Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6SE7038-6EK84-1JC2
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6SE7038-6EK84-1JC2
-
Manufacturer:Siemens
-
Product Category:General Automation
-
Spare Part Number:6SE7038-6EK84-1JC2
-
Estimated shipping dimensions:34.3x10x3.5cm
-
Weight:0.2 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Module type:IGD8 inverter control module
-
DC device range:510 to 620 V DC
-
Documented current class:860 A
Information
Overview
Manuals
Common Applications
Product Precautions
6SE7038-6EK84-1JC2 provides the documented IGD8 inverter-control module for the documented DC-link drive execution for a matched SIMOVERT MASTERDRIVES installation.
- Provides the documented IGD8 inverter-control module for the documented DC-link drive execution
- Uses exact article identity 6SE7038-6EK84-1JC2 for replacement control
- Integrates with the matched SIMOVERT MASTERDRIVES hardware
- Supports controlled diagnostics and functional verification after installation
The component is used with the exact host, connectors, power interfaces and configuration identified for 6SE7038-6EK84-1JC2. Commissioning preserves the installed architecture and verifies controlled drive response.
Important Notice: Confirm 6SE7038-6EK84-1JC2, SIMOVERT MASTERDRIVES host, hardware revision, connectors and terminals, power class, feedback or fieldbus options, grounding, cooling, firmware or parameter set, accessories and controlled commissioning results before service release.
Apter Power 6SE7038-6EK84-1JC2 Manuals and Guides
- Apter Power 6SE7038-6EK84-1JC2 SIMOVERT MASTERDRIVES IGD8 Inverter Control Module Technical Reference PDF
- Apter Power 6SE7038-6EK84-1JC2 Installation, Connection and Verification Workbook PDF
The first document is the model-specific technical and system reference. The second is a distinct field workbook for installation, wiring, commissioning and acceptance records.
SIMOVERT MASTERDRIVES planned maintenance
Restores the documented IGD8 inverter-control module for the documented DC-link drive execution during a controlled cabinet service.
SIMOVERT MASTERDRIVES IGD8 Inverter Control Module replacement
Uses the exact 6SE7038-6EK84-1JC2 identity to avoid an adjacent hardware execution.
Drive-system refurbishment
Preserves the recorded power, control, communication and protective-earth arrangement.
Controlled recommissioning
Confirms diagnostics and the affected drive function before automatic operation.
Read the applicable Siemens installation instructions before work. Verify 6SE7038-6EK84-1JC2, the installed host system and all configured field interfaces before isolation, wiring or commissioning.
1
Confirm the complete 6SE7038-6EK84-1JC2 marking and the installed SIMOVERT MASTERDRIVES position.
2
Place the driven machine and associated process in the approved maintenance state.
3
Isolate incoming power, prove stored DC-link energy discharged and use ESD controls.
4
Record every power, control, feedback, communication and protective-earth connection before removal.
5
Verify the installed host hardware and all values documented for 6SE7038-6EK84-1JC2 against the official source.
6
Restore the approved hardware execution, connector arrangement and project or parameter record.
7
Energize in the prescribed sequence and review drive, board and communication diagnostics.
8
Complete a controlled no-load or safe-point functional test before returning the machine to service.
Technical notes
Install 6SE7038-6EK84-1JC2 only in the documented SIMOVERT MASTERDRIVES position. Preserve the as-found wiring, hardware revision and configuration, then verify diagnostics and the affected IGD8 inverter-control module for the documented DC-link drive execution under controlled conditions.
FAQ View All FAQ
-
How is 6SE7038-6EK84-1JC2 identified?Match the complete article number, SIMOVERT MASTERDRIVES IGD8 Inverter Control Module designation and IGD8 inverter control module.
-
Which host is required for 6SE7038-6EK84-1JC2?Use only the documented SIMOVERT MASTERDRIVES execution with matching interfaces.
-
What records are retained before removing 6SE7038-6EK84-1JC2?Record power, control, feedback, communication and PE connections.
-
How is 6SE7038-6EK84-1JC2 isolated safely?Secure the machine, isolate supplies, prove the DC link discharged and use ESD controls.
-
Which official values govern 6SE7038-6EK84-1JC2?Module type: IGD8 inverter control module; DC device range: 510 to 620 V DC; Documented current class: 860 A.
-
How is 6SE7038-6EK84-1JC2 configuration restored?Restore the approved hardware execution, connectors and parameter or project record.
-
Which diagnostics follow 6SE7038-6EK84-1JC2 energization?Review drive, board and communication diagnostics in the prescribed startup sequence.
-
What releases 6SE7038-6EK84-1JC2 to service?A controlled safe-point functional test with the expected drive response.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.