Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6ES5454-4UA13
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6ES5454-4UA13
-
Manufacturer:Siemens
-
Product Category:PLC Systems
-
Spare Part Number:6ES5454-4UA13
-
Estimated shipping dimensions:25.5x3.9x19.5cm
-
Weight:0.48 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Module type:Digital output
-
Output count:16, short-circuit protected
-
Rated supply:24 V DC
-
Supply range:20 to 30 V DC
-
Isolation:Isolated, one group of 16 outputs
-
Channel current:10 mA to 2 A
-
Group current limit:4 A per 4 outputs
-
Maximum unshielded cable:400 m
-
Short-circuit indication:Red LED for each group of 4 outputs
Information
Overview
Manuals
Common Applications
Product Precautions
Siemens 6ES5454-4UA13 supplies 16 isolated, short-circuit-protected 24 V DC output channels for higher-current SIMATIC S5 loads.
- Provides 16 isolated short-circuit-protected 24 V DC outputs.
- Switches documented loads from 10 mA to 2 A per channel.
- Limits each four-output group to 4 A total switching current.
- Uses the exact 40 mm-wide 4UA13 execution.
The exact 4UA13 execution uses a 20–30 V DC supply, switches 10 mA to 2 A per channel and limits each four-output group to 4 A total. The manual lists 400 m maximum unshielded output wiring and a 40 × 255 × 195 mm module size.
Important Notice: preserve the complete 6ES5454-4UA13 identity, all 16 output assignments, four-channel group loads, enable circuit, fusing and short-circuit indication before replacement.
Siemens 6ES5454-4UA13 Manuals & Downloads
Siemens 6ES5454-4UA13 Official System Manual Excerpt (PDF)Siemens 6ES5454-4UA13 Installation & Commissioning Guide (PDF)
The documents separate exact product evidence from the field sequence for identity, isolation, installation, verification and controlled handover.
Higher-current actuator control
Drives documented 24 V DC loads up to 2 A per channel.
Grouped output service
Maintains the 4 A limit and fuse plan for each four-channel group.
Legacy rack replacement
Restores the exact 4UA13 output position and enable circuit.
Short-circuit diagnosis
Uses group LEDs and the H+ signal to isolate output faults.
Apply these checks to the exact Siemens 6ES5454-4UA13 position before isolation, replacement or release.
1
Confirm the complete Siemens 6ES5454-4UA13 marking before work.
2
Place every connected actuator in the approved maintenance state.
3
Record all 16 outputs, four-channel groups, fuses and load currents.
4
Document the enable circuit and H+ short-circuit indication wiring.
5
Verify the 20–30 V DC supply before reconnection.
6
Keep each channel and four-output group within the documented load limits.
7
Review every group LED and controller diagnostic after energization.
8
Functionally prove all 16 outputs before service release.
Technical notes
Record all 16 outputs, four-channel group currents, fuses, enable wiring and H+ indication before removal. After energization, inspect every short-circuit LED and prove each output under the retained load plan.
FAQ View All FAQ
-
What role does Siemens 6ES5454-4UA13 perform?It is a 16-channel isolated SIMATIC S5 digital output module for 24 V DC loads up to 2 A per channel.
-
How many outputs does Siemens 6ES5454-4UA13 provide?It provides 16 isolated short-circuit-protected outputs.
-
What supply range applies to Siemens 6ES5454-4UA13?The exact module data lists 20 to 30 V DC.
-
What channel current applies to Siemens 6ES5454-4UA13?The documented switching-current range is 10 mA to 2 A per channel.
-
What group-current limit applies to Siemens 6ES5454-4UA13?The total switching current is limited to 4 A per group of four outputs.
-
What cable length is documented for Siemens 6ES5454-4UA13?The maximum unshielded output cable length is 400 m.
-
How does Siemens 6ES5454-4UA13 indicate a short circuit?A red LED reports a short circuit for each group of four outputs.
-
What should confirm Siemens 6ES5454-4UA13 after installation?Confirm the exact article, retained wiring or cable arrangement, module diagnostics and every affected field signal before service release.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.