Which mounting thread is supplied on TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10?

Option B1 gives this TQ403 configuration an M20 × 1.5 threaded sensor body.

How is the body geometry defined for TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10?

The ordered geometry combines a 36 mm body length under C036 with a 0 mm unthreaded length under D000.

What cable length belongs to TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10?

Option E100 specifies a 10 m integral coaxial cable with a published tolerance of ±1 m.

Which mechanical cable protection is included with TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10?

Option F1 supplies a flexible stainless-steel hose without an IP172 connector protector, and G098 specifies 9.8 m of hose.

Does TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10 require a separate extension cable for its 10 m system length?

The E100 integral cable already provides the H10 total-system length, so this ordered configuration does not need an EA403 extension cable to reach 10 m.

What operating response is documented for the matched TQ403 measurement system?

The matched TQ403 system provides a DC to 20 kHz frequency response and a 12 mm linear measurement range.

Which checks complete installation of TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10?

Installation is complete after technicians verify identity, mounting gap, target material, cable routing, connector condition, matched conditioner settings and all affected monitoring functions.

TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10

Name: TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10
Brand: Vibro-Meter
SKU: TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10

Proximity Transducer

Vibro-Meter TQ403-111-403-000-013-A1-B1-C036-D000-E100-F1-G098-H10 (1)

Vibro-Meter TQ403-111-403-000-013-A1-B1-C036-D000-E100-F1-G098-H10 (2)

Vibro-Meter TQ403-111-403-000-013-A1-B1-C036-D000-E100-F1-G098-H10 (3)

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

Vibro-Meter TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10 is a standard-environment proximity transducer with an M20 × 1.5 body and a protected integral cable. The ordered configuration forms a 10 m TQ403 measurement front end for use with the documented conditioning chain.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10

Manufacturer:

Vibro-Meter
Product Category:

General Automation
Spare Part Number:

TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10
Estimated shipping dimensions:

22x26x2cm
Weight:

0.15 kg
Tariff Code:

8537101190
Counliy of origin:

Switzerland
Product line:

Vibro-Meter TQ403 proximity measurement system
Sensor function:

Non-contact eddy-current proximity measurement
Environment option A1:

Standard environment
Body thread option B1:

M20 × 1.5
Body length option C036:

36 mm
Unthreaded length option D000:

0 mm
Integral cable option E100:

10 m ±1 m
Protection option F1:

Flexible stainless-steel hose; no IP172 connector
Flexible-hose option G098:

9.8 m
Total system length option H10:

10 m
Linear measurement range:

12 mm in the matched TQ403 system
Frequency response:

DC to 20 kHz (−3 dB)
Sensor temperature range:

−40 to +180 °C
System recommendation:

Conforms to API 670 recommendations
Connector:

Self-locking miniature coaxial cable plug

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

This exact TQ403 configuration provides the non-contact sensing element at the machine end of a Vibro-Meter eddy-current proximity measurement system.

12 mm linear measurement range in the matched system
M20 × 1.5 threaded body with 36 mm body length
10 m integral cable with 9.8 m flexible-hose protection
Self-locking miniature coaxial connector

The TQ403 sensor detects the distance to a metallic target without physical contact, while the associated IQS900 converts the front-end response for machinery monitoring. This ordered version uses a standard-environment sensor, a zero-length unthreaded section and a flexible stainless-steel hose without IP172 connector protection. Preserve the complete option string, mounting gap, target material and matched system record whenever the installed transducer is serviced or replaced.

Important Notice: Confirm the complete TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10 marking, target material and matched signal-conditioning chain before installation.

Vibro-Meter TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10 Manuals & Downloads

Vibro-Meter TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10 Technical Reference (PDF)Vibro-Meter TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10 Installation & Commissioning Guide (PDF)

The first document organizes exact-model technical evidence; the second provides a separate evidence-led installation and commissioning workflow.

Shaft relative-vibration measurement

Tracks the non-contact radial displacement of a metallic rotating shaft in the approved measurement chain.

Axial-position monitoring

Provides the sensor-side gap signal used to monitor documented shaft or rotor axial movement.

Large rotating machinery

Supports engineered turbine, compressor, alternator, pump and hydraulic-machine measurement points.

Long protected sensor routes

Uses a 10 m integral cable and flexible stainless-steel hose where the recorded installation requires protected routing.

Read the applicable Vibro-Meter instructions before work. Verify TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10 and the installed system configuration before isolation or replacement.

Record the complete TQ403 order number and every A–H option before removal.

Place the monitored machine and associated protection functions in the approved maintenance state.

Verify the M20 × 1.5 mounting thread, 36 mm body length and zero unthreaded length.

Protect the sensing tip and maintain the documented initial gap to the metallic target.

Route the 10 m integral cable and 9.8 m flexible hose without exceeding the permitted bend radii.

Keep the miniature coaxial connection clean, dry, insulated and mechanically supported.

Confirm the matched IQS900 configuration and total-system-length record before energization.

Complete gap, vibration, diagnostics and affected protection-function tests before release.

Technical notes

The 10 m total-system code is provided by the integral cable on this configuration. Installation control should cover the M20 × 1.5 mounting thread, initial probe gap, flexible-hose routing and miniature coaxial connection.

FAQ View All FAQ

What role does Vibro-Meter TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10 perform?

The complete TQ403 assembly serves as the non-contact sensing front end of a 12 mm eddy-current proximity measurement system.
Which mounting thread is supplied on TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10?

Option B1 gives this TQ403 configuration an M20 × 1.5 threaded sensor body.
How is the body geometry defined for TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10?

The ordered geometry combines a 36 mm body length under C036 with a 0 mm unthreaded length under D000.
What cable length belongs to TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10?

Option E100 specifies a 10 m integral coaxial cable with a published tolerance of ±1 m.

Which mechanical cable protection is included with TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10?

Option F1 supplies a flexible stainless-steel hose without an IP172 connector protector, and G098 specifies 9.8 m of hose.
Does TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10 require a separate extension cable for its 10 m system length?

The E100 integral cable already provides the H10 total-system length, so this ordered configuration does not need an EA403 extension cable to reach 10 m.
What operating response is documented for the matched TQ403 measurement system?

The matched TQ403 system provides a DC to 20 kHz frequency response and a 12 mm linear measurement range.
Which checks complete installation of TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10?

Installation is complete after technicians verify identity, mounting gap, target material, cable routing, connector condition, matched conditioner settings and all affected monitoring functions.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.