Which station hardware must be paired with IC670ALG240?

Use IC670ALG240 with the documented Field Control terminal block, compatible BIU or MFP, and the installed two-wire or three-wire transmitters.

Which IC670ALG240 identity should be checked before installation?

Confirm the full IC670ALG240 catalog marking and the catalog number value IC670ALG240 against the installed station record.

Can IC670ALG240 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670ALG240, its terminal assignment, data allocation, signal type, power arrangement, and the documented required biu revision value 2.0 or later before migration.

GE IC670ALG240 GE Fanuc sixteen-channel grouped analog current input module

Name: IC670ALG240
Brand: General Electric
SKU: IC670ALG240

IC670ALG240

GE Fanuc sixteen-channel grouped analog current input module

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for IC670ALG240

Manufacturer:

General Electric

Product Category:

PLC Systems

Spare Part Number:

IC670ALG240

Estimated shipping dimensions:

5.3x8.5x8.1cm

Weight:

0.25 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Input channels:

Input-current span:

0 to 25 mA

Input shunt:

250 ohm

A/D resolution:

16 bits

Digital counts:

0 to 65535 for 0 to 25 mA

Resolution per LSB:

0.38 microA

All-channel conversion:

Approximately 1 ms

Analog input data:

16 words

Status data:

88 bits optional

Fault-clear data:

16 bits optional

Filter selections:

10 ms or 20 ms

Line-frequency selections:

50 Hz or 60 Hz

Required BIU revision:

2.0 or later

Information

Overview Manuals Common Applications Product Precautions

GE IC670ALG240 is ge fanuc sixteen-channel grouped analog current input module. It scans sixteen common-return current inputs and reports scaled values, channel alarms and open-wire status to the Field Control host.

Scans sixteen current-loop channels
Uses a 16-bit converter with 0.38 microA steps
Completes an all-channel conversion in about 1 ms
Supports channel alarms and latched fault clearing

IC670ALG240 operates with Two-wire or three-wire transmitters, Common analog return, Field Control BIU revision 2.0 or later, Configured I and Q diagnostic data.

Engineered applications include sixteen-channel process-current acquisition field station, Remote I/O cabinet integration, Installed-base module renewal, Controlled commissioning and diagnostics.

Important Notice: Confirm the shared analog return, transmitter power arrangement, 50/60 Hz selection, software filter and status-bit allocation before loop tests.

Apter Power IC670ALG240 Manuals and Guides

Apter Power IC670ALG240 Technical Data and System Reference PDF IC670ALG240 Field Installation and Commissioning Workbook PDF

The first document presents model-specific technical data and system identity. The second provides a separate installation, wiring and commissioning workflow.

sixteen-channel process-current acquisition field station

Performs the documented sixteen-channel process-current acquisition function at a distributed Field Control station.

Remote I/O cabinet integration

Exchanges configured process data with the host through the installed bus interface.

Installed-base module renewal

Restores an exact catalog-number position while preserving terminal and data identity.

Controlled commissioning and diagnostics

Supports staged wiring, configuration, diagnostic and functional verification.

Read the applicable GE Fanuc Field Control instructions before work. Verify IC670ALG240, its terminal assignment and the installed station configuration.

Verify the complete IC670ALG240 catalog marking and assigned Field Control position before work.

Place the connected sixteen-channel process-current acquisition process in its approved maintenance state before disturbing the station.

Isolate BIU and field power, then confirm a safe condition at the IC670ALG240 terminal block.

Label and record channel conductors, returns, shields and external supply wiring before disconnecting any conductor from IC670ALG240.

Use ESD controls and protect the module connector, terminal block keying and exposed electronics.

Restore only the documented channel range, scaling, alarms and default behavior; do not copy settings from an adjacent module.

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.

Complete low, midpoint and high signal checks plus alarm and diagnostic verification and retain the final result before returning the process to service.

FAQS

What Field Control function is assigned to IC670ALG240?

IC670ALG240 is ge fanuc sixteen-channel grouped analog current input module. It scans sixteen common-return current inputs and reports scaled values, channel alarms and open-wire status to the Field Control host.
Which station hardware must be paired with IC670ALG240?

Use IC670ALG240 with the documented Field Control terminal block, compatible BIU or MFP, and the installed two-wire or three-wire transmitters.
Which IC670ALG240 identity should be checked before installation?

Confirm the full IC670ALG240 catalog marking and the catalog number value IC670ALG240 against the installed station record.
How should field wiring be transferred when replacing IC670ALG240?

Label and record channel conductors, returns, shields and external supply wiring before disconnecting any conductor from IC670ALG240.
Which configuration item is critical when commissioning IC670ALG240?

Restore only the documented channel range, scaling, alarms and default behavior; do not copy settings from an adjacent module.
What diagnostic checks apply to IC670ALG240?

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.
How should the IC670ALG240 signal path be functionally tested?

Complete low, midpoint and high signal checks plus alarm and diagnostic verification and retain the final result before returning the process to service.
Can IC670ALG240 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670ALG240, its terminal assignment, data allocation, signal type, power arrangement, and the documented required biu revision value 2.0 or later before migration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

IC670ALG240

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for IC670ALG240

Technical specifications for IC670ALG240

Information

Information