Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6ES5441-4UA14
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6ES5441-4UA14
-
Manufacturer:Siemens
-
Product Category:PLC Systems
-
Spare Part Number:6ES5441-4UA14
-
Estimated shipping dimensions:25.4x2x19.5cm
-
Weight:0.38 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Module type:Digital output
-
Output count:32, short-circuit protected
-
Rated supply:24 V DC
-
Supply range:20 to 30 V DC
-
Isolation:Non-isolated
-
Channel current:5 mA to 0.5 A
-
Group current limit:4 A per 8 outputs
-
Maximum unshielded cable:400 m
-
Short-circuit indication:Red LED for each group of 8 outputs
Information
Overview
Manuals
Common Applications
Product Precautions
Siemens 6ES5441-4UA14 supplies 32 short-circuit-protected 24 V DC output channels in a 20 mm-wide SIMATIC S5 U-format module.
- Provides 32 short-circuit-protected 24 V DC outputs.
- Switches documented loads from 5 mA to 0.5 A per channel.
- Limits each eight-output group to 4 A total switching current.
- Uses a 20 mm-wide non-isolated U-format module.
The exact 4UA14 execution uses a 20–30 V DC supply, supports up to 0.5 A per channel and limits total switching current to 4 A per group of eight outputs. The manual lists 400 m maximum unshielded output wiring and a 20 × 255 × 195 mm module size.
Important Notice: preserve the complete 6ES5441-4UA14 identity, all 32 output assignments, eight-channel group loads, enable circuit, fusing and short-circuit indication before replacement.
Siemens 6ES5441-4UA14 Manuals & Downloads
Siemens 6ES5441-4UA14 Official System Manual Excerpt (PDF)Siemens 6ES5441-4UA14 Installation & Commissioning Guide (PDF)
The documents separate exact product evidence from the field sequence for identity, isolation, installation, verification and controlled handover.
24 V DC actuator control
Drives documented discrete loads within the per-channel current limit.
Grouped output service
Maintains the 4 A limit and fuse plan for each eight-channel group.
Legacy rack replacement
Restores the exact 4UA14 output position and enable circuit.
Short-circuit diagnosis
Uses group LEDs and the H+ signal to isolate output faults.
Apply these checks to the exact Siemens 6ES5441-4UA14 position before isolation, replacement or release.
1
Confirm the complete Siemens 6ES5441-4UA14 marking before work.
2
Place every connected actuator in the approved maintenance state.
3
Record all 32 outputs, eight-channel groups, fuses and load currents.
4
Document the enable circuit and H+ short-circuit indication wiring.
5
Verify the 20–30 V DC supply before reconnection.
6
Keep each channel and eight-output group within the documented load limits.
7
Review every group LED and controller diagnostic after energization.
8
Functionally prove all 32 outputs before service release.
Technical notes
Record all 32 output assignments, group currents, fuses, enable wiring and H+ indication before removal. After energization, verify short-circuit status and prove each output under the retained load plan.
FAQ View All FAQ
-
What role does Siemens 6ES5441-4UA14 perform?It is a 32-channel non-isolated SIMATIC S5 digital output module for 24 V DC loads up to 0.5 A per channel.
-
How many outputs does Siemens 6ES5441-4UA14 provide?It provides 32 short-circuit-protected digital outputs.
-
What supply range applies to Siemens 6ES5441-4UA14?The exact module data lists 20 to 30 V DC.
-
What channel current applies to Siemens 6ES5441-4UA14?The documented switching-current range is 5 mA to 0.5 A per channel.
-
What group-current limit applies to Siemens 6ES5441-4UA14?The total switching current is limited to 4 A per group of eight outputs.
-
What cable length is documented for Siemens 6ES5441-4UA14?The maximum unshielded output cable length is 400 m.
-
How does Siemens 6ES5441-4UA14 indicate a short circuit?A red LED reports a short circuit for each group of eight outputs.
-
What should confirm Siemens 6ES5441-4UA14 after installation?Confirm the exact article, retained wiring or cable arrangement, module diagnostics and every affected field signal before service release.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.