Which station hardware must be paired with IC670MDL331?

Use IC670MDL331 with the documented Field Control terminal block, compatible BIU or MFP, and the installed four isolated 120 vac group supplies.

Which IC670MDL331 identity should be checked before installation?

Confirm the full IC670MDL331 catalog marking and the catalog number value IC670MDL331 against the installed station record.

Can IC670MDL331 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670MDL331, its terminal assignment, data allocation, signal type, power arrangement, and the documented biu current value 154 mA maximum before migration.

GE IC670MDL331 GE Fanuc eight-point 120 VAC isolated two-amp discrete output module

Name: IC670MDL331
Brand: General Electric
SKU: IC670MDL331

IC670MDL331

GE Fanuc eight-point 120 VAC isolated two-amp discrete output module

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for IC670MDL331

Manufacturer:

General Electric

Product Category:

PLC Systems

Spare Part Number:

IC670MDL331

Estimated shipping dimensions:

5.5x8.6x8.2cm

Weight:

0.22 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Output points:

Output grouping:

Four isolated groups of two

Rated voltage:

120 V AC

Output-voltage range:

85 to 132 V AC; 47 to 63 Hz

Maximum point current:

2 A

Maximum group current:

2 A

Maximum module current:

6 to 8 A with derating

Minimum load current:

10 mA per point

Inrush current:

20 A maximum for one 20 ms cycle

Output-voltage drop:

3.0 V maximum

Leakage current:

2 mA at 120 V AC

On response:

1 ms maximum

Off response:

One-half cycle maximum

BIU current:

154 mA maximum

Information

Overview Manuals Common Applications Product Precautions

GE IC670MDL331 is ge fanuc eight-point 120 vac isolated two-amp discrete output module. It switches eight 120 VAC loads in four isolated two-point groups and reports individual group fuse status.

Provides eight 120 VAC outputs
Separates outputs into four isolated pairs
Switches up to 2 A per point and per group
Uses a dedicated fuse-status indication for each group

IC670MDL331 operates with Four isolated 120 VAC group supplies, Eight pilot-duty AC loads, Field Control terminal block, Compatible BIU or MFP.

Engineered applications include isolated AC pilot-load switching field station, Remote I/O cabinet integration, Installed-base module renewal, Controlled commissioning and diagnostics.

Important Notice: Keep each two-point group supply isolated, respect the 2 A group limit and verify all four fuse-status circuits before enabling outputs.

Apter Power IC670MDL331 Manuals and Guides

Apter Power IC670MDL331 Technical Data and System Reference PDF IC670MDL331 Field Installation and Commissioning Workbook PDF

The first document presents model-specific technical data and system identity. The second provides a separate installation, wiring and commissioning workflow.

isolated AC pilot-load switching field station

Performs the documented isolated ac pilot-load switching function at a distributed Field Control station.

Remote I/O cabinet integration

Exchanges configured process data with the host through the installed bus interface.

Installed-base module renewal

Restores an exact catalog-number position while preserving terminal and data identity.

Controlled commissioning and diagnostics

Supports staged wiring, configuration, diagnostic and functional verification.

Read the applicable GE Fanuc Field Control instructions before work. Verify IC670MDL331, its terminal assignment and the installed station configuration.

Verify the complete IC670MDL331 catalog marking and assigned Field Control position before work.

Place the connected isolated AC pilot-load switching process in its approved maintenance state before disturbing the station.

Isolate BIU and field power, then confirm a safe condition at the IC670MDL331 terminal block.

Label and record individual point conductors, group commons and field-power feeds before disconnecting any conductor from IC670MDL331.

Use ESD controls and protect the module connector, terminal block keying and exposed electronics.

Restore only the documented input/output defaults, data reference and fault reporting; do not copy settings from an adjacent module.

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.

Complete point-by-point state, response-time and diagnostic checks and retain the final result before returning the process to service.

FAQS

What Field Control function is assigned to IC670MDL331?

IC670MDL331 is ge fanuc eight-point 120 vac isolated two-amp discrete output module. It switches eight 120 VAC loads in four isolated two-point groups and reports individual group fuse status.
Which station hardware must be paired with IC670MDL331?

Use IC670MDL331 with the documented Field Control terminal block, compatible BIU or MFP, and the installed four isolated 120 vac group supplies.
Which IC670MDL331 identity should be checked before installation?

Confirm the full IC670MDL331 catalog marking and the catalog number value IC670MDL331 against the installed station record.
How should field wiring be transferred when replacing IC670MDL331?

Label and record individual point conductors, group commons and field-power feeds before disconnecting any conductor from IC670MDL331.
Which configuration item is critical when commissioning IC670MDL331?

Restore only the documented input/output defaults, data reference and fault reporting; do not copy settings from an adjacent module.
What diagnostic checks apply to IC670MDL331?

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.
How should the IC670MDL331 signal path be functionally tested?

Complete point-by-point state, response-time and diagnostic checks and retain the final result before returning the process to service.
Can IC670MDL331 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670MDL331, its terminal assignment, data allocation, signal type, power arrangement, and the documented biu current value 154 mA maximum before migration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

IC670MDL331

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for IC670MDL331

Technical specifications for IC670MDL331

Information

Information