Product image is representative; revision or series may vary. Contact us to request a specific version.
Product Describe:
Siemens 6AV2124-1MC01-0AX0 exchanges data through PROFINET or MPI/PROFIBUS DP and runs the project engineered for the connected controller and machine.
The Siemens 6AV2124-1MC01-0AX0 is a SIMATIC HMI KP1200 Comfort key panel with a 12.1-inch widescreen display. It presents process graphics, alarms, trends, and operating data while providing dedicated illuminated function keys for machine control.
KP1200 Comfort
12.1-inch widescreen TFT
1280 x 800 pixels
16.7 million
The panel exchanges data through PROFINET or MPI/PROFIBUS DP and runs the project engineered for the connected controller and machine.
Important Notice: Use the complete 6AV2124-1MC01-0AX0 code and verify the physical nameplate and current Siemens documentation before installation or replacement.
Important Notice: These are two separate Apter Power documents prepared from the manufacturer-published Siemens information named in each document. Confirm the physical nameplate, current Siemens documents, and host-system requirements before installation or replacement.
Operator stations
Combine wide-screen visualization with dedicated keys.
Production machinery
Present alarms and commands at the machine.
Process skids
Connect to the controller over PROFINET or PROFIBUS.
Read and follow the exact Siemens documentation and host-equipment instructions before use. Verify 6AV2124-1MC01-0AX0 from the physical nameplate.
1
Back up the HMI project and recipes
2
Record network name, IP address, and bus parameters
3
Confirm cabinet cutout and environmental sealing
4
Verify TIA Portal compatibility
5
Restore only a project intended for KP1200 Comfort
Use the complete 6AV2124-1MC01-0AX0 identifier. Confirm the current lifecycle phase and firmware support with Siemens using the full article number. Values not published in the cited Siemens source are intentionally not inferred.
The Siemens 6AV2124-1MC01-0AX0 is a SIMATIC HMI KP1200 Comfort key panel with a 12.1-inch widescreen display. It presents process graphics, alarms, trends, and operating data while providing dedicated illuminated function keys for machine control.
What is the specific function of 6AV2124-1MC01-0AX0?
The panel exchanges data through PROFINET or MPI/PROFIBUS DP and runs the project engineered for the connected controller and machine.
Which signals, power, or data does 6AV2124-1MC01-0AX0 handle?
6AV2124-1MC01-0AX0 belongs to the SIMATIC HMI Comfort context described in the cited Siemens source.
Which components are compatible with 6AV2124-1MC01-0AX0?
TIA Portal / WinCC project created for KP1200 Comfort PLC connection over configured PROFINET or MPI/PROFIBUS DP Cabinet cutout, 24 V supply, and accessories specified for the panel
Where is 6AV2124-1MC01-0AX0 applied?
Operator stations: Combine wide-screen visualization with dedicated keys. Production machinery: Present alarms and commands at the machine. Process skids: Connect to the controller over PROFINET or PROFIBUS.
What is the lifecycle status of 6AV2124-1MC01-0AX0?
Confirm the current lifecycle phase and firmware support with Siemens using the full article number.
What must be checked before installing 6AV2124-1MC01-0AX0?
Back up the HMI project and recipes Record network name, IP address, and bus parameters Confirm cabinet cutout and environmental sealing Verify TIA Portal compatibility Restore only a project intended for KP1200 Comfort
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.