ABB IMMFP02 is a distinct INFI 90 / Symphony Harmony multifunction processor module used as a controller-class processing unit. ABB lists it separately from IMMFP03 and IMMFP12, so its page must preserve the exact model and revision rather than borrowing successor data.
- Product type: Multi-Function Processor Module
- Verified system family: Symphony Harmony / INFI 90 installed base
- GPI compatibility: MFP02 firmware revision G8 for ABB GPI 4.0
- GPI data-point capacity: Up to 4,000 data points for that application
Its verified role is to host control and interface applications within the installed Harmony controller architecture. ABB's General Purpose Interface can run on MFP02 revision G8 and transfer configured analog and digital data between supported foreign devices and the Symphony operator or information-system environment. For the GPI application, ABB documents up to 4,000 data points, a network of up to 50 PLCs, function-code/UDF/Batch coexistence, and interfaces to supported Allen-Bradley, Siemens, GE, Reliance, Modicon, Square-D and TI devices. These are GPI application limits, not universal IMMFP02 hardware ratings. IMMFP02 is found in legacy process-control units in power, pulp and paper, water, chemical and heavy-industry systems. Exact processor speed, memory, serial ports, I/O buses, power, dimensions and redundancy must be taken from the physical revision's ABB manual; unsupported values remain HOLD.
Important Notice: Do not copy IMMFP12 CPU, memory, serial-station or dimensions data to IMMFP02.
Apter Power IMMFP02 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited ABB official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current ABB documents, and host-system requirements before installation or replacement.
Legacy process-control executionHosts the installed controller strategy in a verified INFI 90/Harmony rack.
Foreign-device data integrationRuns ABB GPI to exchange configured analog and digital data with supported PLCs.
Operator-station data presentationMakes verified GPI data available to a common Symphony operator or information interface.
Controller evolution baselineProvides the exact legacy database and firmware baseline for engineered migration.
Read and follow the exact ABB documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Search active and warehouse records by IMMFP02, MFP02 and YIMMFP02 before creation.
2Verify the physical model, hardware revision and firmware before replacement.
3Do not copy IMMFP03 or IMMFP12 CPU, memory, ports, dimensions or power data.
4Treat GPI point and PLC limits as application-specific, not universal hardware ratings.
5Back up controller logic, function blocks, UDF/Batch code, GPI configuration and licenses.
6Confirm rack, I/O, communication, termination, addressing and redundancy from approved drawings.
7Use ABB/site ESD, isolation, outage, rollback and commissioning procedures.
8Test control outputs, peer data, GPI data, alarms and redundancy before release.
Videos
News
Applications
