Can 6SE7090-0XX84-0FF5 be replaced by a visually similar module?

A substitute requires an explicit manufacturer-supported match for the complete 6SE7090-0XX84-0FF5 catalog identity, host platform, interface, ratings and configuration.

What maintenance evidence should be retained for 6SE7090-0XX84-0FF5?

Keep the as-found connection record, installed position, software or parameter revision, diagnostic state and signed functional-test result.

What system function does 6SE7090-0XX84-0FF5 provide?

6SE7090-0XX84-0FF5 is the simovert masterdrives cbp2 profibus communication module used in the documented SIMOVERT MASTERDRIVES Motion Control communications arrangement. It connects a SIMOVERT MASTERDRIVES Motion Control unit to a PROFIBUS network through the CBP2 option interface.

Which host hardware must be checked before installing 6SE7090-0XX84-0FF5?

Confirm the exact SIMOVERT MASTERDRIVES Motion Control communications host, assigned position, mating connectors and companion hardware against the controlling manufacturer record for 6SE7090-0XX84-0FF5.

What wiring or connector record is required before replacing 6SE7090-0XX84-0FF5?

Record every connector identifier, terminal, conductor, polarity, shield, jumper and channel or node assignment before removal.

How should power be isolated for 6SE7090-0XX84-0FF5?

Follow the equipment-specific isolation procedure, remove applicable control and field energy, discharge stored energy and prove the required safe state before touching the module.

Which configuration should be restored after replacing 6SE7090-0XX84-0FF5?

Restore only the approved project, parameters, addresses and channel assignments retained from the installed system record; do not copy settings from a different catalog number.

How should engineers commission 6SE7090-0XX84-0FF5?

Energize in the documented sequence, review device and host diagnostics, test the intended input, output or communication path under controlled conditions and retain the results.

Siemens 6SE7090-0XX84-0FF5 SIMOVERT MASTERDRIVES CBP2 PROFIBUS communication module

Name: 6SE7090-0XX84-0FF5
Brand: Siemens
SKU: 6SE7090-0XX84-0FF5

Technical specifications for 6SE7090-0XX84-0FF5

Manufacturer:

Siemens

Product Category:

Server Driver

Spare Part Number:

6SE7090-0XX84-0FF5

Estimated shipping dimensions:

9.6x8.3x1.2cm

Weight:

0.06 kg

Tariff Code:

8537101190

Counliy of origin:

Germany

Article number:

6SE7090-0XX84-0FF5

Module designation:

CBP2

Equipment class:

Communication module

Communication protocol:

PROFIBUS

Host platform:

SIMOVERT MASTERDRIVES Motion Control

Quantity unit:

1 piece

Information

Overview Manuals Common Applications Product Precautions

Siemens 6SE7090-0XX84-0FF5 is simovert masterdrives cbp2 profibus communication module. It connects a SIMOVERT MASTERDRIVES Motion Control unit to a PROFIBUS network through the CBP2 option interface.

Adds PROFIBUS communication to the installed drive
Uses the CBP2 option-module identity
Transfers cyclic control and drive status data
Integrates the drive with the configured PROFIBUS master

6SE7090-0XX84-0FF5 is installed with SIMOVERT MASTERDRIVES Motion Control unit, PROFIBUS master and bus cable, approved node address and parameter set, drive commissioning software and diagnostics.

Engineered applications include PROFIBUS drive integration, Legacy motion-control network repair, Drive node replacement, Cyclic control-word and status-word verification.

Important Notice: Back up the drive and bus configuration, isolate the converter, preserve the PROFIBUS address and termination, then verify cyclic data, diagnostics and commanded stop behavior before restoring automatic control.

Apter Power 6SE7090-0XX84-0FF5 Manuals and Guides

Apter Power 6SE7090-0XX84-0FF5 Product Technical Reference PDF 6SE7090-0XX84-0FF5 Engineering Installation and Verification Workbook

The first document presents model-specific technical identity and engineering data. The second provides a separate installation, connection and commissioning workflow.

PROFIBUS drive integration

6SE7090-0XX84-0FF5 supports this documented SIMOVERT MASTERDRIVES Motion Control communications engineering task.

Legacy motion-control network repair

6SE7090-0XX84-0FF5 supports this documented SIMOVERT MASTERDRIVES Motion Control communications engineering task.

Drive node replacement

6SE7090-0XX84-0FF5 supports this documented SIMOVERT MASTERDRIVES Motion Control communications engineering task.

Cyclic control-word and status-word verification

6SE7090-0XX84-0FF5 supports this documented SIMOVERT MASTERDRIVES Motion Control communications engineering task.

Read the applicable Siemens instructions before work. Verify 6SE7090-0XX84-0FF5 and the installed-system configuration.

Verify the complete 6SE7090-0XX84-0FF5 marking and its documented SIMOVERT MASTERDRIVES Motion Control communications position before field work.

Place the connected equipment in the approved maintenance state before removing 6SE7090-0XX84-0FF5.

Isolate every applicable power, signal and stored-energy source, then prove a safe state at 6SE7090-0XX84-0FF5.

Record the installed connectors, terminals, jumpers and channel or node assignments before disconnection.

Use ESD controls and protect keyed interfaces, edge connectors and exposed electronic assemblies.

Restore only the approved SIMOVERT MASTERDRIVES Motion Control communications hardware arrangement and configuration after replacement.

Energize 6SE7090-0XX84-0FF5 in the documented sequence and review local, host and network diagnostics.

Prove the intended controlled function and retain the final acceptance record before production release.

FAQS

Can 6SE7090-0XX84-0FF5 be replaced by a visually similar module?

A substitute requires an explicit manufacturer-supported match for the complete 6SE7090-0XX84-0FF5 catalog identity, host platform, interface, ratings and configuration.
What maintenance evidence should be retained for 6SE7090-0XX84-0FF5?

Keep the as-found connection record, installed position, software or parameter revision, diagnostic state and signed functional-test result.
What system function does 6SE7090-0XX84-0FF5 provide?

6SE7090-0XX84-0FF5 is the simovert masterdrives cbp2 profibus communication module used in the documented SIMOVERT MASTERDRIVES Motion Control communications arrangement. It connects a SIMOVERT MASTERDRIVES Motion Control unit to a PROFIBUS network through the CBP2 option interface.
Which host hardware must be checked before installing 6SE7090-0XX84-0FF5?

Confirm the exact SIMOVERT MASTERDRIVES Motion Control communications host, assigned position, mating connectors and companion hardware against the controlling manufacturer record for 6SE7090-0XX84-0FF5.
What wiring or connector record is required before replacing 6SE7090-0XX84-0FF5?

Record every connector identifier, terminal, conductor, polarity, shield, jumper and channel or node assignment before removal.
How should power be isolated for 6SE7090-0XX84-0FF5?

Follow the equipment-specific isolation procedure, remove applicable control and field energy, discharge stored energy and prove the required safe state before touching the module.
Which configuration should be restored after replacing 6SE7090-0XX84-0FF5?

Restore only the approved project, parameters, addresses and channel assignments retained from the installed system record; do not copy settings from a different catalog number.
How should engineers commission 6SE7090-0XX84-0FF5?

Energize in the documented sequence, review device and host diagnostics, test the intended input, output or communication path under controlled conditions and retain the results.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

6SE7090-0XX84-0FF5

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 6SE7090-0XX84-0FF5

Technical specifications for 6SE7090-0XX84-0FF5

Information

Information