Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for IC697MDL240
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for IC697MDL240
-
Manufacturer:General Electric
-
Product Category:PLC Systems
-
Spare Part Number:IC697MDL240
-
Estimated shipping dimensions:4x21.8x29.3cm
-
Weight:0.62 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Product family:Series 90-70
-
Product type:Isolated AC input module
-
Input points:16
-
Nominal input voltage:120 VAC
-
Channel isolation:Individually isolated inputs
-
Signal type:Discrete AC input
-
Backplane interface:Series 90-70 rack
-
Field connection:Removable terminal board
-
Status indication:Individual input LEDs
-
Replacement requirement:Match voltage, slot and terminal assignment
Information
Overview
Manuals
Common Applications
Product Precautions
General Electric IC697MDL240 is a Series 90-70 discrete input module with sixteen individually isolated 120 VAC field-input channels.
- Sixteen individually isolated 120 VAC discrete input points.
- Independent field-channel references without a shared input common.
- Removable terminal-board connection for documented field wiring.
- Individual point indication for field-state and controller checks.
The module carries independent AC field states into the Series 90-70 backplane while preserving each channel reference. Commissioning compares field voltage, point indication and controller logic for all sixteen inputs.
Important Notice: Confirm IC697MDL240, every field-voltage source, terminal assignment, neutral route and controller point reference before release.
General Electric IC697MDL240 Manuals & Downloads
IC697MDL240 Technical Reference (PDF)IC697MDL240 Installation & Commissioning Guide (PDF)
The technical reference covers verified IC697MDL240 channel and isolation data; the installation guide organizes wiring, terminal checks and controlled input commissioning.
Isolated AC status sensing
Acquires sixteen independent 120 VAC field states without a shared channel common.
Motor-control feedback
Returns contactor, starter and auxiliary-contact status to a Series 90-70 controller.
Plant permissive circuits
Monitors discrete operating conditions used by documented permissive and interlock logic.
Legacy PLC maintenance
Restores an existing isolated-input position while preserving terminal and program references.
Read the applicable Series 90-70 input-module instructions before work. Verify IC697MDL240, all sixteen 120 VAC field circuits and the installed rack assignment before isolation.
1
Confirm the complete IC697MDL240 marking and installed slot.
2
Place every affected machine circuit in the approved maintenance state.
3
Record all terminal numbers, wire markers, voltage sources and PLC references.
4
Isolate rack power and every independent 120 VAC field source.
5
Prove each conductor de-energized before removing the terminal board.
6
Preserve the individual isolation and documented neutral arrangement.
7
Inspect terminal-board condition and tighten conductors to the approved value.
8
Test all sixteen inputs, diagnostics, alarms and interlocks before release.
Technical notes
IC697MDL240 provides sixteen individually isolated 120 VAC discrete inputs for Series 90-70 control systems. Its channels interface AC field states to the PLC backplane. Confirm the field-voltage class, terminal assignment, neutral arrangement, module slot and controller input references before installation, then test every channel and affected interlock.
FAQ View All FAQ
-
What input voltage does IC697MDL240 use?IC697MDL240 is designed for nominal 120 VAC discrete input circuits.
-
How many input points are on IC697MDL240?IC697MDL240 provides sixteen input points.
-
Are the IC697MDL240 inputs isolated?Yes. The sixteen input channels are individually isolated, so each field circuit must retain its documented wiring and reference.
-
What field devices can connect to IC697MDL240?Compatible 120 VAC switching devices may be used when their voltage, leakage current and installation design meet the module input requirements.
-
What should be documented before removing IC697MDL240?Record the rack slot, terminal numbers, wire markers, field-voltage source, neutral routing and controller point references.
-
Can IC697MDL240 be replaced with a grouped-input module?Not without engineering review. Individual channel isolation and terminal arrangements can differ from grouped-input designs.
-
What must be checked before energizing IC697MDL240?Verify channel-to-terminal continuity, conductor identification, insulation condition, terminal tightness and the expected 120 VAC source.
-
How should IC697MDL240 be commissioned?Energize under control, compare each input LED with the field state, confirm controller references and test every affected alarm or interlock.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.