Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for RD63F200
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for RD63F200
-
Manufacturer:Siemens
-
Product Category:General Automation
-
Spare Part Number:RD63F200
-
Estimated shipping dimensions:23x20.5x41cm
-
Weight:20.86 kg
-
Tariff Code:8537101190
-
Counliy of origin:Mexico
-
Product type:RD6 frame only
-
Poles:3
-
Frame rating row:2000 A at 40 degrees C
-
AC rating:600 V AC
-
DC application table:250-500 V DC
-
Trip construction:Interchangeable
-
Matching unassembled breaker:RD63B200
-
Matching trip unit:RD63T200
-
Mounting assemblies:MB9301 or MBR9302
-
Terminal lugs:TC5R600, six required
-
Lug conductor range:300-600 kcmil copper only
-
Cables per connector:1-5
-
Interrupting rating, 240 V AC:65 kA
-
Interrupting rating, 480 V AC:50 kA
-
Interrupting rating, 600 V AC:25 kA
-
Interrupting rating, 250 V DC:30 kA, two-pole arrangement
-
Interrupting rating, 500 V DC:25 kA, three-pole arrangement
Information
Overview
Manuals
Common Applications
Product Precautions
In an RD6 distribution assembly, Siemens RD63F200 provides the frame for the 600 V AC interchangeable-trip breaker architecture; selection depends on the matching 2000 A trip, mounting base and conductor terminals.
- US2:RD63F200
- RD6 frame only
- 3
- 2000 A at 40 degrees C
Retain the exact installed identity, companion hardware and configuration record. Verify frame support for a matched three-pole RD6 protection assembly under controlled conditions before release.
Important Notice: Match RD63F200 to every retained connection, setting and acceptance result before replacement.
Siemens RD63F200 Manuals & Downloads
Siemens RD63F200 Technical Reference (PDF)Siemens RD63F200 Installation & Commissioning Guide (PDF)
The technical reference consolidates the exact frame, trip, mounting, lug and interrupting data; the field guide independently organizes safe isolation, assembly matching and acceptance checks.
RD6 frame service
Restores the documented frame position in an existing 2000 A RD6 breaker assembly.
Three-pole AC distribution
Supports the matched 600 V AC three-pole assembly when the retained trip and terminals are correct.
Documented DC arrangements
Applies only to the stated two-pole 250 V DC or three-pole 500 V DC connection arrangement.
Front or rear mounting
Uses the specified MB9301 or MBR9302 mounting assembly with the recorded conductor access.
Apply these checks to the exact Siemens RD63F200 installation before returning the affected equipment to service.
1
Confirm the complete RD63F200 frame identity and the installed RD6 three-pole assembly before work.
2
De-energize, lock out and prove every source and load conductor safe before opening the breaker assembly.
3
Match the RD63T200 trip unit and its 2000 A setting range to the retained protection study and coordination record.
4
Restore the specified MB9301 or MBR9302 mounting assembly without changing the documented access arrangement.
5
Install six TC5R600 lugs and accept only the documented 300-600 kcmil copper conductor range and cable count.
6
Verify that available fault current does not exceed the documented interrupting rating at the actual system voltage.
7
Use only the documented two-pole 250 V DC or three-pole 500 V DC arrangement when the application is direct current.
8
Complete mechanical, insulation, trip, contact and controlled energization checks before returning the breaker to service.
Technical notes
Match RD63F200 to the complete installed record. Preserve the host position, connections, settings and companion hardware; after replacement, verify frame support for a matched three-pole RD6 protection assembly under controlled conditions.
FAQ View All FAQ
-
What does Siemens RD63F200 supply within an RD6 breaker assembly?It supplies the three-pole RD6 frame; the matching trip unit, mounting assembly and terminal lugs are selected separately.
-
Which trip unit is matched to Siemens RD63F200 in the 2000 A row?The documented matching trip unit is RD63T200.
-
Which mounting assemblies are listed for Siemens RD63F200?The documented mounting choices are MB9301 and MBR9302.
-
Which terminal lugs are required for Siemens RD63F200?Six TC5R600 lugs are listed for the three-pole frame arrangement.
-
What conductor range is documented for the Siemens RD63F200 lug set?TC5R600 accepts one to five copper conductors per connector in the 300-600 kcmil range.
-
What interrupting rating applies to Siemens RD63F200 at 600 V AC?The documented RD6 interrupting rating at 600 V AC is 25 kA.
-
How may Siemens RD63F200 be applied in a DC system?Use only the documented 250 V DC two-pole or 500 V DC three-pole arrangement and verify the corresponding interrupting rating.
-
What must be verified before releasing Siemens RD63F200 to service?Verify frame, trip, mounting, lugs, conductor arrangement, fault-current duty and the complete mechanical and trip acceptance record.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.