ABB IMDSM05 is a legacy sixteen-circuit digital input/output module for 24 VDC signals in the INFI 90 and Harmony Rack installed-base evolution path. ABB documents that its circuits are selected as inputs or outputs in groups of eight.
- Product type: Selectable digital input/output module
- Circuits: 16 digital I/O circuits
- Signal class: 24 VDC
- Configuration grouping: Inputs or outputs selectable in groups of 8
The module can bring discrete field states into the controller and send discrete commands back to field-control circuits, according to the configured group roles. Exact input thresholds, output current, isolation topology, response time, function-code assignment, and diagnostics remain HOLD because an ABB-hosted exact IMDSM05 instruction was not located. ABB does not define a single universal successor for every configuration: input duty maps to SPDSI22 and output duty maps to SPDSO14. ABB also requires the dipshunt to be changed and field-wire polarity reversed for that migration, so neither successor is an alias or an automatic drop-in substitute. The module suits legacy panels that group 24 VDC status acquisition and actuation, but a mixed input/output configuration or any use with a digital logic station has no direct ABB replacement. Such sites require an engineered I/O split, termination and wiring review, configuration backup, loop checks, output fail-state tests, and controller validation before production release.
Important Notice: Do not merge IMDSM05 with NDSM05; NDSM05 is a distinct Apter record ID 773483.
Apter Power IMDSM05 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited ABB official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current ABB documents, and host-system requirements before installation or replacement.
Grouped machine status I/OAcquires 24 VDC status groups where the installed module is configured for input duty.
Grouped discrete actuationCommands 24 VDC on/off circuit groups where the installed module is configured for output duty.
Legacy mixed-I/O panelsMaintains verified legacy configurations while recognizing that mixed duty has no direct replacement.
Engineered I/O split migrationSupports planned separation to SPDSI22 inputs and SPDSO14 outputs with wiring and logic validation.
Read and follow the exact ABB documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the full IMDSM05 nameplate and revision; do not confuse it with NDSM05, IMDSM04, or SPDSM04.
2Record whether each group of eight is configured as input or output before disturbing hardware or wiring.
3Treat any mixed input/output installation as having no direct ABB replacement.
4Treat any digital logic station installation as having no direct ABB replacement.
5For migration, follow ABB's dipshunt-change and field-wire-polarity-reversal requirements; do not improvise the wiring conversion.
6Confirm the exact termination unit, cable, dipshunt, commons, polarity, fusing, and field supply from approved drawings.
7De-energize and follow site electrical-safety procedures before field-wiring work; do not assume hot removal is safe.
8Back up I/O grouping, addressing, logic, alarm/interlock mapping, and fail-state requirements before replacement.
9Loop-check every input and function-test every output after migration, then validate controller diagnostics before release.
10Keep thresholds, output current, topology, function code, lifecycle, origin, HS code, dimensions, and weight HOLD until exact ABB evidence is obtained.
Videos
News
Applications
