How should power be isolated for 6SE7035-1EJ84-1JC2?

Follow the equipment-specific isolation procedure, remove applicable control and field energy, discharge stored energy and prove the required safe state before touching the module.

Which configuration should be restored after replacing 6SE7035-1EJ84-1JC2?

Restore only the approved project, parameters, addresses and channel assignments retained from the installed system record; do not copy settings from a different catalog number.

How should engineers commission 6SE7035-1EJ84-1JC2?

Energize in the documented sequence, review device and host diagnostics, test the intended input, output or communication path under controlled conditions and retain the results.

Can 6SE7035-1EJ84-1JC2 be replaced by a visually similar module?

A substitute requires an explicit manufacturer-supported match for the complete 6SE7035-1EJ84-1JC2 catalog identity, host platform, interface, ratings and configuration.

What maintenance evidence should be retained for 6SE7035-1EJ84-1JC2?

Keep the as-found connection record, installed position, software or parameter revision, diagnostic state and signed functional-test result.

What system function does 6SE7035-1EJ84-1JC2 provide?

6SE7035-1EJ84-1JC2 is the simovert masterdrives igd7 inverter gating module used in the documented SIMOVERT MASTERDRIVES 380-460 V inverter hardware arrangement. It controls the inverter gate signals in the documented 510 A SIMOVERT MASTERDRIVES power unit.

Which host hardware must be checked before installing 6SE7035-1EJ84-1JC2?

Confirm the exact SIMOVERT MASTERDRIVES 380-460 V inverter hardware host, assigned position, mating connectors and companion hardware against the controlling manufacturer record for 6SE7035-1EJ84-1JC2.

What wiring or connector record is required before replacing 6SE7035-1EJ84-1JC2?

Record every connector identifier, terminal, conductor, polarity, shield, jumper and channel or node assignment before removal.

Siemens 6SE7035-1EJ84-1JC2 SIMOVERT MASTERDRIVES IGD7 inverter gating module

Name: 6SE7035-1EJ84-1JC2
Brand: Siemens
SKU: 6SE7035-1EJ84-1JC2

6SE7035-1EJ84-1JC2

SIMOVERT MASTERDRIVES IGD7 inverter gating module

In Stock

Ships by Monday, September 21

Fast Shipping Available

Technical specifications for 6SE7035-1EJ84-1JC2

Manufacturer:

Siemens

Product Category:

Server Driver

Spare Part Number:

6SE7035-1EJ84-1JC2

Estimated shipping dimensions:

65.5x30x3cm

Weight:

0.88 kg

Tariff Code:

8537101190

Counliy of origin:

Germany

Module designation:

IGD7

Equipment class:

Inverter control module

AC device voltage:

380-460 V 3 AC

AC frequency:

50/60 Hz

DC-link voltage:

510-620 V DC

Device current:

510 A

Package size:

69.4 x 34.5 x 5.2 cm

Information

Overview Manuals Common Applications Product Precautions

Siemens 6SE7035-1EJ84-1JC2 is simovert masterdrives igd7 inverter gating module. It controls the inverter gate signals in the documented 510 A SIMOVERT MASTERDRIVES power unit.

Provides the IGD7 gate-control function
Matches 380-460 V three-phase converter hardware
Supports a 510-620 V DC-link section
Interfaces a documented 510 A inverter power stage

6SE7035-1EJ84-1JC2 is installed with 510 A SIMOVERT MASTERDRIVES power section, IGD7 gate-drive harness, matching control electronics, converter cooling and protection circuits.

Engineered applications include High-current inverter repair, Gate-drive channel verification, MASTERDRIVES power-stack replacement, Controlled motor-drive recommissioning.

Important Notice: Verify DC-link discharge and the 510 A power-section identity, preserve every gate and feedback connector, inspect cooling hardware, and test pulse inhibition before enabling torque.

Apter Power 6SE7035-1EJ84-1JC2 Manuals and Guides

Apter Power 6SE7035-1EJ84-1JC2 Product Technical Reference PDF 6SE7035-1EJ84-1JC2 Engineering Installation and Verification Workbook

The first document presents model-specific technical identity and engineering data. The second provides a separate installation, connection and commissioning workflow.

High-current inverter repair

6SE7035-1EJ84-1JC2 supports this documented SIMOVERT MASTERDRIVES 380-460 V inverter hardware engineering task.

Gate-drive channel verification

6SE7035-1EJ84-1JC2 supports this documented SIMOVERT MASTERDRIVES 380-460 V inverter hardware engineering task.

MASTERDRIVES power-stack replacement

6SE7035-1EJ84-1JC2 supports this documented SIMOVERT MASTERDRIVES 380-460 V inverter hardware engineering task.

Controlled motor-drive recommissioning

6SE7035-1EJ84-1JC2 supports this documented SIMOVERT MASTERDRIVES 380-460 V inverter hardware engineering task.

Read the applicable Siemens instructions before work. Verify 6SE7035-1EJ84-1JC2 and the installed-system configuration.

Verify the complete 6SE7035-1EJ84-1JC2 marking and its documented SIMOVERT MASTERDRIVES 380-460 V inverter hardware position before field work.

Place the connected equipment in the approved maintenance state before removing 6SE7035-1EJ84-1JC2.

Isolate every applicable power, signal and stored-energy source, then prove a safe state at 6SE7035-1EJ84-1JC2.

Record the installed connectors, terminals, jumpers and channel or node assignments before disconnection.

Use ESD controls and protect keyed interfaces, edge connectors and exposed electronic assemblies.

Restore only the approved SIMOVERT MASTERDRIVES 380-460 V inverter hardware hardware arrangement and configuration after replacement.

Energize 6SE7035-1EJ84-1JC2 in the documented sequence and review local, host and network diagnostics.

Prove the intended controlled function and retain the final acceptance record before production release.

FAQS

How should power be isolated for 6SE7035-1EJ84-1JC2?

Follow the equipment-specific isolation procedure, remove applicable control and field energy, discharge stored energy and prove the required safe state before touching the module.
Which configuration should be restored after replacing 6SE7035-1EJ84-1JC2?

Restore only the approved project, parameters, addresses and channel assignments retained from the installed system record; do not copy settings from a different catalog number.
How should engineers commission 6SE7035-1EJ84-1JC2?

Energize in the documented sequence, review device and host diagnostics, test the intended input, output or communication path under controlled conditions and retain the results.
Can 6SE7035-1EJ84-1JC2 be replaced by a visually similar module?

A substitute requires an explicit manufacturer-supported match for the complete 6SE7035-1EJ84-1JC2 catalog identity, host platform, interface, ratings and configuration.
What maintenance evidence should be retained for 6SE7035-1EJ84-1JC2?

Keep the as-found connection record, installed position, software or parameter revision, diagnostic state and signed functional-test result.
What system function does 6SE7035-1EJ84-1JC2 provide?

6SE7035-1EJ84-1JC2 is the simovert masterdrives igd7 inverter gating module used in the documented SIMOVERT MASTERDRIVES 380-460 V inverter hardware arrangement. It controls the inverter gate signals in the documented 510 A SIMOVERT MASTERDRIVES power unit.
Which host hardware must be checked before installing 6SE7035-1EJ84-1JC2?

Confirm the exact SIMOVERT MASTERDRIVES 380-460 V inverter hardware host, assigned position, mating connectors and companion hardware against the controlling manufacturer record for 6SE7035-1EJ84-1JC2.
What wiring or connector record is required before replacing 6SE7035-1EJ84-1JC2?

Record every connector identifier, terminal, conductor, polarity, shield, jumper and channel or node assignment before removal.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

6SE7035-1EJ84-1JC2

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 6SE7035-1EJ84-1JC2

Technical specifications for 6SE7035-1EJ84-1JC2

Information

Information