What is MPC4 200-510-SSS-1HH?

MPC4 200-510-SSS-1HH is a VM600 standard machinery-protection card configuration family.

Which system uses MPC4 200-510-SSS-1HH?

Use MPC4 200-510-SSS-1HH only in the manufacturer system and hardware arrangement stated in the technical parameters and installation notice on this page.

How do engineers confirm MPC4 200-510-SSS-1HH compatibility?

Match the complete MPC4 200-510-SSS-1HH label, hardware revision, host platform, companion hardware, connector and project configuration before replacement.

What should be checked before installing MPC4 200-510-SSS-1HH?

Isolate energy, verify wiring and connector orientation, protect the hardware from ESD and compare every field connection with the approved drawing for MPC4 200-510-SSS-1HH.

What commissioning test is required for MPC4 200-510-SSS-1HH?

Restore power in a controlled sequence and verify status, diagnostics, channel or output response, alarms and the intended process function of MPC4 200-510-SSS-1HH.

How should a technician troubleshoot MPC4 200-510-SSS-1HH?

Record indicators, diagnostics, field measurements, configuration, companion hardware and the operating event before deciding whether MPC4 200-510-SSS-1HH is faulty.

Can MPC4 200-510-SSS-1HH replace a similar model directly?

Only after the complete catalog number, series or suffix, electrical rating, connectors, firmware and system compatibility have been compared.

What information should an RFQ for MPC4 200-510-SSS-1HH include?

Include MPC4 200-510-SSS-1HH, quantity, complete nameplate photographs, hardware revision, installed system, companion hardware and required accessories.

What version applies to MPC4 200-510-SSS-1HH?

The product-specific value for MPC4 200-510-SSS-1HH is Standard MPC4. Match it to the installed unit and application before work.

What ordering pattern applies to MPC4 200-510-SSS-1HH?

The product-specific value for MPC4 200-510-SSS-1HH is 200-510-SSS-1Hh. Match it to the installed unit and application before work.

What dynamic channels applies to MPC4 200-510-SSS-1HH?

The product-specific value for MPC4 200-510-SSS-1HH is 4. Match it to the installed unit and application before work.

What tachometer channels applies to MPC4 200-510-SSS-1HH?

The product-specific value for MPC4 200-510-SSS-1HH is 2. Match it to the installed unit and application before work.

MPC4 200-510-SSS-1HH

Name: MPC4 200-510-SSS-1HH
Brand: Vibro-Meter
SKU: 200-510-SSS-1HH

VM600 standard machinery-protection card configuration family

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

VIBRO METER MPC4 200-510-SSS-1HH is the standard VM600 machinery-protection card ordering pattern. SSS and HH identify the installed firmware and hardware revisions.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for MPC4 200-510-SSS-1HH

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for MPC4 200-510-SSS-1HH

Manufacturer:

Vibro-Meter
Product Category:

Machinery Monitoring Systems
Spare Part Number:

200-510-SSS-1HH
Estimated shipping dimensions:

2x19x26.1cm
Weight:

0.4 kg
Tariff Code:

8537101190
Counliy of origin:

Switzerland
Version:

Standard MPC4
Ordering pattern:

200-510-SSS-1Hh
Dynamic channels:

4
Tachometer channels:

2
Relay outputs:

4 configurable relays plus 1 AR relay
Rack interface:

VME and VM600 Raw bus
Companion I/O card:

IOC4T
Revision rule:

SSS = firmware; Hh = hardware

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

Vibro-Meter MPC4 200-510-SSS-1HH coordinates machinery-protection measurement processing within a VM600 rack.

VM600 rack integration
Measurement-chain supervision
Alarm and trip workflow support
Configured-channel commissioning

Install MPC4 200-510-SSS-1HH only with the specified VM600 rack, paired measurement hardware and approved protection configuration.

Important Notice: Confirm whether the required rack hardware, matched transducer chain, extension leads and configured protection accessories for MPC4 200-510-SSS-1HH are included in the quotation or stock description.

Apter Power MPC4 200-510-SSS-1HH Manuals and Guides

Important Notice: These are two separate Apter Power documents independently prepared from manufacturer-published information. Confirm the physical nameplate, current manufacturer documents and installed-system requirements before configuration or installation. They do not replace manufacturer manuals.

MPC4 200-510-SSS-1HH installed-base maintenance

Supports like-for-like service of the documented VM600 standard machinery-protection card configuration family.

MPC4 200-510-SSS-1HH compatibility review

Checks host hardware, revision, companion components, wiring and configuration before replacement.

MPC4 200-510-SSS-1HH installation planning

Defines isolation, ESD, mounting, connection and parameter checks before field work.

MPC4 200-510-SSS-1HH commissioning

Supports controlled diagnostic, channel, communication or process-response checks after installation.

Read the applicable Parker Meggitt instructions before work. Verify MPC4 200-510-SSS-1HH and the installed-system configuration.

Verify model MPC4 200-510-SSS-1HH and the complete order code on the physical label before use.

Confirm the numeric firmware and hardware revision in place of SSS and Hh, then match the IOC4T revision and VM600 configuration before replacement.

Match every MPC4 200-510-SSS-1HH connector, terminal, cable and companion assembly before moving field wiring.

Back up the applicable controller, monitor, HMI or I/O configuration before replacing MPC4 200-510-SSS-1HH.

Isolate energy and follow the approved site safety procedure before handling MPC4 200-510-SSS-1HH.

Follow ESD controls and protect MPC4 200-510-SSS-1HH connectors and printed-circuit assemblies during handling.

Do not transfer ratings or suffix meanings from a similar model to MPC4 200-510-SSS-1HH.

After installing MPC4 200-510-SSS-1HH, complete the relevant power, channel, link, diagnostic, alarm and fail-state checks.

Alternative Names

200-510-SSS-1HH

Technical notes

Confirm the numeric firmware and hardware revision in place of SSS and Hh, then match the IOC4T revision and VM600 configuration before replacement.

FAQ View All FAQ

What is MPC4 200-510-SSS-1HH?

MPC4 200-510-SSS-1HH is a VM600 standard machinery-protection card configuration family.
Which system uses MPC4 200-510-SSS-1HH?

Use MPC4 200-510-SSS-1HH only in the manufacturer system and hardware arrangement stated in the technical parameters and installation notice on this page.
How do engineers confirm MPC4 200-510-SSS-1HH compatibility?

Match the complete MPC4 200-510-SSS-1HH label, hardware revision, host platform, companion hardware, connector and project configuration before replacement.
What should be checked before installing MPC4 200-510-SSS-1HH?

Isolate energy, verify wiring and connector orientation, protect the hardware from ESD and compare every field connection with the approved drawing for MPC4 200-510-SSS-1HH.
What commissioning test is required for MPC4 200-510-SSS-1HH?

Restore power in a controlled sequence and verify status, diagnostics, channel or output response, alarms and the intended process function of MPC4 200-510-SSS-1HH.
How should a technician troubleshoot MPC4 200-510-SSS-1HH?

Record indicators, diagnostics, field measurements, configuration, companion hardware and the operating event before deciding whether MPC4 200-510-SSS-1HH is faulty.

Can MPC4 200-510-SSS-1HH replace a similar model directly?

Only after the complete catalog number, series or suffix, electrical rating, connectors, firmware and system compatibility have been compared.
What information should an RFQ for MPC4 200-510-SSS-1HH include?

Include MPC4 200-510-SSS-1HH, quantity, complete nameplate photographs, hardware revision, installed system, companion hardware and required accessories.
What version applies to MPC4 200-510-SSS-1HH?

The product-specific value for MPC4 200-510-SSS-1HH is Standard MPC4. Match it to the installed unit and application before work.
What ordering pattern applies to MPC4 200-510-SSS-1HH?

The product-specific value for MPC4 200-510-SSS-1HH is 200-510-SSS-1Hh. Match it to the installed unit and application before work.
What dynamic channels applies to MPC4 200-510-SSS-1HH?

The product-specific value for MPC4 200-510-SSS-1HH is 4. Match it to the installed unit and application before work.
What tachometer channels applies to MPC4 200-510-SSS-1HH?

The product-specific value for MPC4 200-510-SSS-1HH is 2. Match it to the installed unit and application before work.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.