The Siemens 6ES7288-1CR30-0AA1 is a SIMATIC S7-200 SMART CR30s compact CPU with 18 integrated 24 V DC digital inputs, 12 relay outputs, and 20 KB of program/data memory.
- CPU CR30s
- 18 DI 24 V DC; 12 relay DO
- 85 to 264 V AC at 47 to 63 Hz
- 20 KB program/data memory
It executes the STEP 7 Micro/WIN SMART user program, reads the 18 onboard binary input signals, and commands 12 field outputs for compact relay logic with thirty onboard I/O points and serial communication. Its relay channels switch approved AC or DC loads within the published contact limits. The compact CRs design uses integrated RS485 communication and fixed onboard I/O. It is suited to small conveyors and machine-sequence control.
Important Notice: Use the complete 6ES7288-1CR30-0AA1 code and verify the physical nameplate, firmware, project, accessories, and current Siemens documentation before installation or replacement.
Apter Power 6ES7288-1CR30-0AA1 Manuals and Guides
Important Notice: These are two separate Apter Power documents prepared from the manufacturer-published Siemens information named in each document. Confirm the physical nameplate, current Siemens documents, and host-system requirements before installation or replacement.
Standalone machine logic
Controls small conveyors and machine-sequence control with 18 inputs and 12 relay outputs
Contact-based load switching
Commands approved contactors, valves, indicators, and interposing relays
Serial equipment coordination
Uses the integrated RS485 interface for supported device communication
Fixed-I/O control panels
Provides a compact 30-point CPU where onboard I/O meets the design
Read the exact Siemens S7-200 SMART documentation before use. Verify 6ES7288-1CR30-0AA1, CPU CR30s, power, I/O wiring, firmware, and project from the physical installation.
1
Identity: Match the complete 6ES7288-1CR30-0AA1 MLFB, CPU CR30s marking, hardware, and firmware
2
Power: Verify 85 to 264 V AC at 47 to 63 Hz and isolate all sources before wiring or removal
3
I/O: Observe every channel voltage, current, group common, polarity, and protective-device limit
4
Project: Back up and match the STEP 7 Micro/WIN SMART configuration, addresses, communications, and retentive data
5
Panel: Use DIN-rail mounting, protective earth, segregation, ventilation, and orientation limits from Siemens
Videos
News
Applications
