Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6SY7010-0AB07
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include 6SY7010-0AB07 and any hardware revision or assembly markings visible on the item. Keep the complete reference on your enquiry and quotation.
-
Check the offered item before ordering
Request available label, connector and mounting photos. Have your maintenance team compare the offered 6SY7010-0AB07 with the installed equipment and applicable Siemens documentation.
Technical specifications for 6SY7010-0AB07
-
Manufacturer:Siemens
-
Product Category:Servo Drives
-
Spare Part Number:6SY7010-0AB07
-
Weight:23.8 kg
-
Tariff Code:8537101190
-
Block execution:Layer A with snubber circuit
-
System function:Infeed and regenerative feedback
-
Related equipment current:1780 A host-unit designation
-
Related equipment supply:3-phase 380–460 V AC, 50/60 Hz host-unit designation
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- Siemens 6SY7010-0AB07 is a layer A thyristor block with a snubber circuit for the infeed and regenerative-feedback section of a SIMOVERT MASTERDRIVES installation.
Product type: Thyristor Block
Product series: SIMOVERT MASTERDRIVES
Block execution: Layer A with snubber circuit
Product series: SIMOVERT MASTERDRIVES
Block execution: Layer A with snubber circuit
Siemens 6SY7010-0AB07 is a layer A thyristor block with a snubber circuit for the infeed and regenerative-feedback section of a SIMOVERT MASTERDRIVES installation. It is a power-stage spare component, so its role must be assessed within the complete converter, cooling arrangement and control system. The related equipment is identified for a 1780 A, three-phase 380–460 V AC, 50/60 Hz application; these host-unit figures are not standalone ratings of the loose block.
The integrated snubber arrangement is part of the identified block execution. Before replacement, compare the complete 6SY7010-0AB07 marking, device position, terminal orientation, mechanical mounting and companion power components with the installed converter. A physically similar thyristor block can differ in circuit position or assembly detail; installation decisions should follow the converter drawing and service instructions.
Service preparation should record the installed power-stage connections and protective hardware before disassembly. Confirm the correct isolation, discharge and thermal-interface procedures for the actual converter. After the component is fitted, verify the associated infeed/regenerative function and fault indications under the approved commissioning process, without treating the spare block as a complete converter assembly.
The integrated snubber arrangement is part of the identified block execution. Before replacement, compare the complete 6SY7010-0AB07 marking, device position, terminal orientation, mechanical mounting and companion power components with the installed converter. A physically similar thyristor block can differ in circuit position or assembly detail; installation decisions should follow the converter drawing and service instructions.
Service preparation should record the installed power-stage connections and protective hardware before disassembly. Confirm the correct isolation, discharge and thermal-interface procedures for the actual converter. After the component is fitted, verify the associated infeed/regenerative function and fault indications under the approved commissioning process, without treating the spare block as a complete converter assembly.
Controller platform reference: SIMOVERT MASTERDRIVES. Match the installed system, complete marking and approved configuration before replacement.
Technical downloads for Siemens 6SY7010-0AB07: an Apter Power technical reference and installation verification guide.
-
Siemens 6SY7010-0AB07 technical reference
Apter Power technical reference - PDF, 3 pages. Product identity, verified characteristics, configuration and service context. -
Siemens 6SY7010-0AB07 installation guide
Apter Power installation guide - PDF, 2 pages. Model checks, interface review and commissioning verification.
These Apter Power references support product identification and installation planning. Follow the applicable Siemens procedures and approved project controls.
Drive application: Siemens 6SY7010-0AB07 is the layer A thyristor block with an integrated snubber circuit in the infeed and regenerative-feedback section of a SIMOVERT MASTERDRIVES converter. It serves the converter power stage rather than functioning as a complete drive.
Compatibility scope: The block belongs in the matching layer A circuit of the installed converter. The 1780 A and three-phase 380–460 V AC, 50/60 Hz figures identify related converter equipment; they are not independent ratings of the loose block.
Compatibility scope: The block belongs in the matching layer A circuit of the installed converter. The 1780 A and three-phase 380–460 V AC, 50/60 Hz figures identify related converter equipment; they are not independent ratings of the loose block.
-
Converter infeed
Provides the specified thyristor-block execution in a matched MASTERDRIVES infeed power stage. -
Regenerative feedback
Used in the feedback path of the related converter arrangement when regenerative operation is configured. -
Layer A circuit
The layer A location and snubber-equipped execution distinguish this block from other power-stage positions. -
Assembly compatibility
Applicability depends on the installed converter order code, circuit position and companion power components.
Match 6SY7010-0AB07 to the installed hardware and approved configuration before replacement or commissioning.
Match the identification
Match the complete 6SY7010-0AB07 marking and layer A/snubber assembly.
Review the host system
Check the fitted infeed/regenerative converter designation and power-stage location.
Preserve the installation record
Document terminals, insulating parts, thermal interface and companion devices before removal.
Confirm the service procedure
Apply the converter isolation, discharge, assembly and functional verification procedures.
Protect the hardware
Use applicable isolation and electrostatic-discharge controls; protect the board, connectors and mechanical retainers during handling.
Verify the restored system
Complete the approved site acceptance checks, including diagnostics and affected functions, before returning equipment to service.
Alternative Names
6SY7010 0AB07
Siemens 6SY7010-0AB07
Technical notes
System relationship: Check the fitted infeed/regenerative converter designation and power-stage location.
Applicability: The 1780 A and 380–460 V AC figures describe the related converter equipment, not an independent rating of the offered block.
Technical reference: Siemens SiePortal product entry for 6SY7010-0AB07.
FAQ View All FAQ
-
What is the layer A function of 6SY7010-0AB07?It is the thyristor block with snubber circuit in the related infeed/regenerative-feedback assembly.
-
Does the 1780 A designation of 6SY7010-0AB07 describe the loose block?No. It identifies the related converter equipment and must not be presented as the independent block rating.
-
Which AC equipment class is associated with 6SY7010-0AB07?The Siemens product entry associates this block with a three-phase 380–460 V AC, 50/60 Hz converter arrangement.
-
Which assembly details matter when selecting 6SY7010-0AB07?Compare the exact order code, layer A position, snubber arrangement, terminals and mounting with the fitted converter.
-
What should be recorded before exchanging 6SY7010-0AB07?Record power-stage connections, insulating parts, thermal interface and companion components.
-
Are companion power components included with 6SY7010-0AB07?Confirm every supplied component, connector and document in the quotation; the reference to a converter does not mean the converter is included.
-
Can current photos and dispatch for 6SY7010-0AB07 be confirmed?Request current photos of the marking and assembly, available quantity and dispatch date in the quotation.
-
Which acceptance checks follow installation of 6SY7010-0AB07?Follow the converter isolation, discharge and assembly procedure, then verify infeed/regenerative behavior and fault indications.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.