Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for IS420UCSCH1A-H-V0.1-A
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include IS420UCSCH1A-H-V0.1-A and any series, revision or assembly markings. Keep the complete reference on your enquiry and quotation.
-
Check the offered item before ordering
Compare current label, connector and mounting photos with the installed equipment and approved configuration.
Technical specifications for IS420UCSCH1A-H-V0.1-A
-
Manufacturer:General Electric
-
Product Category:Gas Turbine Control
-
Spare Part Number:IS420UCSCH1A-H-V0.1-A
-
Weight:1.52 kg
-
Tariff Code:8537101190
-
Product series:Mark VIe
-
Base reference:IS420UCSCH1A
-
Base processor:AMD GX-412HC
-
Base CPU frequency:1.2 GHz
-
Base CPU cores:Four; two Mark VIe cores
-
Base memory:4 GB DDR3-1333 with ECC
-
Base storage:40 GB pSLC SSD; 16 GB used
-
Base Ethernet ports:Six 100 Mbps ports
-
Base additional ports:Two USB 2.0; RJ-45 console
-
Base nominal supply:24 / 28 V DC
-
Base supply range:18 to 30 V DC
-
Base maximum power:31 W
-
Base operating temperature:-40 to 70 °C
-
Base cooling:Convection; vertical orientation
-
Base PROFINET capability:Supported in the applicable configured system
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- GE IS420UCSCH1A-H-V0.1-A belongs in the identification record for the installed Mark VIe controller. Match its complete label and software configuration before restoring the application and network relationships.
Offered model: IS420UCSCH1A-H-V0.1-A
Base reference: IS420UCSCH1A
Base processor: 1.2 GHz quad-core AMD
Control platform: Mark VIe
Base reference: IS420UCSCH1A
Base processor: 1.2 GHz quad-core AMD
Control platform: Mark VIe
GE IS420UCSCH1A-H-V0.1-A is offered as a Mark VIe UCSC controller for application processing and Ethernet communication in a configured control system. The IS420UCSCH1A base design uses a 1.2 GHz quad-core AMD GX-412HC processor with two Mark VIe cores and 4 GB DDR3-1333 ECC memory. Its base storage is a 40 GB pSLC SSD with 16 GB used.
The base design provides six 100 Mbps Ethernet ports, two USB 2.0 ports and an RJ-45 console connection. PROFINET capability applies in the supported system configuration. Nominal supply is 24/28 V DC within an 18 to 30 V DC range, with 31 W maximum power. Convection cooling requires vertical orientation, and the base operating-temperature range is -40 to 70 °C.
Keep the complete IS420UCSCH1A-H-V0.1-A marking separate from the IS420UCSCH1A base reference. The installed QNX version and application behavior depend on the software configuration. Base-design figures do not identify the supplied firmware, application image, hardware revision or suitability for a particular redundant controller set; these must match the intended system.
The base design provides six 100 Mbps Ethernet ports, two USB 2.0 ports and an RJ-45 console connection. PROFINET capability applies in the supported system configuration. Nominal supply is 24/28 V DC within an 18 to 30 V DC range, with 31 W maximum power. Convection cooling requires vertical orientation, and the base operating-temperature range is -40 to 70 °C.
Keep the complete IS420UCSCH1A-H-V0.1-A marking separate from the IS420UCSCH1A base reference. The installed QNX version and application behavior depend on the software configuration. Base-design figures do not identify the supplied firmware, application image, hardware revision or suitability for a particular redundant controller set; these must match the intended system.
Controller platform reference: GE Mark VIe UCSC. Match the complete label, software and installed configuration.
Technical downloads for General Electric IS420UCSCH1A-H-V0.1-A: original technical-reference excerpts and an Apter Power installation and commissioning guide.
-
General Electric IS420UCSCH1A-H-V0.1-A technical reference
Original manufacturer excerpt. Figures identify the IS420UCSCH1A base design; confirm the complete H-V0.1-A unit, software and system configuration separately. PDF, 2 pages, 728 KB. -
General Electric IS420UCSCH1A-H-V0.1-A installation guide
Prepared by Apter Power. Product identification, configuration checks, installation preparation and functional acceptance. PDF, 5 pages, 25.9 KB.
The technical reference preserves selected manufacturer pages. The installation guide is compiled by Apter Power for preparation and review; apply the original operating procedures and site controls during work.
Controller and configuration context: The offered identity is IS420UCSCH1A-H-V0.1-A. IS420UCSCH1A base-design values support hardware identification; software, network roles and redundancy require the installed system configuration.
Application scope: The following describe turbine and plant-control engineering contexts. Confirm the complete controller marking and approved application before replacement; platform membership is not a universal compatibility claim.
Application scope: The following describe turbine and plant-control engineering contexts. Confirm the complete controller marking and approved application before replacement; platform membership is not a universal compatibility claim.
-
Turbine application control
Run the approved Mark VIe application within the configured controller system. Retain the software revision, I/O relationships and machine protection architecture. -
Balance-of-plant coordination
Use the controller within an engineered plant-control configuration. Verify application capacity, communication roles and the actual connected equipment. -
Ethernet I/O integration
Restore the assigned control-network interfaces and I/O relationships. Six physical Ethernet ports do not make their configured network roles interchangeable. -
Controller replacement planning
Compare the complete offered label with the installed controller, application backup and redundancy arrangement. Confirm compatibility before loading software or reconnecting control networks.
Match IS420UCSCH1A-H-V0.1-A to the installed hardware and approved configuration before replacement or commissioning.
Retain the complete marking
Record IS420UCSCH1A-H-V0.1-A, all additional labels and the installed controller identity. Do not reduce the replacement record to the base number alone.
Preserve software and configuration
Back up the approved application, firmware information and network assignments. Do not infer the installed software release from the H-V0.1-A marking.
Verify the controller supply
The base reference uses 18 to 30 V DC with 24/28 V DC nominal and 31 W maximum. Confirm applicability to the offered unit and the actual power connection before installation.
Maintain cooling orientation
The base controller uses convection cooling in a vertical orientation. Preserve the cabinet airflow, mounting arrangement and environmental conditions required by the system.
Restore network roles
Label cables and retain the original Ethernet port assignments. Verify network isolation and communication roles before reconnecting the controller.
Commission within the system
Use the approved GE and site procedure to verify software, I/O communications, diagnostics and any redundant-set behavior before operational release.
Alternative Names
IS420UCSCH1A H V0.1 A
Technical notes
System relationship: Preserve the approved software, application backup and network configuration.
Configuration boundary: Figures identify the IS420UCSCH1A base design; confirm the complete H-V0.1-A unit, software and system configuration separately.
Technical reference: GE Vernova Mark VIe UCSE Fact Sheet, GEA35665 (October 2024), UCSCH1A/B hardware comparison.
FAQ View All FAQ
-
What is the base hardware reference for IS420UCSCH1A-H-V0.1-A?IS420UCSCH1A is the base reference. Keep the complete H-V0.1-A marking for the offered unit and separately verify its software, revision and installed-system configuration.
-
Which processor is associated with the base design of IS420UCSCH1A-H-V0.1-A?The IS420UCSCH1A base design uses an AMD GX-412HC processor at 1.2 GHz, with four CPU cores and two Mark VIe cores.
-
What memory and storage describe the base design of IS420UCSCH1A-H-V0.1-A?The base design has 4 GB DDR3-1333 ECC memory and a 40 GB pSLC SSD with 16 GB used. These hardware figures do not identify the installed application image.
-
How many Ethernet ports does the base design of IS420UCSCH1A-H-V0.1-A provide?It provides six 100 Mbps Ethernet ports. Restore the assigned port roles and control-network relationships from the approved system configuration.
-
What supply range describes the base hardware of IS420UCSCH1A-H-V0.1-A?The base hardware range is 18 to 30 V DC, with 24/28 V DC nominal and 31 W maximum power. Verify the offered-unit label and installed power arrangement before connection.
-
What cooling arrangement applies to the base design of IS420UCSCH1A-H-V0.1-A?The base design uses convection cooling with a vertical mounting orientation and a -40 to 70 °C operating range. The complete cabinet installation must maintain the applicable environmental conditions.
-
Can IS420UCSCH1A-H-V0.1-A be assigned a QNX version from the model suffix alone?No. The base platform can use QNX 6.5 or 7.1 according to its software configuration. Confirm the actual firmware and application requirements from the installed system records.
-
Does the base reference prove redundant-set compatibility for IS420UCSCH1A-H-V0.1-A?No. The full controller identity, installed software, application and approved redundant-set configuration must be matched before replacement or commissioning.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.