• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Speak to a sourcing specialist
      sales13@apterpower.com
      About Us Contact Us
      +86 18030235313 Need the right part?We are here to help.

      EZ1081-03-00-010 + EZ1901-090

      Armoured Eddy-Current Probe and Extension
      Ships by Thursday, November 12
      Product image is representative; revision or series may vary. Contact us to request a specific version.

      Product Describe：

      Emerson EZ1081-03-00-010 + EZ1901-090 combines an 8 mm M10 × 1 armoured proximity probe with an armoured extension cable. The 30 mm case, 1 m integral lead and 9 m extension form a 10 m electrical chain for a matched EZ1000 converter.
      • Manufacturer part number
        EZ1081-03-00-010 + EZ1901-090
      • Shipping
        Swift global dispatch
      • Condition
        New, original product
      • Shipping size (est.)
        17cm x 17cm x 2cm
      • Country of Origin
        USA

      Ask our team:

      Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com
      Dispatch Planning
      Confirm stock and lead time with our team.
      Dedicated Manager
      Personalized one-to-one VIP service
      ISO 9001:2015 Certified
      Trusted quality management
      Get a quick price for EZ1081-03-00-010 + EZ1901-090
      E-mail *
      Mobile *
      Company
      Content *
      Quantity *
      Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
      Get a Quote
      For more information on how your data is processed and stored by Apterpower please read our privacy policy

      What happens after you enquire

      • 0

        Review your reference

        Send the complete Emerson EZ1081-03-00-010 + EZ1901-090 reference, label photographs and required quantity. Include photographs of both cable labels and the converter calibration reference.

      • 1

        Confirm the offer

        Review the offered revision, condition, included items and documents against the confirmed installation.

      • 2

        Arrange dispatch

        Confirm quantity, dispatch date, lead-time start and delivery details in the quotation.

      • Match the complete marking

        Match the complete Emerson EZ1081-03-00-010 + EZ1901-090 marking and the installed configuration. Compare both component labels and the 10 m calibrated chain.

      • Check the offered item before ordering

        Please request clear photographs of Emerson EZ1081-03-00-010 + EZ1901-090, including its complete label and interfaces. Ask your maintenance team to compare the offered unit with the installed equipment and the applicable Emerson AMS EZ 1000 sensor installation guide before approving the order.

      Technical specifications for EZ1081-03-00-010 + EZ1901-090

      • Manufacturer:
        Emerson
      • Product Category:
        Machinery Monitoring Systems
      • Spare Part Number:
        EZ1081-03-00-010 + EZ1901-090
      • Weight:
        0.2 kg
      • Tariff Code:
        8537101190
      • Sensing tip:
        8 mm
      • Mounting thread:
        M10 × 1
      • Case length:
        30 mm
      • Ordered unthreaded section:
        00; fixed 5 mm tip neck still present
      • Integral lead:
        1 m; armoured
      • Extension cable:
        9 m; armoured
      • Total electrical length:
        10 m
      • Nominal sensitivity:
        8 V/mm ISO; 7.87 V/mm API
      • Nominal gap:
        1.5 mm
      • Probe temperature:
        -35 to +180 °C, including 1 m lead
      • Extension / connector temperature:
        -35 to +150 °C
      • Armoured-cable bend radius:
        Minimum 35 mm
      View as PDF Ask for Quote

      Information

      Overview Downloads Applications / Compatibility Product Precautions
      • The 30 mm case provides a short mounting body while the 9 m armoured extension reaches a more remote converter location. Its 10 m total cable length must remain matched to the EZ1000 calibration instead of borrowing the standard 5 m performance boundary.
      Probe configuration: 8 mm tip, M10 × 1, 30 mm case
      Cable chain: 1 m probe lead + 9 m armoured extension
      Converter matching: 10 m complete electrical length
      The EZ1081 probe uses a GF30 PEEK sensing tip, stainless-steel body and protected cable construction. Its selected 30 mm case has the ordered unthreaded section set to 00. A fixed 5 mm neck remains behind the tip and must not be treated as available mounting thread.

      The EZ1901 extension contributes 9 m to the 10 m chain. A compatible EZ1000 converter must be calibrated for the complete assembly and intended target. The nominal scale factor is 8 V/mm for ISO calibration or 7.87 V/mm for API calibration; a 1.5 mm nominal gap is a reference point within the matched system.

      The 10 m electrical chain uses the general recommended dynamic range of no more than 1250 µm peak-to-peak. The separate 2000 µm recommendation for a standard 5 m API-calibrated chain must not be assigned to this configuration. Probe and integral cable operation is -35 to +180 °C, while extension cables and connectors are limited to -35 to +150 °C.
      Controller platform reference: AMS EZ 1000 transducer system. Match the complete 10 m chain and target calibration.
      Technical material for Emerson EZ1081-03-00-010 + EZ1901-090 covers probe construction, 30 mm case selection, 9 m armoured extension and calibrated-chain limits. The separate installation guide covers 30 mm mounting, 10 m chain identification, armoured cable routing and target-response verification.
      Original manufacturer pages retain their technical context. Use the Apter Power guide with the applicable manufacturer instructions and approved installation design.
      System and supply context: Use the stated probe and extension with an EZ1000 converter calibrated for 10 m and the intended target. The converter, mounting hardware and protection monitor are separate items.

      Application scope: The 30 mm case provides a short mounting body while the 9 m armoured extension reaches a more remote converter location. Its 10 m total cable length must remain matched to the EZ1000 calibration instead of borrowing the standard 5 m performance boundary.
      Prepare Emerson EZ1081-03-00-010 + EZ1901-090 for its configured installation using these checks.
      Preserve electrical length

      Do not cut or splice the 10 m chain or exchange extension lengths without matching calibration.

      Keep the tip clear

      Maintain the specified target area, surrounding-metal clearance and fixed neck clearance.

      Control torque

      Limit EZ108x locknut torque to 15 N·m and prevent cable twisting.

      Separate temperature limits

      Keep extension cables and connectors within +150 °C even if the probe location permits +180 °C.

      Protect the joint

      Use the specified hand-tightened connection and heat-shrink insulation; apply additional hazardous-area requirements where relevant.

      Check the operating point

      Verify gap, target response and channel indication before restoring machinery monitoring.

      Alternative Names

      EZ1081-03-00-010 + EZ1901-090 Emerson EZ1081-03-00-010 + EZ1901-090 EZ1081-03-00-010 / EZ1901-090

      Technical notes

      Signal relationship: Total electrical length is 1 m + 9 m = 10 m. Mechanical case length does not change this calculation and does not establish the displacement range.

      Installation boundary: Keep the armoured cable bend radius at least 35 mm and stored loop diameter at least 100 mm. Avoid continuous oil immersion and direct oil-stream exposure; leave allowance for installation and thermal movement.

      Technical basis: Emerson AMS EZ 1000 Sensor Installation Guide, MHM-97883 Rev. 1.09, January 2025. The order-code tables map the 30 mm EZ1081 probe and 9 m EZ1901 extension to a 10 m chain. Performance remains conditional on target and matched converter calibration.

      FAQ View All FAQ

      • Can the 9 m extension in EZ1081-03-00-010 + EZ1901-090 be replaced by a 4 m cable without recalibration?
        No. That would change the total electrical length from 10 m to 5 m. The complete probe, extension and converter calibration must match.
      • What limits the mounting depth of EZ1081-03-00-010 + EZ1901-090?
        The selected case is 30 mm long with the ordered unthreaded section set to 00. The fixed 5 mm neck behind the tip must remain free; the available thread cannot be inferred by treating the whole case as usable mounting thread.
      • Is the 5 m API dynamic-range allowance valid for EZ1081-03-00-010 + EZ1901-090?
        No. This is a 10 m combination. The general recommended dynamic range is at most 1250 µm peak-to-peak; the special 2000 µm value is restricted to the stated 5 m reference chain.
      • Why should the connector of EZ1081-03-00-010 + EZ1901-090 be placed outside a +180 °C zone?
        The extension cable and connector limit is +150 °C. The higher +180 °C value belongs to the probe with its integral 1 m cable and does not extend to the joint.
      • How does a nearby counterbore affect installation of EZ1081-03-00-010 + EZ1901-090?
        Nearby metal changes the eddy-current field. The 8 mm probe requires appropriate counterbore clearance; a 24 mm diameter is recommended rather than fitting the tip tightly inside surrounding metal.
      • What maximum locknut torque applies to EZ1081-03-00-010 + EZ1901-090?
        The EZ108x probe locknut limit is 15 N·m. Hold the case correctly so tightening does not twist the cable.
      • Why is continuous oil immersion unsuitable for the extension in EZ1081-03-00-010 + EZ1901-090?
        The installation guidance excludes continuous immersion in oil and direct oil-stream exposure. Route and support the cable so the joint remains protected from that service condition.
      • How is the measuring gap of EZ1081-03-00-010 + EZ1901-090 established after assembly?
        Use the matched converter and target to set the electrical operating point. The 1.5 mm nominal gap is a reference geometry, not a substitute for checking the actual calibrated output.
      Manufacturers

      Supporting new and legacy automation

      Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          PRODUCTS IN SEARCH PAGE ()
          50+ account managers available now
          Related reading

          Related cases and sourcing guidance

          View all case studies
          Manufacturers

          You May Also Like

          Explore related automation components available through Apter Power.
          Manufacturers

          Product Browsing History

          Revisit the products you recently viewed on Apter Power.
          SPEAK TO OUR TEAM
          Let’s find the right solution for you.
          Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.

          • Whatsapp: +86 18030235313

            Send us a message.

          • sales13@apterpower.com

            Complete our online form.

          • +86 18030235313

            Speak to our team in your native language.