What is the main purpose of this SIM-330A 200-582-500-021 module?

SIM-330A is the rack power module (RPS6U) in the VM600 system, mainly responsible for converting external AC or DC input voltage into+5 VDC and ± 12 VDC required by the rack backplane and all installation cards (such as MPC4 monitoring card, CPUM processor card).

What should I do if the module fan makes a lot of noise or stops rotating?

SIM-330A has high power, and internal heat dissipation is crucial. Fan failure can cause the module to automatically shut down due to overheating protection. Fans are usually replaceable and vulnerable parts, and it is recommended to regularly clean the dust.

If only one power module is installed in the rack, which slot should it be plugged into?

The VM600 ABE04x rack has two dedicated power slots (usually on the far left or far right). When using a single module, it is recommended to plug it into slot PSU1 and ensure that a cover plate is installed in slot PSU2 to maintain the heat dissipation duct.

How to wire the AC input terminal of this module?

SIM-330A is typically installed in the power slot of the VM600 rack and wired through the ASPS (power input card) at the rear of the rack. Please ensure that the L (live wire), N (neutral wire), and PE (ground wire) are connected correctly, and that the grounding resistance meets industry standards (usually less than 1 Ω).

Does this module have a dry contact alarm output?

The module itself only has LED panels. But it communicates with CPUM (Rack Controller) through the rack base plate. If the power fails, CPUM will trigger a rack level

VM600 RPS6U SIM-330A 200-582-500-021

Name: VM600 RPS6U SIM-330A 200-582-500-021
Brand: Vibro-Meter
SKU: VM600 RPS6U SIM-330A 200-582-500-021

Power Supply Module

Vibro-Meter VM600 RPS6U SIM-330A 200-582-500-021

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

Power Supply Module
Two modules can be installed
In the rack to achieve power redundancy,
And the other module can bear
100% load in case of single module failure.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for VM600 RPS6U SIM-330A 200-582-500-021

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

0

Why Choose Apter Power?

1.Full one year warranty on all components

2.Professional after selling team

3.Same-day dispatch payment come

4.All units are fully tested well with certificate

5.Speak With an Expert Sales Representative

6.More than 20 years experience in automation

7.Stable employees more than 10+ years working experience
1
Common Applications
- Power Generation
- Oil & Gas
- Petrochemical & Chemical
- Heavy Industry
- Aerospace & Marine
2

Delivery and payment

Delivery

Logistic partners UPS, FedEx and DHL

International delivery available

Same day dispatch from warehouse inventory

Warranty

All parts new original are covered by Apterpower 12 month warranty

Returns

No hassle returns policy

Dedicated customer support team

Payment options

We accept Bank transfers and the following methods of payment:

Technical specifications for VM600 RPS6U SIM-330A 200-582-500-021

Manufacturer:

Vibro-Meter
Product Category:

General Automation
Spare Part Number:

VM600 RPS6U SIM-330A 200-582-500-021
Estimated shipping dimensions:

6x19x26.1cm
Weight:

2.4 kg
Tariff Code:

8537101190
Counliy of origin:

Switzerland
Communication input:

115/230 VAC
Maximum output power:

330 W
+5 VDC:

up to 50 A
+12 VDC:

up to 8 A
-12 VDC:

up to -4 A
Efficiency:

The typical value is about 84%
Working temperature:

-20 ° C to 60 ° C

Ask for Quote

Information

Overview Manuals Main functional features Internal Device Protection

The Vibro-meter SIM-330A (P/N: 200-582-500-021) is an RPS6U rack power module designed specifically for VM600 mechanical monitoring systems. As the core power supply unit, it provides stable low-voltage DC power supply for various processing cards (such as MPC4, CPUM, etc.) inside the monitoring rack.

High power output (330W)
Multi channel DC output
Power Supply Module

In order to meet the requirements of "zero shutdown" in harsh industrial environments such as power plants and refineries, SIM-330A has excellent fault tolerance. It supports dual redundancy configuration: two identical power modules can be installed simultaneously in a VM600 rack. When one module fails, the other module will seamlessly take over full load power supply in an instant, ensuring that the monitoring system is not interrupted.

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.

VIBRO METER SIM-330A 200-582-500-021 Power Supply Module Manuals, Datasheets, Drivers, Link

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.

Redundant design: One VM600 rack can install two RPS6U modules to achieve power redundancy. If one of them fails, the other can independently bear the load of the entire rack, ensuring uninterrupted operation of the monitoring system.

Comprehensive protection: equipped with overvoltage protection, short circuit protection, and overload protection functions, suitable for harsh industrial environments.

Compatibility: The model suffix -021 belongs to a newer version and can completely replace earlier old model versions (such as -013). The increase in hardware version ("h") usually does not affect interchangeability.

The VIBRO METER SIM-330A (200-582-500-021) power module is equipped with an extremely tight internal device protection mechanism, designed specifically for the continuous high reliability operation of the VM600 monitoring system. This module has excellent electrical safety protection, integrated with overvoltage protection (OVP), overcurrent protection, and short-circuit protection functions, which can effectively prevent input side surges or output terminal faults from causing damage to sensitive monitoring cards inside the rack.

FAQ View All FAQ

What is the main purpose of this SIM-330A 200-582-500-021 module?

SIM-330A is the rack power module (RPS6U) in the VM600 system, mainly responsible for converting external AC or DC input voltage into+5 VDC and ± 12 VDC required by the rack backplane and all installation cards (such as MPC4 monitoring card, CPUM processor card).
What should I do if the module fan makes a lot of noise or stops rotating?

SIM-330A has high power, and internal heat dissipation is crucial. Fan failure can cause the module to automatically shut down due to overheating protection. Fans are usually replaceable and vulnerable parts, and it is recommended to regularly clean the dust.
If only one power module is installed in the rack, which slot should it be plugged into?

The VM600 ABE04x rack has two dedicated power slots (usually on the far left or far right). When using a single module, it is recommended to plug it into slot PSU1 and ensure that a cover plate is installed in slot PSU2 to maintain the heat dissipation duct.

How to wire the AC input terminal of this module?

SIM-330A is typically installed in the power slot of the VM600 rack and wired through the ASPS (power input card) at the rear of the rack. Please ensure that the L (live wire), N (neutral wire), and PE (ground wire) are connected correctly, and that the grounding resistance meets industry standards (usually less than 1 Ω).
Does this module have a dry contact alarm output?

The module itself only has LED panels. But it communicates with CPUM (Rack Controller) through the rack base plate. If the power fails, CPUM will trigger a rack level

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.