-
Match the complete marking
Include 5X00481G01 and any assembly or revision marking visible on the supplied module. Keep the exact reference on your enquiry and quotation. -
Check the offered item before ordering
Request available label, board and connector photographs. Have your maintenance team compare the offered 5X00481G01 reference with the installed OCR1100 controller arrangement and applicable Emerson documentation.
Technical specifications for 5X00481G01
-
Manufacturer:Emerson
-
Product Category:DCS Systems
-
Spare Part Number:5X00481G01
-
Weight:0.36 kg
-
Tariff Code:8537101190
-
Controller role:Atom CPU processing module
-
Interface:Copper RJ45
-
Platform:Emerson Ovation OCR1100
-
Module scope:CPU module
-
Bus structure:CompactPCI
-
Processor base frequency:1.1 GHz
-
Memory:1 GB Flash + 256 MB RAM
-
Originated points:Up to 32,000
-
Process control tasks:Up to 5
-
Network ports:4 x 10/100 Mb Ethernet
-
Controller supply:24 VDC, 40 W
-
Operating temperature:0 to 50 deg C
-
Relative humidity:0 to 95% RH
-
Redundancy:Automatic failover in approved pair
-
Programming environment:IEC 61131-3
-
Application storage:Nonvolatile
-
Order suffix:G01
Information
- The module provides the Atom CPU identity within an OCR1100 controller; project compatibility, controller assembly, network interfaces and the approved Ovation database must be reviewed together.
Acceptance sequence: Verify power-up, communication paths and the required controller role after installation.
Handover record: Retain the supplied marking, network assignment and functional-test result.
The OCR1100 platform uses a CompactPCI structure and can support configured control tasks, Ethernet networking and Ovation I/O integration. These are controller-platform capabilities; the single CPU module should not be treated as a complete controller, cabinet or independent I/O device.
Before exchange, preserve the approved Ovation database, controller settings, network identity and redundancy state. After installation, prove controller health, network communication, application execution and representative I/O paths under an approved plant test plan.
-
Emerson 5X00481G01 technical reference
Apter Power reference with verified manufacturer data and exact-model applicability. -
Emerson 5X00481G01 engineering guide
Apter Power installation, configuration, diagnostic and acceptance guidance.
Platform applications: The uses below depend on the installed controller configuration and approved system design.
-
OCR1100 controller processing
Provide the CPU module identity inside a configured Ovation OCR1100 controller. -
Ovation process control
Execute the approved controller database and task schedule as part of the complete platform. -
Ethernet controller networking
Support the copper-RJ45 controller option when matched to the installed network design. -
Lifecycle replacement
Restore the approved application, communication and redundancy configuration after a controlled exchange.
Save the approved Ovation database, configuration and tuning before hardware work.
Compare 5X00481G01, controller revision and copper-RJ45 option with the installed records.
Handle the CPU module under the site electrostatic-discharge procedure.
Inspect CompactPCI seating, retention and companion controller hardware before energizing.
Apply only the approved controller and network configuration; avoid duplicate addresses.
Verify diagnostics, application execution, communications and representative I/O before release.
Alternative Names
Technical notes
Installation relationship: Install only within the approved OCR1100 controller assembly using the site ESD, isolation and configuration-restoration procedure.
Platform boundary: Controller capacity, supply and environmental figures describe the complete OCR1100 platform, not an isolated CPU-module rating.
Technical reference: Emerson 5X00481G01 PWS_010199 and OCR1100 Controller PWS_002863.
FAQ View All FAQ
-
What must be backed up before replacing Emerson 5X00481G01?Archive the approved Ovation application, database, configuration, tuning, network identity and controller revision so the installed control strategy can be restored and compared.
-
How should Emerson 5X00481G01 be distinguished from an entire OCR1100 controller?The exact sheet identifies it as the Atom CPU module. Power, I/O capacity, cabinet and system-level environmental values belong to the complete configured OCR1100 controller.
-
What network check is critical for Emerson 5X00481G01?Confirm the installed copper-RJ45 arrangement, controller network identity, port connections and approved switch topology before reconnection.
-
How should redundancy be handled when Emerson 5X00481G01 is exchanged?Record primary and standby states, synchronization and failover readiness. Follow the approved Ovation procedure and prove the pair only in a permitted plant state.
-
What does a controller startup fault after fitting Emerson 5X00481G01 require?Check module seating, controller power, compatible hardware revision, boot diagnostics and restored configuration before changing application logic.
-
How is application compatibility verified for Emerson 5X00481G01?Compare the target OCR1100 controller revision, Ovation software release, archived database and installed I/O architecture with the approved engineering record.
-
What functional test should follow installation of Emerson 5X00481G01?Verify controller health, network communication, task execution, alarms and representative local or remote I/O paths without forcing unapproved process outputs.
-
What information should be retained after servicing Emerson 5X00481G01?Record the full part number, controller position, hardware and software revisions, restored database identity, network checks, redundancy result and as-left diagnostics.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.









