What exact Honeywell system position is intended for CC-PAIH01?

CC-PAIH01 is assigned to the documented Experion Series-C I/O role as high-level analog input module with hart; confirm that role against the installed cabinet record.

Which field signal or controlled function is handled by CC-PAIH01?

Its documented signal duty is high-level analog current/voltage inputs plus hart digital communication. The controlling source lists channels as 16; 12 single-ended / 4 differential.

Which companion hardware must be checked before installing CC-PAIH01?

Match CC-PAIH01 with CC-TAIX01 or redundant CC-TAIX11 IOTA and HART or conventional transmitters; also retain the approved carrier, cable and project identity.

What electrical limit should an engineer verify before wiring CC-PAIH01?

Verify the model-specific value for A/D resolution: 16 bit. Do not transfer a limit from another module revision.

How should the installed configuration be preserved when replacing CC-PAIH01?

Record the as-found slot, connector, channel assignment and project revision, then restore only the approved Experion Series-C I/O configuration.

Which isolation or handling check applies to CC-PAIH01?

Apply the isolation and ESD sequence stated for CC-PAIH01; the source also identifies cmrr as 70 dB, dc to 60 Hz.

What diagnostic or commissioning evidence is required for CC-PAIH01?

Complete the model-specific functional check for hart pressure-transmitter integration, review host diagnostics and retain the final test result.

Can CC-PAIH01 be substituted for a visually similar Honeywell assembly?

No automatic substitution is assumed. Compare the complete CC-PAIH01 marking, input type, companion hardware, signal duty and approved system revision.

Honeywell CC-PAIH01 High-Level Analog Input Module with HART

Name: CC-PAIH01
Brand: Honeywell
SKU: CC-PAIH01

CC-PAIH01

High-Level Analog Input Module with HART

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for CC-PAIH01

Manufacturer:

Honeywell

Product Category:

DCS System

Spare Part Number:

CC-PAIH01

Estimated shipping dimensions:

15.8x5.7x14.6cm

Weight:

0.4 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Input type:

Voltage or current; 2-wire or self-powered transmitters

Channels:

16; 12 single-ended / 4 differential

Voltage-input channels:

13 to 16

A/D resolution:

16 bit

Ranges:

0-5 V; 1-5 V; 0.4-2 V; 4-20 mA through 250 Ohm

CMRR:

70 dB, dc to 60 Hz

Common-mode voltage:

-6 to +5 V peak

NMRR:

19 dB at 60 Hz

Input filter:

Single pole; -3 dB at 6.5 Hz

Maximum differential input:

+/-30 V

Crosstalk:

-60 dB

Powered input impedance:

>10 MOhm

Scan period:

50 ms

Accuracy at 23.5 +/-2 degC:

+/-0.075% FS

Accuracy at 0 to 60 degC:

+/-0.15% FS

Compatible IOTAs:

CC-TAIX01; CC-TAIX11 redundant

Information

Overview Manuals Common Applications Product Precautions

Honeywell CC-PAIH01 is high-level analog input module with hart. It acquires high-level analog process values and HART device data for Experion Series-C control and asset diagnostics.

Processes sixteen high-level analog channels
Supports HART communication with connected field devices
Provides four differential voltage-input positions
Offers open-wire detection and loop diagnostics

CC-PAIH01 operates with CC-TAIX01 or redundant CC-TAIX11 IOTA, HART or conventional transmitters, Series-C carrier, Experion control and asset configuration.

Engineered applications include HART pressure-transmitter integration, Multivariable flow measurement, Process analog acquisition, Redundant analog-input renewal.

Important Notice: Confirm the CC-TAIX01/CC-TAIX11 arrangement, IOTA jumpers, voltage-channel allocation, loop power and HART device identity before scanning and diagnostics.

Apter Power CC-PAIH01 Manuals and Guides

Apter Power CC-PAIH01 Product and System Technical Reference PDF Apter Power CC-PAIH01 Field Installation and Functional Acceptance Workbook PDF

The first document organizes model-specific identity, technical data and system context. The second provides a separate installation, connection, commissioning and acceptance workflow.

HART pressure-transmitter integration

Collects process variables and device-status data from HART transmitters.

Multivariable flow measurement

Brings multiple variables from supported field instruments into Experion.

Process analog acquisition

Conditions conventional voltage or current signals for control strategies.

Redundant analog-input renewal

Restores input hardware while retaining HART addressing and channel ranges.

Read the applicable Honeywell instructions before work. Verify CC-PAIH01 and the installed Experion Series-C I/O configuration.

Verify the complete CC-PAIH01 marking and its assigned HART high-level analog-input position before work.

Place the connected process and control strategy in the approved maintenance state.

Isolate the applicable cabinet supply and analog and HART field energy before disconnecting conductors.

Record terminal numbers, channel assignments, polarity, shields and configured ranges before removal.

Use ESD controls and protect the backplane connector, terminal hardware and coated electronics.

Confirm the installed CC-TAIX01 or CC-TAIX11 IOTA and carrier arrangement against the approved project.

Restore power in a controlled sequence and clear only diagnostics created by the maintenance activity.

Complete analog scaling, open-wire and HART communication checks and retain the measured result before returning the channel to automatic service.

FAQS

What exact Honeywell system position is intended for CC-PAIH01?

CC-PAIH01 is assigned to the documented Experion Series-C I/O role as high-level analog input module with hart; confirm that role against the installed cabinet record.
Which field signal or controlled function is handled by CC-PAIH01?

Its documented signal duty is high-level analog current/voltage inputs plus hart digital communication. The controlling source lists channels as 16; 12 single-ended / 4 differential.
Which companion hardware must be checked before installing CC-PAIH01?

Match CC-PAIH01 with CC-TAIX01 or redundant CC-TAIX11 IOTA and HART or conventional transmitters; also retain the approved carrier, cable and project identity.
What electrical limit should an engineer verify before wiring CC-PAIH01?

Verify the model-specific value for A/D resolution: 16 bit. Do not transfer a limit from another module revision.
How should the installed configuration be preserved when replacing CC-PAIH01?

Record the as-found slot, connector, channel assignment and project revision, then restore only the approved Experion Series-C I/O configuration.
Which isolation or handling check applies to CC-PAIH01?

Apply the isolation and ESD sequence stated for CC-PAIH01; the source also identifies cmrr as 70 dB, dc to 60 Hz.
What diagnostic or commissioning evidence is required for CC-PAIH01?

Complete the model-specific functional check for hart pressure-transmitter integration, review host diagnostics and retain the final test result.
Can CC-PAIH01 be substituted for a visually similar Honeywell assembly?

No automatic substitution is assumed. Compare the complete CC-PAIH01 marking, input type, companion hardware, signal duty and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

CC-PAIH01

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for CC-PAIH01

Technical specifications for CC-PAIH01

Information