Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for SSD-D08G-4300-51403645-400
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for SSD-D08G-4300-51403645-400
-
Manufacturer:Honeywell
-
Product Category:DCS Systems
-
Spare Part Number:SSD-D08G-4300 51403645-400
-
Estimated shipping dimensions:13.4x8.5x1.5cm
-
Weight:0.18 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Assembly type:SBHM drive assembly
-
Assembly number:51403645-400
-
Installed drive model:SSD-D08G-4300
-
Drive family:SiliconDrive II
-
Storage medium:Solid-state drive
-
Capacity:8 GB
-
Interface:PATA
-
Host connection:44-pin IDE/PATA
-
Device selection:Master or Slave
-
Capacity code:08G
-
Series code:4300
-
Assembly construction:Drive mounted on a carrier PCB with retention hardware
Information
Overview
Manuals
Common Applications
Product Precautions
Within an installed SBHM node, Honeywell SSD-D08G-4300-51403645-400 occupies the removable storage position and couples the labeled PATA drive to the host connector through its carrier PCB.
- 8 GB solid-state storage
- Parallel ATA interface
- SiliconDrive II device family
- Carrier marked 51403645-400
The storage path advances from the SBHM host through the carrier connector and PCB to the PATA interface and solid-state media.
Important Notice: Confirm the SSD-D08G-4300 drive identity, 51403645-400 carrier number, device-selection position, connector condition, and retained data before service.
Honeywell SSD-D08G-4300-51403645-400 Manuals & Downloads
SSD-D08G-4300-51403645-400 Technical Reference (PDF)SSD-D08G-4300-51403645-400 Installation & Commissioning Guide (PDF)
The Technical Reference presents assembly identity, storage architecture, interfaces, and technical data; the Installation & Commissioning Guide organizes isolation, data protection, physical exchange, and functional acceptance.
SBHM storage replacement
Restores the removable solid-state storage assembly in an installed SBHM configuration.
History-node maintenance
Supports controlled service of the storage element used by the Single Board History Module.
Data-preserving replacement
Allows engineers to plan backup, identity matching, and restore checks before exchanging the assembly.
Legacy spare verification
Provides a physical part-number, capacity, interface, and jumper baseline for an exact spare comparison.
Apply these controls to Honeywell SSD-D08G-4300-51403645-400 during isolation, data protection, removal, reconnection, power-up, and release.
1
Match both SSD-D08G-4300 and 51403645-400 before removing or installing the assembly.
2
Back up required history data and record the installed device state before isolating the host.
3
De-energize the host and use electrostatic-discharge protection when handling the exposed carrier PCB.
4
Record and restore the Master or Slave selection shown for the installed drive position.
5
Align the 44-pin PATA connector before insertion and stop if any contact is bent or displaced.
6
Keep the metal carrier, fasteners, and PCB orientation unchanged during replacement.
7
Do not substitute a different capacity, interface, or 4300-series suffix without an approved system review.
8
After installation, verify device recognition, stored-data access, and the host's normal history function before release.
Technical notes
Match both SSD-D08G-4300 and 51403645-400 before installation, then preserve the as-found Master/Slave selection and connector orientation. Verify host recognition, stored-data access and normal history operation before release.
FAQ View All FAQ
-
Which identifiers must match when replacing Honeywell SSD-D08G-4300-51403645-400?The drive label must show SSD-D08G-4300 and the carrier PCB must show assembly number 51403645-400.
-
What capacity is installed in Honeywell SSD-D08G-4300-51403645-400?The SiliconDrive II label identifies an 8 GB solid-state drive.
-
Which storage interface does Honeywell SSD-D08G-4300-51403645-400 use?The installed drive uses a Parallel ATA interface.
-
How is device selection set on Honeywell SSD-D08G-4300-51403645-400?The drive label provides Master and Slave selection positions that must match the installed host arrangement.
-
Why must the 51403645-400 number be checked on Honeywell SSD-D08G-4300-51403645-400?It identifies the carrier as the intended SBHM disk-drive assembly rather than only identifying the removable storage device.
-
What should be preserved before Honeywell SSD-D08G-4300-51403645-400 is removed?Preserve required data and record the host position, connector orientation, jumper selection, and as-found operating state.
-
Which connector inspection applies to Honeywell SSD-D08G-4300-51403645-400?Inspect the 44-pin IDE/PATA connection for alignment, bent contacts, contamination, and full seating before power is restored.
-
How should Honeywell SSD-D08G-4300-51403645-400 be accepted after installation?Confirm device recognition, expected 8 GB identity, stored-data access, and normal host history operation before return to service.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.