Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6DP1900-8AA
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6DP1900-8AA
-
Manufacturer:Siemens
-
Product Category:DCS Systems
-
Spare Part Number:6DP1900-8AA
-
Estimated shipping dimensions:2x26.4x26.3cm
-
Weight:0.46 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Module designation:SYS 900
-
Hardware type:Monitoring module
-
System family:TELEPERM XP
-
Specified host:FUM B subrack EU901
-
Alternate host:APF subrack EU910
-
Installation-set relation:Core module in 6DP1910-8AA00
-
Companion items:Signal and power-supply cable set
-
Protection item in set:4 A circuit breaker and suppressor diode
-
Acceptance:Supply, alarm and monitored-subrack status
Information
Overview
Manuals
Common Applications
Product Precautions
Siemens 6DP1900-8AA supervises the assigned TELEPERM XP subrack through the SYS 900 signal, supply and cabinet-alarm paths.
- 6DP1900-8AA
- SYS 900
- Monitoring module
- TELEPERM XP
Host identity, cable destinations, supply protection and alarm transmission are checked together because an error in any one path can produce an incorrect subrack status.
Important Notice: Identify EU901 or EU910 and label both signal and supply cables before replacing SYS 900.
Siemens 6DP1900-8AA Manuals & Downloads
Siemens 6DP1900-8AA Technical Reference (PDF)Siemens 6DP1900-8AA Installation & Commissioning Guide (PDF)
The technical reference explains SYS 900 host choices and installation-set relationships; the field guide covers cable mapping, protection, energization and alarm testing.
EU901 subrack monitoring
Restores the SYS 900 supervision path in a FUM B cabinet.
EU910 APF monitoring
Supports the specified alternative APF subrack installation.
Installation-set service
Checks the monitoring module together with its signal and supply cable set.
Cabinet alarm recovery
Validates the SYS 900 alarm path after controlled power restoration.
Confirm the complete SYS 900 monitoring path of 6DP1900-8AA before releasing the EU901 or EU910 subrack.
1
Read 6DP1900-8AA and SYS 900 from the installed module before work.
2
Identify whether the receiving host is EU901 or EU910.
3
Record all signal-cable and power-supply cable destinations.
4
Confirm the associated protective device and suppressor arrangement.
5
Isolate the monitored subrack and prove its supply safe.
6
Restore the complete cable set without exchanging signal and supply paths.
7
Energize the subrack in a controlled sequence and observe SYS 900 indications.
8
Verify cabinet alarm transmission and stable monitored status before release.
Technical notes
Match 6DP1900-8AA to the complete installed identity and TELEPERM XP FUM B / APF position. Preserve every connection and setting; release only after controlled verification of system-status monitoring for a specified EU901 or EU910 subrack.
FAQ View All FAQ
-
What does Siemens 6DP1900-8AA identify?It identifies the SYS 900 monitoring module used in TELEPERM XP subrack installations.
-
Which FUM B host is specified for Siemens 6DP1900-8AA?The configuration uses the EU901 subrack.
-
Which APF host is specified for Siemens 6DP1900-8AA?The monitoring module is also listed for the EU910 APF subrack.
-
How is Siemens 6DP1900-8AA SYS 900 related to 6DP1910-8AA00?6DP1900-8AA is the monitoring module included in that specified installation set.
-
Which companion parts matter when replacing Siemens 6DP1900-8AA?The signal cable, supply cable set, protective device and suppressor arrangement must stay matched.
-
What should be recorded before disconnecting Siemens 6DP1900-8AA?Capture the host identity, every cable destination, supply protection and current SYS 900 indication.
-
What should be observed while energizing Siemens 6DP1900-8AA?Check the supply sequence, front indications, monitored-subrack state and absence of unexpected alarms.
-
What is the SYS 900 release criterion for Siemens 6DP1900-8AA?The subrack must remain stable and its cabinet alarm path must respond correctly during the acceptance test.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.