Which installed system position is intended for 2300/25-00?

Install 2300/25-00 only in the documented 2300 Series machinery monitor position and compare the complete catalog marking with the approved hardware list.

What field signals or controlled function does 2300/25-00 handle?

Its documented role is two vibration inputs, one speed input, relays and spa/ethernet communications; preserve the assigned channel, network or controller function during service.

Which companion hardware must be matched to 2300/25-00?

Match 2300/25-00 with compatible proximity or seismic transducers and speed or Keyphasor input, including the documented rack, cable and project identity.

Which electrical rating must be checked before wiring 2300/25-00?

Verify approval option: No agency approval option. Do not transfer limits from another catalog number.

What configuration should be recorded before replacing 2300/25-00?

Record the as-found position, conductors, addressing, firmware and software revision, then restore only the approved 2300 Series machinery monitor configuration.

Which isolation and handling controls apply to 2300/25-00?

Isolate all documented supply and field energy, use ESD controls and protect keyed connectors before handling 2300/25-00.

How should an engineer commission 2300/25-00?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended pump and fan protection function.

Can 2300/25-00 replace a visually similar module without an engineering review?

No automatic substitution is assumed; compare the complete catalog number, interfaces, ratings and approved system revision.

2300/25-00 | Bently Nevada | 2300/25 vibration monitor with Trendmaster SPA interfac

Name: 2300/25-00
Brand: Bently Nevada
SKU: 2300/25-00

2300/25-00

2300/25 vibration monitor with Trendmaster SPA interface

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 2300/25-00

Manufacturer:

Bently Nevada

Product Category:

Machinery Monitoring System

Spare Part Number:

2300/25-00

Estimated shipping dimensions:

14.8x15.2x6.8cm

Weight:

0.95 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Approval option:

No agency approval option

Measurement channels:

Speed channel:

Power input:

18 to 36 V DC, 7.5 W maximum

Input range:

-0.25 to -22 V

Input ADC:

Independent 24-bit converters

Band-pass filter:

0.2 Hz to 20 kHz configurable

Measurement accuracy:

+/-1% of full scale

Proximity scale factor:

5 to 1000 mV/mil

Proximity full scale:

0 to 160 mil peak-to-peak

RPM range:

1 to 120,000

Buffered outputs:

3 BNC outputs

Relay outputs:

2 SPDT dry contacts

Network:

Modbus over Ethernet

2300/25 interface:

Trendmaster SPA

Information

Overview Manuals Common Applications Product Precautions

Bently Nevada 2300/25-00 is 2300/25 vibration monitor with trendmaster spa interface. It monitors two vibration channels plus speed and publishes measurements through Trendmaster SPA and Ethernet communications.

Samples two vibration channels synchronously
Accepts proximity, velocity or acceleration inputs
Provides a dedicated speed channel
Connects to installed Trendmaster SPA infrastructure

2300/25-00 operates with compatible proximity or seismic transducers, speed or Keyphasor input, two programmable relay circuits, System 1 and Trendmaster SPA infrastructure.

Engineered applications include Pump and fan protection, Compressor condition monitoring, Trendmaster SPA modernization, 2300 monitor renewal.

Important Notice: Verify 2300/25-00, transducer type and scale factor, channel band-pass settings, speed input, relay logic, SPA address and Ethernet configuration; prove alert, danger, buffered output and network data before service.

Apter Power Bently Nevada 2300/25-00 Manuals and Guides

Apter Power Bently Nevada 2300/25-00 Product Technical Reference PDF Apter Power Bently Nevada 2300/25-00 Installation and Verification Workbook PDF

The first document presents model-specific technical and system data. The second provides a separate installation, connection, commissioning and acceptance workflow.

Pump and fan protection

Provides continuous vibration alarming for medium- and low-criticality machines.

Compressor condition monitoring

Combines vibration and speed for diagnostic assessment.

Trendmaster SPA modernization

Extends an installed SPA network into current monitoring software.

2300 monitor renewal

Restores monitor service while preserving channel types and setpoints.

Read the applicable Bently Nevada instructions before work. Verify 2300/25-00 and the installed 2300 Series machinery monitor configuration.

Verify the complete 2300/25-00 marking and its assigned 2300 Series machinery monitor position before work.

Place the connected pump and fan protection process in the approved maintenance state.

Isolate applicable power and two vibration inputs, one speed input, relays and spa/ethernet communications field energy before disconnecting conductors.

Record connector, conductor, address, firmware and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed compatible proximity or seismic transducers and speed or Keyphasor input against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended compressor condition monitoring function and retain the final test result.

FAQS

Which installed system position is intended for 2300/25-00?

Install 2300/25-00 only in the documented 2300 Series machinery monitor position and compare the complete catalog marking with the approved hardware list.
What field signals or controlled function does 2300/25-00 handle?

Its documented role is two vibration inputs, one speed input, relays and spa/ethernet communications; preserve the assigned channel, network or controller function during service.
Which companion hardware must be matched to 2300/25-00?

Match 2300/25-00 with compatible proximity or seismic transducers and speed or Keyphasor input, including the documented rack, cable and project identity.
Which electrical rating must be checked before wiring 2300/25-00?

Verify approval option: No agency approval option. Do not transfer limits from another catalog number.
What configuration should be recorded before replacing 2300/25-00?

Record the as-found position, conductors, addressing, firmware and software revision, then restore only the approved 2300 Series machinery monitor configuration.
Which isolation and handling controls apply to 2300/25-00?

Isolate all documented supply and field energy, use ESD controls and protect keyed connectors before handling 2300/25-00.
How should an engineer commission 2300/25-00?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended pump and fan protection function.
Can 2300/25-00 replace a visually similar module without an engineering review?

No automatic substitution is assumed; compare the complete catalog number, interfaces, ratings and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

2300/25-00

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 2300/25-00

Technical specifications for 2300/25-00

Information

Information