-
Match the complete marking
Include 1756-IF6I and every revision or approval marking visible on the item. Keep the exact reference on your enquiry and quotation. -
Check the offered item before ordering
Request available label and interface photos. Have your maintenance team compare the offered 1756-IF6I reference with the installed equipment and applicable Allen-Bradley documentation.
Technical specifications for 1756-IF6I
-
Manufacturer:Allen-Bradley
-
Product Category:PLC Systems
-
Spare Part Number:1756-IF6I
-
Weight:0.28 kg
-
Tariff Code:8537101190
-
Analog inputs:6 individually isolated
-
Input ranges:+/-10.5 V; 0 to 10.5 V; 0 to 5.25 V; 0 to 21 mA
-
Resolution:16 bit
-
Voltage resolution:343, 171 or 86 microV/bit by range
-
Current resolution:0.34 microA/bit
-
Input impedance:>10 Mohm voltage; 249 ohm current
-
Isolation voltage:250 V continuous; tested at 1,350 V AC for 2 s
-
Backplane current:250 mA at 5.1 V; 100 mA at 24 V
-
Backplane power:3.7 W
-
Maximum power dissipation:3.7 W voltage; 4.3 W current
-
Channel bandwidth:15 Hz at -3 dB
-
Settling time:<80 ms to 5% of full scale
-
Calibrated accuracy:Better than 0.1% of range at 25 deg C
-
Calibration interval:6 months
-
Minimum scan time:10 ms integer; 25 ms floating point
-
Normal-mode rejection:60 dB at 60 Hz
-
Common-mode rejection:120 dB at 60 Hz; 100 dB at 50 Hz
-
Overvoltage protection:120 V AC/DC voltage input; 8 V AC/DC current input
Information
- The complete 1756-IF6I identity establishes the hardware selection; installation still depends on the documented host, companion components and project configuration.
Range-specific resolution: Acceptance limits must follow the configured voltage or current range.
Data-format control: Integer and floating-point modes have different scan and scaling behavior.
The 20-pin removable terminal block, field transmitter supply and shield/reference design remain part of the measurement loop. Verify loop resistance and current-input protection before reconnecting a live transmitter.
Commissioning should inject traceable low, mid and high values on every used channel, confirm raw and engineering-unit values, and review channel alarms and open-circuit behavior in the controller tags.
-
Allen-Bradley 1756-IF6I technical reference
Apter Power reference with verified manufacturer data and exact-model applicability. -
Allen-Bradley 1756-IF6I engineering guide
Apter Power installation, configuration, diagnostic and acceptance guidance.
Platform applications: The uses below depend on the installed controller configuration and approved system design.
-
Isolated process measurement
Acquire six independently isolated voltage or current loops. -
Mixed-range analog monitoring
Configure each channel for the required supported signal range. -
High common-mode installations
Separate channel references within the documented isolation limits. -
ControlLogix retrofit
Replace an exact 1756-IF6I while preserving RTB wiring and project configuration.
Match every field of 1756-IF6I with the approved spare-parts record before installation.
Use grounded handling, antistatic packaging and protected work surfaces for exposed electronics.
Confirm connector keying, slot assignment, supply and companion hardware before energizing.
Record switches, firmware, parameters, terminal assignments and as-found diagnostics before removal.
Check contamination, corrosion, ventilation, vibration and cabinet temperature before fitting the replacement.
Complete the manufacturer and site acceptance procedure, then retain the as-left result with the maintenance record.
Alternative Names
Technical notes
Channel relationship: Each of the six inputs is individually isolated and can be configured for the documented voltage or 0 to 21 mA range; preserve the exact RTB terminal assignment.
Sampling and calibration: Integer sampling can be set from 10 ms and floating-point sampling from 25 ms; review filter, alarms, calibration date and engineering-unit scaling before release.
Technical reference: Rockwell Automation 1756-IF6I product record and publication 1756-TD002.
FAQ View All FAQ
-
How should each configured range on 1756-IF6I be documented before replacement?Export the Logix module properties and record range, filter, real-time sampling, scaling, alarms and data format for all six channels.
-
What causes a current input on 1756-IF6I to read incorrectly while voltage channels remain normal?Check the 249-ohm current path, loop supply, terminal selection, range configuration and transmitter compliance voltage.
-
How should isolation on 1756-IF6I be treated during field testing?Use test equipment and wiring that preserve channel-to-channel isolation; do not create an unintended common through shields or calibrator references.
-
What acceptance test is appropriate for 1756-IF6I after installation?Inject traceable low, mid and high values on every used range and compare module tags, engineering scaling, alarms and historian values.
-
What evidence should be recorded before replacing 1756-IF6I?Capture the complete nameplate, installed slot or mounting position, companion hardware, wiring identifiers and the accepted operating baseline for the controllogix six-channel isolated analog input module.
-
How should an intermittent fault around 1756-IF6I be isolated?Separate field wiring, connector, supply, grounding, configuration and host-system causes. Reproduce the symptom under a controlled test and change only one variable at a time.
-
What configuration evidence should be retained after commissioning 1756-IF6I?Retain the hardware identity, firmware or parameter record where applicable, channel assignment, as-left measurements, alarm or diagnostic state and the approved functional-test result.
-
When should 1756-IF6I be rejected during incoming inspection?Quarantine the item if the complete marking, connector keying, board revision, protective coating, terminal condition or required companion hardware differs from the approved replacement record.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.











