Which station hardware must be paired with IC670MDL330?

Use IC670MDL330 with the documented Field Control terminal block, compatible BIU or MFP, and the installed 10 to 132 v ac field supply.

Which IC670MDL330 identity should be checked before installation?

Confirm the full IC670MDL330 catalog marking and the catalog number value IC670MDL330 against the installed station record.

Can IC670MDL330 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670MDL330, its terminal assignment, data allocation, signal type, power arrangement, and the documented isolation value 250 V AC continuous; 1500 V AC for 1 minute before migration.

GE IC670MDL330 GE Fanuc sixteen-point 12-120 VAC one-amp discrete output module

Name: IC670MDL330
Brand: General Electric
SKU: IC670MDL330

IC670MDL330

GE Fanuc sixteen-point 12-120 VAC one-amp discrete output module

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for IC670MDL330

Manufacturer:

General Electric

Product Category:

PLC Systems

Spare Part Number:

IC670MDL330

Estimated shipping dimensions:

5.5x8.6x8.2cm

Weight:

0.22 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Output points:

16; one group

Rated voltage:

12 to 120 V AC

Output-voltage range:

10 to 132 V AC; 47 to 63 Hz

Maximum point current:

1 A

Maximum module current:

4 A with derating

Minimum load current:

10 mA per point

Inrush current:

10 A maximum for one 20 ms cycle

Output-voltage drop:

2.0 V maximum

Leakage current:

Less than 2 mA at 120 V AC

On/off response:

Less than one-half cycle

BIU current:

275 mA with all points on

Isolation:

250 V AC continuous; 1500 V AC for 1 minute

Information

Overview Manuals Common Applications Product Precautions

GE IC670MDL330 is ge fanuc sixteen-point 12-120 vac one-amp discrete output module. It switches sixteen AC loads from one grouped field supply and returns output and fuse diagnostic status to the station interface.

Provides sixteen 12-120 VAC outputs
Switches up to 1 A per point
Limits total module load to 4 A with derating
Reports group fuse status to the BIU

IC670MDL330 operates with 10 to 132 V AC field supply, Sixteen AC loads, Field Control terminal block, Compatible BIU or MFP.

Engineered applications include grouped AC actuator and pilot-load switching field station, Remote I/O cabinet integration, Installed-base module renewal, Controlled commissioning and diagnostics.

Important Notice: Confirm load current, 4 A module derating, leakage compatibility and snubber behavior; test fuse diagnostics before enabling automatic commands.

Apter Power IC670MDL330 Manuals and Guides

Apter Power IC670MDL330 Technical Data and System Reference PDF IC670MDL330 Field Installation and Commissioning Workbook PDF

The first document presents model-specific technical data and system identity. The second provides a separate installation, wiring and commissioning workflow.

grouped AC actuator and pilot-load switching field station

Performs the documented grouped ac actuator and pilot-load switching function at a distributed Field Control station.

Remote I/O cabinet integration

Exchanges configured process data with the host through the installed bus interface.

Installed-base module renewal

Restores an exact catalog-number position while preserving terminal and data identity.

Controlled commissioning and diagnostics

Supports staged wiring, configuration, diagnostic and functional verification.

Read the applicable GE Fanuc Field Control instructions before work. Verify IC670MDL330, its terminal assignment and the installed station configuration.

Verify the complete IC670MDL330 catalog marking and assigned Field Control position before work.

Place the connected grouped AC actuator and pilot-load switching process in its approved maintenance state before disturbing the station.

Isolate BIU and field power, then confirm a safe condition at the IC670MDL330 terminal block.

Label and record individual point conductors, group commons and field-power feeds before disconnecting any conductor from IC670MDL330.

Use ESD controls and protect the module connector, terminal block keying and exposed electronics.

Restore only the documented input/output defaults, data reference and fault reporting; do not copy settings from an adjacent module.

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.

Complete point-by-point state, response-time and diagnostic checks and retain the final result before returning the process to service.

FAQS

What Field Control function is assigned to IC670MDL330?

IC670MDL330 is ge fanuc sixteen-point 12-120 vac one-amp discrete output module. It switches sixteen AC loads from one grouped field supply and returns output and fuse diagnostic status to the station interface.
Which station hardware must be paired with IC670MDL330?

Use IC670MDL330 with the documented Field Control terminal block, compatible BIU or MFP, and the installed 10 to 132 v ac field supply.
Which IC670MDL330 identity should be checked before installation?

Confirm the full IC670MDL330 catalog marking and the catalog number value IC670MDL330 against the installed station record.
How should field wiring be transferred when replacing IC670MDL330?

Label and record individual point conductors, group commons and field-power feeds before disconnecting any conductor from IC670MDL330.
Which configuration item is critical when commissioning IC670MDL330?

Restore only the documented input/output defaults, data reference and fault reporting; do not copy settings from an adjacent module.
What diagnostic checks apply to IC670MDL330?

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.
How should the IC670MDL330 signal path be functionally tested?

Complete point-by-point state, response-time and diagnostic checks and retain the final result before returning the process to service.
Can IC670MDL330 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670MDL330, its terminal assignment, data allocation, signal type, power arrangement, and the documented isolation value 250 V AC continuous; 1500 V AC for 1 minute before migration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

IC670MDL330

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for IC670MDL330

Technical specifications for IC670MDL330

Information

Information