• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Speak to a sourcing specialist
      sales13@apterpower.com
      About Us Contact Us
      +86 18030235313 Need the right part?We are here to help.

      EZ1900-003-ADAP-1

      PR Sensor Adapter
      Ships by Thursday, November 12
      Product image is representative; revision or series may vary. Contact us to request a specific version.

      Product Describe：

      Emerson EZ1900-003-ADAP-1 connects the specified PR6424, PR6425 or PR6426 eddy-current sensor versions to an AMS EZ1000 converter. It provides the required sensor-side interface for a matched converter and probe configuration.
      • Manufacturer part number
        EZ1900-003-ADAP-1
      • Shipping
        Swift global dispatch
      • Condition
        New, original product
      • Shipping size (est.)
        20cm x 20cm x 1.5cm
      • Country of Origin
        USA

      Ask our team:

      Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com
      Dispatch Planning
      Confirm stock and lead time with our team.
      Dedicated Manager
      Personalized one-to-one VIP service
      ISO 9001:2015 Certified
      Trusted quality management
      Get a quick price for EZ1900-003-ADAP-1
      E-mail *
      Mobile *
      Company
      Content *
      Quantity *
      Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
      Get a Quote
      For more information on how your data is processed and stored by Apterpower please read our privacy policy

      What happens after you enquire

      • 0

        Review your reference

        Send the complete Emerson EZ1900-003-ADAP-1 reference, label photographs and required quantity. Include adapter, probe and converter labels and the converter firmware.

      • 1

        Confirm the offer

        Review the offered revision, condition, included items and documents against the confirmed installation.

      • 2

        Arrange dispatch

        Confirm quantity, dispatch date, lead-time start and delivery details in the quotation.

      • Match the complete marking

        Match the complete Emerson EZ1900-003-ADAP-1 marking and the installed configuration. Compare ADAP-1 and the complete PR sensor code with the converter configuration.

      • Check the offered item before ordering

        Please request clear photographs of Emerson EZ1900-003-ADAP-1, including its complete label and interfaces. Ask your maintenance team to compare the offered unit with the installed equipment and the applicable Emerson AMS EZ 1000 converter operating manual before approving the order.

      Technical specifications for EZ1900-003-ADAP-1

      • Manufacturer:
        Emerson
      • Product Category:
        Machinery Monitoring Systems
      • Spare Part Number:
        EZ1900-003-ADAP-1
      • Weight:
        0.08 kg
      • Tariff Code:
        8537101190
      • Supported PR6424 versions:
        PR6424/0xx-xx0
      • Supported PR6425 versions:
        PR6425/010-1x0
      • Supported PR6426 versions:
        PR6426/0x0-xx0
      • Required converter firmware:
        1.0.6 or higher for these PR sensors
      • Converter interface:
        Push-in locking connection; no cap nut
      • Release method:
        Pull connector from sensor socket
      • Connection insulation:
        Black heat-shrink at sensor joint
      • Additional Ex insulation:
        Blue heat-shrink where required by installation
      View as PDF Ask for Quote

      Information

      Overview Downloads Applications / Compatibility Product Precautions
      • Emerson EZ1900-003-ADAP-1 supports integration of the listed PR sensor families with the EZ1000 measurement chain. Its converter-side connector locks with an audible click, while the final response remains determined by the selected probe, target and converter calibration.
      Compatible probes: PR6424/0xx-xx0, PR6425/010-1x0, PR6426/0x0-xx0
      Converter firmware: 1.0.6 or higher for the listed PR sensors
      Converter connection: Push-in locking connector without cap nut
      The ADAP-1 adapter is specified for PR6424/0xx-xx0, PR6425/010-1x0 and PR6426/0x0-xx0 sensor versions. It is not the ADAP-2 interface for Bently Nevada 33010x probes and is not the ADAP-90 space-saving connector for EZ108x sensors. The complete adapter and sensor markings must therefore be retained.

      At the converter end, insert the connector into the sensor socket until it locks with an audible click. This adapter connection has no cap nut; pulling the connector releases it. The opposite end mates with the applicable PR sensor connector. The joint requires the specified insulation, with additional provisions for a hazardous-area installation where applicable.

      The listed PR sensor support requires converter firmware 1.0.6 or higher. The current converter manual distinguishes hardware variants and revision boundaries, so the installed converter must be checked before applying its configuration procedure. The adapter itself does not set sensitivity, measuring range, power supply or a universal operating gap; those belong to the complete calibrated transducer chain.
      Controller platform reference: AMS EZ 1000 with supported PR sensors. Match adapter, sensor version and converter firmware.
      Technical material for Emerson EZ1900-003-ADAP-1 covers exact adapter identity, supported PR versions, converter firmware and connection procedure. The separate installation guide covers adapter selection, locking connection, joint insulation and complete-chain commissioning.
      Original manufacturer pages retain their technical context. Use the Apter Power guide with the applicable manufacturer instructions and approved installation design.
      System and supply context: Use ADAP-1 between the specified PR6424, PR6425 or PR6426 versions and a compatible EZ1000 converter. The probe and converter are separate items and require a matched calibration.

      Application scope: Integration can retain a supported PR measurement point while connecting to an EZ1000 conditioner. Electrical range and target response remain properties of the complete transducer system.
      Prepare Emerson EZ1900-003-ADAP-1 for its configured installation using these checks.
      Retain ADAP-1 identity

      Do not exchange ADAP-1, ADAP-2 and ADAP-90 based only on similar names.

      Check complete sensor code

      Verify the supported PR sensor family and suffix pattern.

      Verify firmware

      Use converter firmware 1.0.6 or higher for the stated PR sensors.

      Use the locking connector

      Insert until the audible click; do not attempt to tighten a nonexistent cap nut.

      Insulate the joint

      Apply the required heat-shrink and relevant hazardous-area provisions.

      Test the whole chain

      Verify target movement and converter output before accepting the adapted measurement point.

      Alternative Names

      Emerson EZ1900-003-ADAP-1 Emerson EZ1900-003-ADAP-1 Sensor Adapter

      Technical notes

      Signal relationship: ADAP-1 changes the connector interface required by the listed PR sensors; it does not convert an arbitrary probe into an approved EZ1000 measuring chain. Verify the precise sensor suffix and converter calibration.

      Installation boundary: Use the locking mechanism described for ADAP-1. A threaded-cap procedure for another connector must not be transferred to this cap-nut-free adapter end.

      Technical basis: Emerson AMS EZ 1000 Converter Operating Manual, MHM-97884 Rev. 2.1, March 2026. ADAP-1 compatibility is limited to the listed PR sensor versions. Firmware and commissioning values belong to the connected EZ1000 converter and calibrated chain, not an independent adapter rating.

      FAQ View All FAQ

      • Which PR6425 version connects through EZ1900-003-ADAP-1?
        The specified family is PR6425/010-1x0. Other PR6425 suffixes must not be assumed compatible merely because they share the same family name.
      • What converter firmware is needed when using EZ1900-003-ADAP-1 with the listed PR sensors?
        The listed PR6424, PR6425 and PR6426 support starts at firmware 1.0.6. Confirm the actual converter hardware and firmware before configuration.
      • Does the converter end of EZ1900-003-ADAP-1 require a cap nut?
        No. The ADAP-1 converter connector is identified without a cap nut. Push it into the sensor socket until it locks with an audible click.
      • How is EZ1900-003-ADAP-1 disconnected from the converter sensor socket?
        Release it by pulling the connector out of the socket according to the specified connector procedure. Handle the connector body rather than pulling on the cable.
      • Can EZ1900-003-ADAP-1 be substituted for the ADAP-2 used with a 33010x probe?
        No. ADAP-1 is assigned to the listed PR sensor versions. ADAP-2 is the separately specified interface for Bently Nevada 33010x probes.
      • Does EZ1900-003-ADAP-1 determine the measurement scale factor?
        No. Scale factor and measuring range depend on the probe, target and matched EZ1000 calibration. The adapter supplies the specified interconnection.
      • What insulation is required at the sensor joint associated with EZ1900-003-ADAP-1?
        Use the specified black heat-shrink insulation. Additional blue heat-shrink applies where required by the hazardous-area installation instructions.
      • How should the chain containing EZ1900-003-ADAP-1 be verified after connection?
        Check the exact probe selection and calibrated operating point, then apply an approved controlled target displacement and compare the converter output with the expected proportional response.
      Manufacturers

      Supporting new and legacy automation

      Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          PRODUCTS IN SEARCH PAGE ()
          50+ account managers available now
          Related reading

          Related cases and sourcing guidance

          View all case studies
          Manufacturers

          You May Also Like

          Explore related automation components available through Apter Power.
          Manufacturers

          Product Browsing History

          Revisit the products you recently viewed on Apter Power.
          SPEAK TO OUR TEAM
          Let’s find the right solution for you.
          Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.

          • Whatsapp: +86 18030235313

            Send us a message.

          • sales13@apterpower.com

            Complete our online form.

          • +86 18030235313

            Speak to our team in your native language.