20-10-02-05
Estimated shipping dimensions:

1.5x1.3x116cm
Weight:

0.05 kg
Tariff Code:

8537101190
Counliy of origin:

USA
Unthreaded Length Option:

0.8in.
Overall Case Length Option:

2.0 in.
Total Length Option:

1.0 meter (3.3 feet)
Connector and Cable-Type Option:

Miniature coaxial ClickLoc connector, standard cable
Agency Approval Option:

CSA, ATEX, IECEx Approvals

Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

The 330101-08-20-10-02-05 is a Bently Nevada 3300 XL series 8mm eddy current probe (forward mounting). This model is one of the most commonly used vibration sensors in industrial settings, and its configuration parameters make it ideal for applications requiring installation through thick housings and in explosion-proof environments.

One 3300 XL 8 mm probe
One 3300 XL extension cable
One 3300 XL Proximitor Sensor

The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.

Bently Nevada 330101-08-20-10-02-05 3300 XL 8 mm Proximity Probes Manuals, Datasheets, Drivers, Link

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.

Oil & Gas Industry

Utilizing its explosion-proof certification, it monitors the radial vibration of high-speed rotors to prevent combustible gas leaks or equipment destruction caused by bearing failure.

Thermal Power Generation

Used for steam turbine main shaft monitoring. It measures axial displacement (thrust) of the rotor to prevent friction between blades and the casing during operation.

Petrochemical Industry

Used in reciprocating compressors to measure Rod Drop. By monitoring changes in the piston rod's position, it evaluates the wear condition of internal rider bands.

Metallurgy Industry

Used for large blast furnace blowers. In high-dust and high-vibration environments, it monitors the dynamic oil film thickness of bearings to prevent "bearing burnout" caused by excessive loads.

Mining & Mineral Processing

Installed in the gearboxes of large ball mills or crushers. It monitors high-speed vibration of the input shaft to detect poor gear meshing or early bearing pitting at an early stage.

When using the 330101-08-20-10-02-05 probe, it must be used in conjunction with an intrinsically safe safety gate in an explosion-hazardous area. Utilizing its 0.8-inch threadless section, it should safely pass through the housing bracket. During installation, the output must be monitored with a multimeter, and the initial gap must be precisely locked at approximately -10V at the linear midpoint. It is strictly forbidden to cut the 1.0-meter of the built-in cable to maintain system impedance matching. Simultaneously, avoid collisions between the probe head and the axial surface, and ensure proper insulation and moisture-proof sealing of the coaxial connector to guarantee signal stability under harsh operating conditions.

FAQ View All FAQ

What is the 330101-08-20-10-02-05?

The 330101-08-20-10-02-05 is a 3300 XL series 8 mm Eddy Current Proximity Probe manufactured by Bently Nevada. It is a non-contacting sensor used to measure shaft vibration, displacement, and keyphasor on large rotating machinery.
How to use products like the 330101-08-20-10-02-05?

To use it, it needs to be threaded into the machine's bearing housing or a dedicated probe bracket. The probe tip must face the metal surface of the rotating shaft and maintain a specific initial installation gap. It cannot work alone and must be connected to a 3300 XL Proximitor via an extension cable.
What is the primary function of the 330101-08-20-10-02-05 in the system?

Its primary function is serving as the "sensor" for the monitoring system, converting minute dynamic or static displacements on the shaft surface into electrical signals without contact via the eddy current principle, enabling real-time monitoring of bearing vibration and axial shift.

How to determine if the 330101-08-20-10-02-05 is damaged?

After disconnecting the extension cable, measure the resistance between the center pin and the outer shell of the probe's ClickLoc connector using a multimeter. The normal coil resistance for 3300 XL series probes is typically between 5.0 and 12.0 ohms; infinity or near zero indicates damage.
What should be paid attention to in the daily maintenance of the 330101-08-20-10-02-05?

The maintenance focus is on keeping the ClickLoc connector clean and never letting oil or dust contaminate its interior, which affects measurement accuracy; additionally, sharp bends in the cable must be avoided, keeping the bend radius above 25.4 mm.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.