Which station hardware must be paired with IC670ALG310?

Use IC670ALG310 with the documented Field Control terminal block, compatible BIU or MFP, and the installed separate user output supply.

Which IC670ALG310 identity should be checked before installation?

Confirm the full IC670ALG310 catalog marking and the catalog number value IC670ALG310 against the installed station record.

Can IC670ALG310 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670ALG310, its terminal assignment, data allocation, signal type, power arrangement, and the documented isolation value 250 V AC continuous; 1500 V AC for 1 minute before migration.

GE IC670ALG310 GE Fanuc eight-channel isolated analog voltage output module

Name: IC670ALG310
Brand: General Electric
SKU: IC670ALG310

IC670ALG310

GE Fanuc eight-channel isolated analog voltage output module

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for IC670ALG310

Manufacturer:

General Electric

Product Category:

PLC Systems

Spare Part Number:

IC670ALG310

Estimated shipping dimensions:

5.3x8.5x8.1cm

Weight:

0.25 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Output channels:

Output grouping:

Two isolated groups of four

Voltage ranges:

+/-10 V; 0 to 10 V

Digital resolution:

14 bits

Output overrange:

Approximately 10.25 V

Analog output data:

0 to 8 words

Status data:

0 to 24 bits

Fault-clear data:

0 to 16 bits

Default output behavior:

Zero or hold last state

Required BIU revision:

2.0 or later

Isolation:

250 V AC continuous; 1500 V AC for 1 minute

Information

Overview Manuals Common Applications Product Precautions

GE IC670ALG310 is ge fanuc eight-channel isolated analog voltage output module. It converts eight host output words into isolated voltage commands arranged as two groups of four channels.

Provides eight isolated voltage outputs
Offers bipolar and unipolar 10 V ranges
Uses 14-bit digital conversion
Reports user-power, calibration and range alarms

IC670ALG310 operates with Separate user output supply, Two groups of voltage-driven field devices, Field Control BIU revision 2.0 or later, Configured analog-output and alarm-clear data.

Engineered applications include isolated analog voltage command generation field station, Remote I/O cabinet integration, Installed-base module renewal, Controlled commissioning and diagnostics.

Important Notice: Confirm group isolation, user power, bipolar/unipolar range, scaling and output-default behavior before connecting field loads.

Apter Power IC670ALG310 Manuals and Guides

Apter Power IC670ALG310 Technical Data and System Reference PDF IC670ALG310 Field Installation and Commissioning Workbook PDF

The first document presents model-specific technical data and system identity. The second provides a separate installation, wiring and commissioning workflow.

isolated analog voltage command generation field station

Performs the documented isolated analog voltage command generation function at a distributed Field Control station.

Remote I/O cabinet integration

Exchanges configured process data with the host through the installed bus interface.

Installed-base module renewal

Restores an exact catalog-number position while preserving terminal and data identity.

Controlled commissioning and diagnostics

Supports staged wiring, configuration, diagnostic and functional verification.

Read the applicable GE Fanuc Field Control instructions before work. Verify IC670ALG310, its terminal assignment and the installed station configuration.

Verify the complete IC670ALG310 catalog marking and assigned Field Control position before work.

Place the connected isolated analog voltage command generation process in its approved maintenance state before disturbing the station.

Isolate BIU and field power, then confirm a safe condition at the IC670ALG310 terminal block.

Label and record channel conductors, returns, shields and external supply wiring before disconnecting any conductor from IC670ALG310.

Use ESD controls and protect the module connector, terminal block keying and exposed electronics.

Restore only the documented channel range, scaling, alarms and default behavior; do not copy settings from an adjacent module.

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.

Complete low, midpoint and high signal checks plus alarm and diagnostic verification and retain the final result before returning the process to service.

FAQS

What Field Control function is assigned to IC670ALG310?

IC670ALG310 is ge fanuc eight-channel isolated analog voltage output module. It converts eight host output words into isolated voltage commands arranged as two groups of four channels.
Which station hardware must be paired with IC670ALG310?

Use IC670ALG310 with the documented Field Control terminal block, compatible BIU or MFP, and the installed separate user output supply.
Which IC670ALG310 identity should be checked before installation?

Confirm the full IC670ALG310 catalog marking and the catalog number value IC670ALG310 against the installed station record.
How should field wiring be transferred when replacing IC670ALG310?

Label and record channel conductors, returns, shields and external supply wiring before disconnecting any conductor from IC670ALG310.
Which configuration item is critical when commissioning IC670ALG310?

Restore only the documented channel range, scaling, alarms and default behavior; do not copy settings from an adjacent module.
What diagnostic checks apply to IC670ALG310?

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.
How should the IC670ALG310 signal path be functionally tested?

Complete low, midpoint and high signal checks plus alarm and diagnostic verification and retain the final result before returning the process to service.
Can IC670ALG310 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670ALG310, its terminal assignment, data allocation, signal type, power arrangement, and the documented isolation value 250 V AC continuous; 1500 V AC for 1 minute before migration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

IC670ALG310

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for IC670ALG310

Technical specifications for IC670ALG310

Information

Information