Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 942-M0A-2D-1G1-220S
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 942-M0A-2D-1G1-220S
-
Manufacturer:Honeywell
-
Product Category:DCS Systems
-
Spare Part Number:942-M0A-2D-1G1-220S
-
Estimated shipping dimensions:10x11x7.5cm
-
Weight:0.32 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Series:942 ultrasonic sensing
-
Scan distance:1,500 mm
-
Analog outputs:0-10 VDC and 4-20 mA
-
Switching outputs:Two PNP outputs
-
Sensor head:Use with the specified 942 or 947 head
-
Max Switching Frequency:8 Hz
Information
Overview
Manuals
Common Applications
Product Precautions
Honeywell 942-M0A-2D-1G1-220S is a Series 942 ultrasonic sensor control amplifier with analog, switching and digital outputs.
- Series: 942 ultrasonic sensing
- Scan distance: 1,500 mm
- Analog outputs: 0-10 VDC and 4-20 mA
- Switching outputs: Two PNP outputs
Use 942-M0A-2D-1G1-220S only with the exact host, rack or chassis, terminal hardware, cable and project configuration specified for the installed system.
Confirm the complete physical label, host system, terminal hardware, cable and project documentation before installation or replacement.
Apter Power 942-M0A-2D-1G1-220S Manuals and Guides
- 942-M0A-2D-1G1-220S Product Parameters PDF
- Apter Power 942-M0A-2D-1G1-220S Product Information Manual
Important Notice: The first link is the model-specific product-parameters PDF prepared from the directly relevant product evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current Honeywell documents, and host-system requirements before installation or replacement.
Installed-base maintenance
Supports identification and maintenance planning for Honeywell 942-M0A-2D-1G1-220S.
Compatibility review
Compares the exact hardware, host, rack or chassis, terminal assembly, cable and revision before replacement.
Installation planning
Defines the isolation, mounting, wiring and configuration checks required before field work.
Commissioning and troubleshooting
Supports controlled power, communication, channel, diagnostic and alarm checks after work.
Read the exact product and installed-system instructions before work. Verify the complete physical label and configuration.
1
Verify the complete Honeywell 942-M0A-2D-1G1-220S physical label before use.
2
Use 942-M0A-2D-1G1-220S only with the exact host, rack or chassis, terminal hardware, cable and project configuration specified for the installed system.
3
Confirm the exact rack or chassis position, terminal assembly, cable, connector, power and project revision.
4
De-energize the equipment unless the exact hardware manual and site procedure explicitly permit energized service.
5
Back up controller, communication and I/O configuration before replacement or migration work.
6
Do not transfer electrical, communication or mechanical values from a related model or different suffix.
7
Follow ESD controls and protect connectors, terminals and field wiring during handling.
8
Perform documented visual, wiring, power, communication, channel, diagnostic and fail-state checks after installation.
Alternative Names
942-M0A-2D-1G1-220S
Technical notes
Use 942-M0A-2D-1G1-220S only with the exact host, rack or chassis, terminal hardware, cable and project configuration specified for the installed system. Lifecycle evidence boundary: Use the cited model-level lifecycle statement where supplied.
FAQ View All FAQ
-
How do I confirm compatibility with the installed system?Match the complete model and part number, host system, rack or chassis, terminal assembly, cable, firmware and project documentation.
-
What should be checked before ordering a replacement?Provide clear nameplate photos and verify the installed slot, connector, terminal hardware, field wiring and required revision.
-
Can a similar Honeywell or related model be used as a direct replacement?Only when the manufacturer documentation and the installed project explicitly approve that exact substitution.
-
What must be checked before installation?Confirm isolation, power, keying, mounting, connector orientation, cable code, wiring polarity and the latest configuration backup.
-
Can the product be installed or removed while energized?Follow the exact hardware manual and site procedure; otherwise de-energize the circuit before handling the hardware or field wiring.
-
How should wiring and termination be verified?Compare every conductor, shield, polarity, terminal number and field supply with the approved drawings before moving any wire.
-
What commissioning checks are recommended?Check power, communications, channels, diagnostics, alarms, configured safe states and the intended process response before return to service.
-
What should be recorded during troubleshooting?Record indicators, diagnostics, channel values, alarms, field measurements, wiring checks and the exact sequence that produced the fault.
-
How should a spare be stored?Keep the unit in protective packaging under the environmental and ESD conditions specified for the product family, with its label and inspection history attached.
-
What information should be included in an RFQ?Include the complete model, part number, revision, quantity, host system, current hardware photos and any required certification or coating.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.