The GE HE693SNP900 from Horner Electric functions as an SNP slave interface module. This module supports the Series 90-30 communication protocols and includes one RS-232 port and one RS-485 port for connectivity.
- HE693SNP900 SNP Slave Interface Module
- Supports SNP Communication Protocol for Industrial Networks
- Enables Slave Device Communication with Host Controllers
The HE693SNP900 is a Horner Electric SNP Slave Module designed for GE Fanuc Series 90-30 PLCs, providing an additional RS-422/RS-485 communication port (via 15-pin connector) for connecting operator interfaces or programming devices.
Important Notice:
Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
GE HE693SNP900 SNP Slave Interface Module Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Communication Expansion: When the built-in ports of the 90-30 CPU are insufficient or the protocol does not match, this module can provide an independent SNP/SNP-X communication link.
Multi interface support: The onboard interface supports RS-232, RS-422, and RS-485 physical standards, adapting to different wiring distances and anti-interference requirements.
Protocol conversion: It operates as a master or slave, handling complex communication logic and reducing the computational burden on the PLC main CPU.