The T9851 is an ICS Triplex AADvance 8-Channel Digital Output Termination Assembly for AADvance systems.
- 8 field output connections; one supported I/O module
- Designed for the AADvance architecture
- terminates eight 24 Vdc digital output field circuits and routes them between the matched output module and final elements
- Model-specific compatible hardware: T9451 digital output module, T9300 I/O base unit, approved field supply and AADvance Workbench configuration
It terminates eight 24 Vdc digital output field circuits and routes them between the matched output module and final elements. It handles eight 24 Vdc digital output channels in a simplex/commoned termination arrangement and works with T9451 digital output module, T9300 I/O base unit, approved field supply and AADvance Workbench configuration. For dependable operation, follow the official model-specific system matching, wiring, environmental and commissioning instructions.
Important Notice: Confirm the exact T9851 physical nameplate, hardware revision and controlled project record before installation or replacement.
Apter Power T9851 Manuals and Guides
Important Notice: These are two separate Apter Power documents with different layouts and model-specific content, prepared from the manufacturer-published source identified in each document. Confirm the physical nameplate, current Rockwell Automation documentation, and host-system requirements before installation or replacement.
Shutdown solenoid termination
T9851 terminates eight 24 Vdc digital output field circuits and routes them between the matched output module and final elements.
Trip relay outputs
T9851 eight 24 Vdc digital output channels in a simplex/commoned termination arrangement.
Alarm and beacon circuits
T9851 terminates eight 24 Vdc digital output field circuits and routes them between the matched output module and final elements.
Package safety outputs
T9851 eight 24 Vdc digital output channels in a simplex/commoned termination arrangement.
Eight-channel final-element groups
T9851 terminates eight 24 Vdc digital output field circuits and routes them between the matched output module and final elements.
Read Rockwell Automation AADvance Controller Solutions Handbook and the applicable system installation instructions before use. Verify the exact model, revision, slot or base, termination hardware and field wiring.
1
Match the T9851 termination assembly to the engineered T9451 simplex/commoned channel arrangement.
2
Isolate field power and verify polarity before landing output conductors.
3
Use conductor sizes and strip length stated in the AADvance handbook.
4
Check the field-supply fuse and final-element current against the approved loop design.
5
Perform channel-by-channel functional tests, prove the fail-safe state and record the result before service.
Videos
News
Applications
