Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for CC-PAON01
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for CC-PAON01
-
Manufacturer:Honeywell
-
Product Category:DCS Systems
-
Spare Part Number:51410070-176
-
Estimated shipping dimensions:14.5x5.5x14.5cm
-
Weight:0.3 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Output channels:16
-
Output signal:4 to 20 mA
-
Communication:Non-HART
-
Conversion:16-bit
-
Module type:Analog output
Information
Overview
Manuals
Common Applications
Product Precautions
Honeywell CC-PAON01 is a 16-channel non-HART analog-output module that generates 4-20 mA control signals for field actuators.
- Generates sixteen analog control outputs
- Drives standard current-loop final elements
- Reports channel diagnostics
- Interfaces with the matched Series C IOTA
CC-PAON01 operates with Matched analog-output IOTA, Series C carrier, 4-20 mA field loops, Controller output database.
Its engineered use includes Control-valve positioning, Variable-speed drive references, Damper command loops, Chemical dosing setpoints.
Important Notice: Confirm the complete CC-PAON01 marking, installed-system configuration, field connections and controlled functional test before commissioning or replacement.
Apter Power CC-PAON01 Manuals and Guides
Apter Power CC-PAON01 Product Technical Reference PDFHoneywell CC-PAON01 Official Technical Manual PDF
The first document is an Apter Power model-specific technical reference. The second supports installation, configuration and engineering verification for CC-PAON01.
Control-valve positioningGenerates sixteen analog control outputs
Variable-speed drive referencesDrives standard current-loop final elements
Damper command loopsReports channel diagnostics
Chemical dosing setpointsInterfaces with the matched Series C IOTA
Read the applicable Honeywell instructions before work. Verify CC-PAON01 and the installed Experion Series C I/O configuration.
1Verify the complete CC-PAON01 marking and its assigned Experion Series C I/O position before work.
2Isolate the applicable power and field energy before disconnecting CC-PAON01.
3Protect CC-PAON01 connectors and electronic assemblies with approved ESD controls.
4Record the installed wiring, channel assignment and configuration before replacement.
5Match Matched analog-output IOTA and Series C carrier to the documented system arrangement.
6Commission CC-PAON01 with controlled status, signal and diagnostic checks.
7Retain the final control-valve positioning functional-test result in the maintenance record.
Technical notes
Place final elements in a controlled state, verify loop polarity and prove output direction at a low-risk command value.
FAQ View All FAQ
-
Does CC-PAON01 match Matched analog-output IOTA in a Control-valve positioning installation?Verify the complete CC-PAON01 marking, the documented Experion Series C I/O position and the installed Matched analog-output IOTA before fitting the assembly.
-
How should CC-PAON01 be wired when it must generates sixteen analog control outputs?Isolate the circuit, identify every terminal and reproduce the approved polarity, shield and channel assignment for CC-PAON01; then continuity-test the affected path.
-
Which Experion Series C I/O records should be captured before removing CC-PAON01?Record the as-found wiring, installed position, active configuration and diagnostic state associated with CC-PAON01 before disconnection.
-
What controlled test confirms that CC-PAON01 can drives standard current-loop final elements?Apply the approved field or simulated stimulus, observe the Experion Series C I/O indication and confirm the intended response without bypassing the normal interlocks.
-
Which Series C carrier condition should be checked when CC-PAON01 reports an abnormal state?Check the Series C carrier supply, seating and connection first, then compare channel diagnostics with the recorded CC-PAON01 baseline.
-
Can CC-PAON01 be moved directly into Variable-speed drive references without validating Controller output database?No. Confirm the Controller output database, revision, connection scheme and Experion Series C I/O configuration before transferring CC-PAON01 to that duty.
-
What maintenance evidence is required after CC-PAON01 is used for Damper command loops?Retain the nameplate record, corrective action, final diagnostics and a controlled damper command loops functional-test result for CC-PAON01.
-
How should CC-PAON01 be returned to service in Chemical dosing setpoints?Restore power under control, verify reports channel diagnostics, exercise the intended signal path and release CC-PAON01 only after the Experion Series C I/O remains in its approved operating state.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.